itgle.com

Which two statements regarding configuring high availabily in the Cisco UCS is correct?（）A、High availability is enabled during the configuration of either HSRP or VRRP from global configuration modeB、High availability is configured during the initial set

题目

Which two statements regarding configuring high availabily in the Cisco UCS is correct?（）

  • A、High availability is enabled during the configuration of either HSRP or VRRP from global configuration  mode
  • B、High availability is configured during the initial setup of both Fabric interconnects
  • C、High availability can only be configured via the CMC
  • D、High availability is enabled during theinitial configuration of one of the Fabric  lnterconnects
相似考题

1.To troubleshoot interface problems, you can use both the disable command and the deactivate command. Which two statements are correct?()A.If the interface is disabled, the logical unit will administratively shutdown.B.If the interface is deactivated, the physical interface will administratively shutdown.C.If the interface is deactivated, the interface configuration is ignored during commit.D.If the interface is disabled, the logical unit configuration is ignored during commit.

2.Which type of software would the Cisco Catalyst 2950 Series switches use to deliver intelligent services to networks that require additional security， advanced QoS， and high availability？（）A、 Enhanced ImageB、 StandardImagC、 Cisco IOS softwareD、 Enhanced Multilayer Software Image

3.To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）A、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 linkB、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 linkC、 to two core switches from redundant distribution switches connected with Layer 2 linkD、 to two core switches from redundant distribution switches connected with Layer 3 linkE、 to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

4. The Cisco AutoQoS feature is being used throughout the Company VOIP network.  Which three  statements about this feature are true？（）A、The "mls qos" global configuration command must be entered before configuring AutoQoS.B、CEF must be enabled.C、The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all  configurations generated by Cisco AutoQos.D、CDP must be enabled.E、SNMP must be enabled.

更多“Which two statements regarding configuring high availabily in the Cisco UCS is correct?（）A、High availability is enabled during the configuration of either HSRP or VRRP from global configuration modeB、High availability is configured during the initial setu”相关问题

  • 第1题：

    You want to implement a high availability network using two Cisco routers. You also want to  ensure that the stat of the WAN interfaces can be tracked in doing so.  Which router redundancy  protocol cannot be configured for interface tracking？ （）

    • A、 GLBP
    • B、 HSRP
    • C、 RPR
    • D、 VRRP
    • E、 SLB
    • F、 RPR+
    • G、 None of the other alternatives apply

    正确答案:D

  • 第2题：

    Which phase includes conducting Cisco Unified Communications network traffic analysis and capacity planning in order to ensure high availability（）

    • A、Design
    • B、Prepare
    • C、Maintain
    • D、Optimize

    正确答案:D

  • 第3题：

    Which three statements best describe HSRP configuration on Cisco Nexus switches？（）

    • A、 In a vPC topology， the primary HSRP router will respond to ARP requests， but both HSRP routers will forward data traffic. No additional configuration is required.
    • B、 In a vPC topology， the primary HSRP router will respond to ARP requests， but both HSRP routers will forward data traffic if the peer-gateway feature is enabled.
    • C、 You can configure two overlapping HSRP groups to load share traffic from the connected hosts while providing the default router redundancy.
    • D、 You can use the show standby command to verify HSRP operation and configuration.
    • E、 If you remove the feature hsrp command， all relevant HSRP configuration information isalso removed.

    正确答案:A,C,E

  • 第4题：

    Which two statements about configuration an unconnected Catalyst Express 500 switch from setup mode using a PC are true？（）

    • A、You may use Cisco Network Assistant to set up the initial configuration
    • B、You must use CLI for initial configuration
    • C、You may use either CLI or CAN for configuration
    • D、You may make a direct connection to the PC from any point on the switch
    • E、You may only make a direct connection from the port with the flashing green LED to the PC

    正确答案:A,E

  • 第5题：

    SMB network decision makers commonly site which of the following as typical network requirements?（）

    • A、scalability, effectiveness, high availability, mobility
    • B、cost effectiveness, high availability, hosting multiple protocols, hosting webservers
    • C、QoS, multicast, cost effectiveness, redundancy
    • D、centralization, security, highly available, scalability

    正确答案:A

  • 第6题：

    You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure  it to be installed in a high availability network. On a 3560 EMI switch，  which three types of  interfaces can be used to configure HSRP？（）

    • A、 SVI interface
    • B、 Access port
    • C、 EtherChannel port channel
    • D、 Loopback interface
    • E、 Routed port
    • F、 BVI interface

    正确答案:A,C,E

  • 第7题：

    When will an "all configuration" backup be imported into the Cisco UCS Manager？（）

    • A、 During the initial configuration from the console
    • B、 Once the basic configuration has been applied
    • C、 To restore the configuration on a secondary fabric interconnect
    • D、 To upgrade the firmware on a replacement fabric interconnect

    正确答案:B

  • 第8题：

    Which two statements are true regarding high-availability chassis clustering？（）

    • A、A chassis cluster consists of two devices.
    • B、A chassis cluster consists of two or more devices.
    • C、Devices participating in a chassis cluster can be different models.
    • D、Devices participating in a chassis cluster must be the same models

    正确答案:A,D

  • 第9题：

    单选题
    When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
    A

     During the initial configuration from the console

    B

     Once the basic configuration has been applied

    C

     To restore the configuration on a secondary fabric interconnect

    D

     To upgrade the firmware on a replacement fabric interconnect


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Which statement regaming high availabily in the Cisco UCS is correct?（）
    A

    A node is one of the two（2）CMCs

    B

    A node is one of the two（2）Fabric Interconnects

    C

    A group is a set off our（4）nodes

    D

    Each group is identified by a floating node ID


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    Which two statements are true regarding high-availability chassis clustering？（）
    A

    A chassis cluster consists of two devices.

