itgle.com

A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1

题目

A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）

  • A、4
  • B、3
  • C、2
  • D、8
相似考题

1.A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）A. operator trainingB. cache size of the two clustersC. fibre bandwidth capability between the sitesD. number of stacked tape drives attached to each cluster

2.A medical customer has a rack with four BladeCenter H chassis that have been operating normally for several months. After installing a new rack of servers in the data center, the system administrator notices the blowers in the BladeCenters have increased their speed. Which of the following caused this problem? （）A、The room temperature has reached 23C (73.4F). B、A Blade within the chassis has been shut down. C、The ambient temperature in the data center has increased D、One of the additional System X servers in the BladeCenter rack has failed.

3.A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades， six HX5 blades with MAX5， one 1U external Fibre Channel switch， and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which is the minimum amount of rack space required to implement the solution of the following？（）A、32UB、21UC、25UD、22U

4. A customer wants to implement the following Blades in BladeCenter H:Two POWER Blades running IBM i partitions.Two POWER Blades running AIX and LinuxFour x86 Blades running Windows. Which of the following design consideration statements is correct?（）A、The Blades must use the same CIOv and CFFh expansion adapter types.B、Two physical BladeCenter H chassis will be required. One for the POWER Blades, the other for the x86 Blades.C、The x86 Blades and POWER Blades may use different expansion adapters provided the POWER Blades are in bays 1-7 and the x86 Blades are in slots 8-14.D、The x86 Blades and POWER Blades may use different expansion adapters, provided the corresponding I/O modules to Blade midplane connections are configured in the Advanced Management Module (AMM).

参考答案和解析
正确答案:A
更多“A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）”相关问题

  • 第1题：

    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. The customer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy？（）

    • A、6
    • B、8
    • C、10
    • D、12

    正确答案:C

  • 第2题：

    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. Theustomer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy? （）

    • A、12 
    • B、10 
    • C、8 
    • D、6

    正确答案:B

  • 第3题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）

    • A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
    • B、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch
    • C、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第4题：

    A customer needs to add three JS22 blade servers. The customer currently has three HS21 Blade servers and one LS41 4-socket Blade Server. Based upon this information，  what additional items does the customer need to purchase？ （）

    • A、An IBM BladeCenter H chassis for the JS22 Blade servers
    • B、A concurrent KVM daughter card
    • C、A pair of IBM BladeCenter Power Supplies
    • D、A second Management Module

    正确答案:C

  • 第5题：

    A customer has purchased an IBM BladeCenter H chassis and needs the following servers：  --Two HS21 blade servers each with 8GB memory and 2 drives   --Two HS21 blade servers each with 24GB memory and 2 drives   --Two LS21 blade servers each with 2GB memory and 2 Hot-Swap SCSI drives   How many total server bays will be required for this configuration？（）

    • A、6
    • B、8
    • C、10
    • D、12

    正确答案:C

  • 第6题：

    A banking customer plans to implement a BladeCenter H chassis. They plan for seven HS22 blades, six HX5 blades with MAX5, one 1U external Fibre Channel switch, and two 3U Fibre Channel storage devices with fourteen 146GB drives. Which of the following is the minimum amount of rack space required to implement the solution?（）

    • A、32U 
    • B、25U 
    • C、22U 
    • D、21U

    正确答案:B

  • 第7题：

    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）

    • A、Two additional power supplies
    • B、Fibre Channel （FC） switches and SAN storage
    • C、A Nortel 1/10 GB ESM
    • D、SSD for the HX5

    正确答案:A

  • 第8题：

    A media customer has an IBM BladeCenter E with ten HS22 Blade server installed. Currently only one Ethernet port is available for each server. What is required to enable the second port on eachserver？（）

    • A、Fiber Channel Switch Module
    • B、Gb Ethernet expansion card
    • C、Myrinet Cluster expansion card
    • D、Ethernet Switch Module

    正确答案:D

  • 第9题：

    单选题
    A customer needs to add three JS22 blade servers. The customer currently has three HS21 Blade servers and one LS41 4-socket Blade Server. Based upon this information，  what additional items does the customer need to purchase？ （）
    A

