itgle.com

Which remote access VPN addressing technique supports a static IP address to support a specific application？（）A、 Use a static ip addresses based on incoming user policies.B、 Use DHCP to assign addresses based on incoming user policies.C、 Deploy a clientle

题目

Which remote access VPN addressing technique supports a static IP address to support a specific application？（）

  • A、 Use a static ip addresses based on incoming user policies.
  • B、 Use DHCP to assign addresses based on incoming user policies.
  • C、 Deploy a clientless model to assign a unique address to the user.
  • D、 Deploy RADIUS or LDAP to assign the address to the user.
相似考题

1.Which JUNOS software feature allows a user to define specific next－hop values for IP packets based on the source IP address of that packet?()A. MPLSB. Load BalancingC. Class Based ForwardingD. Filter Based Forwarding

2.In a base e－Commerce module design, which routing statement is correct?()A. Routing is mostly static.B. Hardcoded IP addresses are used to support failover.C. Inbound servers use the CSM or ACE as the default gateway.D. VLANs between the access layer switches are used for FHRP protocols.

3.Which remote access VPN addressing technique supports a static IP address to support a specific application?()A. Use a staticip addresses based on incoming user policies.B. Use DHCP to assign addresses based on incoming user policies.C. Deploy a clientless model to assign a unique address to the user.D. Deploy RADIUS or LDAP to assign the address to the user.

4.Most IP layer-based proxy mechanisms, such as network address translation(NAT), only support uni-directional proxy, from the internal network to external network(the Internet). The proxy establishes the communication channel by(66)IP addresses. The IP addresses must be(67). These proxy mechanisms prevent applications that must establish return data channels from establishing their data channels, such as, multimedia applications. IP layer-based proxy mechanisms need additional software(68)for each application that uses(69)channels. SOCKS identifies communication targets through domain names, overcoming the restriction of using private IP addresses. SOCKS can use domain names to establish communication between separate LANs, with(70)IP addresses.A．manufacturingB．manipulatingC．conductD．implement

更多“Which remote access VPN addressing technique supports a static IP address to support a specific application？（）A、 Use a static ip addresses based on incoming user policies.B、 Use DHCP to assign addresses based on incoming user policies.C、 Deploy a clientle”相关问题

  • 第1题：

    Static VLANs are being used on the Company network. What is true about static VLANs？（）

    • A、Devices use DHCP to request their VLAN.
    • B、Attached devices are unaware of any VLANs.
    • C、Devices are assigned to VLANs based on their MAC addresses.
    • D、Devices are in the same VLAN regardless of which port they attach to.

    正确答案:B

  • 第2题：

    Which remote access VPN addressing technique supports a static IP address to support a specific application?（）

    • A、Use a staticip addresses based on incoming user policies.
    • B、Use DHCP to assign addresses based on incoming user policies.
    • C、Deploy a clientless model to assign a unique address to the user.
    • D、Deploy RADIUS or LDAP to assign the address to the user.

    正确答案:D

  • 第3题：

    Which two statements are true about overflow pools？（）

    • A、Overflow pools do not support PAT
    • B、Overflow pools can not use the egress interface IP address for NAT
    • C、Overflow pools must use PAT
    • D、Overflow pools can contain the egress interface IP address or separate IP addresses

    正确答案:C,D

  • 第4题：

    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）

    • A、Use a static IPv4 address in the range used at the branch office.
    • B、Use an alternate configureation that contains a static IP address in the range used at the main office
    • C、Use the address that was assigned by DHCP as a static IP address
    • D、Use an alternate configuration that contains a static Ip address in the range used at the branch office.

    正确答案:D

  • 第5题：

    In a base e-Commerce module design, which routing statement is correct?（）

    • A、Routing is mostly static.
    • B、Hardcoded IP addresses are used to support failover.
    • C、Inbound servers use the CSM or ACE as the default gateway.
    • D、VLANs between the access layer switches are used for FHRP protocols.

    正确答案:A

  • 第6题：

    Which of the following is MOST likely causing a client’s computer to have an IP address of169.254.0.10?（）

    • A、The office is using a public IP scheme.
    • B、The client is set to a static IP address.
    • C、The DHCP server is out of addresses.
    • D、The firewall on the PC is down.

    正确答案:C

  • 第7题：

    How is DHCP enabled on a server？（）

    • A、Use network options to enable ipforwarding
    • B、Edit /etc/rc.tcpip and enable dhcpsd
    • C、Edit /etc/rc.nfs increase the number of biod daemons
    • D、Use SMIT to set the server to use DHCP instead of static IP addresses

    正确答案:B

  • 第8题：

    You are designing the IP address assignment strategy for the VPN users. Which two actions should you perform.（）

    • A、 Configure VPN1 as a DHCP Relay Agent.
    • B、 Configure VPN1 to assign IP Address by using DHCP server.
    • C、 Configure VPN1 to have a static pool of IP Address from the network address of 131.107.1.0/24.
    • D、 Configure VPN1 to have a static pool of IP Address from the network address of 192.168.1.0/24.
    • E、 Configure the perimeter firewall to allow inbound DHCP traffic to be passed to VPN1.
    • F、 Configure the interval firewall to allow DHCP broadcasts to be forwarded from the external network to the internal network.