    B

    A chassis cluster consists of two or more devices.

    C

    Devices participating in a chassis cluster can be different models.

    D

    Devices participating in a chassis cluster must be the same models


    正确答案： C,B
    解析： 暂无解析

  • 第12题：

    多选题
    Which two statements regarding configuring high availabily in the Cisco UCS is correct?（）
    A

    High availability is enabled during the configuration of either HSRP or VRRP from global configuration  mode

    B

    High availability is configured during the initial setup of both Fabric interconnects

    C

    High availability can only be configured via the CMC

    D

    High availability is enabled during theinitial configuration of one of the Fabric  lnterconnects


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    Which statement regaming high availabily in the Cisco UCS is correct?（）

    • A、A node is one of the two（2）CMCs
    • B、A node is one of the two（2）Fabric Interconnects
    • C、A group is a set off our（4）nodes
    • D、Each group is identified by a floating node ID

    正确答案:B

  • 第14题：

    In Multicast VPN （MVPN） implementations， which two of the following statements are regarding the DefaultMDT Group？（）

    • A、It is used for PIM control traffic
    • B、It is optionally configured for a high bandwidth multicast source to reduce multicast traffic replication to uninterested PE routers
    • C、Within the VPF configuration in the PE router， multiple Default MDT groups are configured so each VPF can support multiple multicast sources
    • D、There is a reduced multicast state in the MPLS core P routers
    • E、When multicast traffic exceeds a certain configured threshold， traffic from the Data MDT is switched to the Default MDT to conserve bandwidth

    正确答案:A,D

  • 第15题：

    Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core？ （）

    • A、 virtualization
    • B、 unified I/O
    • C、 support for 48-port Gb/s line card
    • D、 support for Data Center Service Modules
    • E、 high performance
    • F、 high availability

    正确答案:B,E,F

  • 第16题：

    Which three of the following are valid CRS deployment scenarios? （）

    • A、High Availability CRS Engines running on hardware from different server classes 
    • B、High Availability CRS Engines running on similar hardware from the same server class but from different vendors 
    • C、High Availability CRS Engines and database and a simplex Recording Server 
    • D、High Availability CRS Engines and four simplex VoIP Monitoring Servers 
    • E、CCM co-resident deployment on an MCS 7815

    正确答案:B,D,E

  • 第17题：

    A storage specialist is discussing the customer’s high availability plan and discovers that they areonly 80 kilometers （50 miles） from the intended site. They require 7 x 24 x 365 data availability in aUNIX environment with an RPO of two minutes. They have two DS5300 systems located at bothsites. Which of the following IBM storage functions best meets the customer’s businesscontinuance requirements？（）

    • A、HACMP
    • B、Volume copy
    • C、Metro Mirror
    • D、Global Mirror

    正确答案:C

  • 第18题：

    Which item is the most important factor during deployment of high-availability features？（）

    • A、Test major changes before deployment and defer minor changes until during deployment. 
    • B、Document and verify rollback procedures.
    • C、Ensure consistency of code versions across the network.
    • D、Progressively modify procedures and documentation during implementation.

    正确答案:B

  • 第19题：

    Which of the following BEST describes a benefit of RAID 0?（）

    • A、High fault tolerance
    • B、Ease of failure recovery
    • C、High performance
    • D、No configuration

    正确答案:C

  • 第20题：

    多选题
    To troubleshoot interface problems, you can use both the disable command and the deactivate command. Which two statements are correct?（）
    A

    If the interface is disabled, the logical unit will administratively shutdown.

    B

    If the interface is deactivated, the physical interface will administratively shutdown.

    C

    If the interface is deactivated, the interface configuration is ignored during commit.

    D

    If the interface is disabled, the logical unit configuration is ignored during commit.


    正确答案： B,C
    解析： 暂无解析

  • 第21题：

    多选题
    Which three of the following network features are methods used to achieve high availability（）
    A

    Spanning Tree Protocol（STP）

    B

    Delay reduction

    C

    Hot Standby Routing Protocol（HSRP）

    D

    Dynamic routing protocols

    E

    Quality of Service（QoS）

    F

    Jitter management


    正确答案： A,C,D
    解析： 暂无解析

  • 第22题：

    多选题
    You have just purchased a new Cisco 3560 switch running the enhanced IOS and need configure  it to be installed in a high availability network. On a 3560 EMI switch，  which three types of  interfaces can be used to configure HSRP？（）
    A

    SVI interface

    B

    Access port

    C

    EtherChannel port channel

    D

    Loopback interface

    E

    Routed port

    F

    BVI interface


    正确答案： B,F
    解析： 暂无解析

  • 第23题：

    单选题
    You want to implement a high availability network using two Cisco routers. You also want to  ensure that the stat of the WAN interfaces can be tracked in doing so.  Which router redundancy  protocol cannot be configured for interface tracking？ （）
    A

     GLBP

    B

     HSRP

    C

     RPR

    D

     VRRP

    E

     SLB

    F

     RPR+

    G

     None of the other alternatives apply


    正确答案： C
    解析： 暂无解析

相关内容