    An IBM BladeCenter H chassis for the JS22 Blade servers

    B

    A concurrent KVM daughter card

    C

    A pair of IBM BladeCenter Power Supplies

    D

    A second Management Module


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）
    A

    Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules

    B

    Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules

    C

    Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules

    D

    Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）
    A

    4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 

    B

    Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 

    C

    Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 

    D

    Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）
    A

    Fibre Channel Expansion Card for each Blade Server

    B

    cKVM Card for each Blade Server

    C

    iSCSI Expansion Card for each Blade Server

    D

    4Gb Modular Flash Drive


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）

    • A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 
    • B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 
    • C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 
    • D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

    正确答案:C

  • 第14题：

    A manufacturing customer has liminted space remaining in their data center and is concerned about rising power costs. The customer applications require very large amounts of memory. They want server redundancy and no downtime. Which of the following architectural features should be discussed with them？（）

    • A、iDataPlex with vSphere
    • B、Four x3550 M3 servers，vSphere and racks
    • C、BladeCenter， HX5 blades and vSphere
    • D、One x3950 X5 servers andvSphere

    正确答案:C

  • 第15题：

    A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）

    • A、operator training
    • B、cache size of the two clusters
    • C、fibre bandwidth capability between the sites
    • D、number of stacked tape drives attached to each cluster

    正确答案:C

  • 第16题：

    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）

    • A、Fibre Channel Expansion Card for each Blade Server
    • B、cKVM Card for each Blade Server
    • C、iSCSI Expansion Card for each Blade Server
    • D、4Gb Modular Flash Drive

    正确答案:C

  • 第17题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第18题：

    A banking customer has the following requirements for an IBM BladeCenter solution with high speed fibre channel： （1）four 4-socket Microsoft SQL servers with two hot swap SAS drives  （2）two physical Microsoft Active Directory Servers  （3）twenty-two physical Citrix servers  （4）three physical Web servers （5）one physical vCenter server   （6）eight vSphere hosts  Which configuration minimally satisfies these requirements？（）

    • A、Three IBMBladeCenter S chassis， three Brocade Fibre modules， six Ethernet modules
    • B、Three IBMBladeCenter E chassis， three Brocade Fibre modules， six Ethernet modules
    • C、Four IBMBladeCenter H chassis， four QLogic Fibre Channel modules， eight Ethernet modules
    • D、Three IBMBladeCenter H chassis， three QLogic Fibre Channel modules， six Ethernet modules

    正确答案:D

  • 第19题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the internal fibre switches. Consequently. the customer wants to use the Optical Pass-Thru Module （OPM）.  What TRUE statement should be mentioned to the customer regarding the OPM？（）

    • A、You can not put the Optical Pass-Thru Module in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch.
    • B、Using blade servers with the Optical Pass-Thru Module will require more fibre ports on the external fibre switch.
    • C、The Optical Pass-Thru Module does not provide the customer with an opportunity to reuse their fibre switch.
    • D、The blade servers do not work with the Optical Pass-Thru Module.

    正确答案:B

  • 第20题：

    A customer has a BladeCenter E installed and plans to migrate their current Blades to the BladeCenter H.  What options will migrate from the BladeCenter E to the BladeCenter H chassis？ （）

    • A、SAN Switch modules
    • B、Blowers
    • C、Power supplies
    • D、Battery backup units

    正确答案:A

  • 第21题：

    单选题
    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）
    A

    Two additional power supplies

    B

    Fibre Channel （FC） switches and SAN storage

    C

    A Nortel 1/10 GB ESM

    D

    SSD for the HX5


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A customer has a BladeCenter H chassis with a single AMM.  The AMM is defective. Which of the following is the method to backup the existing AMM so the new AMM automaticlally picks up the configuration? （）
    A

    Back up the AMM configuration to a file 

    B

    Back up the AMM configuration to the chassis 

    C

    Back up the AMM using IBM Systems Director 

    D

    Back up the AMM using Tivoli Storage Manager


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. Theustomer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy? （）
    A

    12 

    B

    10 

    C

    8 

    D

    6


    正确答案： D
    解析： 暂无解析

相关内容