    正确答案:A,B

  • 第9题：

    单选题
    Which remote access VPN addressing technique supports a static IP address to support a specific application？（）
    A

     Use a static ip addresses based on incoming user policies.

    B

     Use DHCP to assign addresses based on incoming user policies.

    C

     Deploy a clientless model to assign a unique address to the user.

    D

     Deploy RADIUS or LDAP to assign the address to the user.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet. You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）
    A

    Use a static IPv4 address in the range used at the branch office.

    B

    Use an alternate configureation that contains a static IP address in the range used at the main office

    C

    Use the address that was assigned by DHCP as a static IP address

    D

    Use an alternate configuration that contains a static Ip address in the range used at the branch office.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    Which statement is true about interface-based static NAT? （）
    A

    It also supports PAT.

    B

    It requires you to configure address entries in the junos-nat zone.

    C

    It requires you to configure address entries in the junos-global zone.

    D

    The IP addresses being translated must be in the same subnet as the incoming interface.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which remote access VPN addressing technique supports a static IP address to support a specific application?（）
    A

    Use a staticip addresses based on incoming user policies.

    B

    Use DHCP to assign addresses based on incoming user policies.

    C

    Deploy a clientless model to assign a unique address to the user.

    D

    Deploy RADIUS or LDAP to assign the address to the user.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    What is the result of entering the command port-channel load-balance src-dst-ip on an EtherChannel link？ （）

    • A、Packets are distributed across the ports in the channel based on both the source and destination MAC addresses.
    • B、Packets are distributed across the ports in the channel based on both the source and destination IP addresses.
    • C、Packets are balanced across the ports in the channel based first on the source MAC address， then on the destination MAC address， then on the IP address.
    • D、Packets are distributed across the access ports in the channel based first on the source IP address and then the destination IP addresses.

    正确答案:B

  • 第14题：

    Which JUNOS software feature allows a user to define specific next-hop values for IP packets based on the source IP address of that packet？（）

    • A、MPLS
    • B、Load Balancing
    • C、Class Based Forwarding
    • D、Filter Based Forwarding

    正确答案:D

  • 第15题：

    A system administrator wants to configure 802.1X on an Ethernet switch to enable access to specific parts of the network based on group memberships.How can the administrator accomplish this goal?（）

    • A、Configure roles based on departments and assign access based on source IP address.
    • B、Configure roles based on the user's manager and assign access based on the user's MAC address
    • C、Configure roles based on group memberships and assign a specific VLAN to the role.
    • D、Configure roles based on RADIUS request attribute and assign a specific VLAN to the role.

    正确答案:C

  • 第16题：

    In a configuration with redundant supervisors， how many IP addresses are required to configure full remote access via management 0？（）     

    • A、 two IP addresses， one for each supervisor
    • B、 three IP addresses， one virtual IP and one physical IP for each supervisor
    • C、 one IP address that is shared among supervisors
    • D、 none—management 0 will use the IP address from the first SVI that is created

    正确答案:C

  • 第17题：

    Which of the following types of NAT allows multiple private internal IP addresses to use a singlepublic external IP address？（）

    • A、NAT mapping
    • B、NAT overloading
    • C、NAT caching
    • D、Static NAT
    • E、Dynamic NAT
    • F、Overlapping NAT

    正确答案:B

  • 第18题：

    An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）

    • A、Use SMIT to have the server use DHCP instead of a static address
    • B、Edit /etc/rc.tcpip and start the dhcpsd daemon
    • C、Use the network options command to enable ipforwarding
    • D、Edit /etc/rc.net to set network options back to default

    正确答案:B

  • 第19题：

    Which statement is true about interface-based static NAT? （）

    • A、It also supports PAT.
    • B、It requires you to configure address entries in the junos-nat zone.
    • C、It requires you to configure address entries in the junos-global zone.
    • D、The IP addresses being translated must be in the same subnet as the incoming interface.

    正确答案:D

  • 第20题：

    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.You need to ensure that the portable computers can connect to network resources at the main office and the branch office. How should you configure each portable computer？（）

    • A、Use a static IPv4 address in the range used at the branch office.
    • B、Use an alternate configuration that contains a static IP address in the range used at the main office.
    • C、Use the address that was assigned by the DHCP server as a static IP address.
    • D、Use an alternate configuration that contains a static IP address in the range used at the branch office.

    正确答案:D

  • 第21题：

    单选题
    Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.  You need to ensure that the portable computers can connect to network resources at the main office and the branch office.How should you configure each portable computer（）？
    A

    Use a static IPv4 address in the range used at the branch office.

    B

    Use an alternate configuration that contains a static IP address in the range used at the main office.

    C

    Use the address that was assigned by the DHCP server as a static IP address.

    D

    Use an alternate configuration that contains a static IP address in the range used at the branch office.


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）
    A

    Use SMIT to have the server use DHCP instead of a static address

    B

    Edit /etc/rc.tcpip and start the dhcpsd daemon

    C

    Use the network options command to enable ipforwarding

    D

    Edit /etc/rc.net to set network options back to default


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    In a configuration with redundant supervisors， how many IP addresses are required to configure full remote access via management 0？（）
    A

     two IP addresses， one for each supervisor

    B

     three IP addresses， one virtual IP and one physical IP for each supervisor

    C

     one IP address that is shared among supervisors

    D

     none—management 0 will use the IP address from the first SVI that is created


    正确答案： A
    解析： 暂无解析

相关内容