A second optical drive has been added to the computer and needs to be referenced as the R: drive by the Microsoft Windows operating system. Which of the following places in Microsoft Windows will BEST accomplish this task?（）A、Administrative ToolsB、Disk M

第1题：

You configure the hard disk on each computer to have two 4-GB partitions. Windows NT  Workstation is installed on driver C.  Windows 2000 Professional is installed on drive D.   In Windows 2000 Professional, you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation. You notice that users can still save files to drive D.   You want t prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.   What should you do on each computer?（）

• A、Use Windows 2000 Professional to configure drive D as a dynamic partition
• B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
• C、Use Windows NT Workstation to configure NTFS permissions on drive D to deny the users write permission
• D、Reinstall Windows NT Workstation after configuring the disk quotas

第2题：

Which of the following Microsoft encryption software provides the HIGHEST level of security for PCs running Windows Vista Enterprise or Ultimate Vista?（）

• A、NTFS
• B、Windows Defender for Vista
• C、BitLocker drive encryption
• D、EFS

第3题：

A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

• A、Add another hard drive and use that available space.
• B、Run FDISK.
• C、Use the Disk Management tool.
• D、Back up all important data to an external drive then reformat the hard drive.

第4题：

A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）

• A、Reformat the NTFS partition.
• B、Recreate the partition that was deleted.
• C、Rewrite the MBR.
• D、Run a check disk on the drive

第5题：

An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

• A、Move the page file to the new drive.
• B、Copy the system32 directory to the new drive.
• C、Convert the C drive to a basic disk.
• D、Setup a software RAID to mirror the C drive.

第6题：

A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）

• A、The drive jumper settings are incorrect.
• B、The drive is not receiving power from PSU.
• C、Windows only supports one optical drive.
• D、The user connected the drive with a SATA cable.

第7题：

Which of the following utilities will a technician use to determine how many partitions a hard drive has?（）

• A、Administrator Tools
• B、Disk Management
• C、Device Manager
• D、Computer Management

第8题：

You are the desktop administrator for your company. You install Windows XP Professional on a new portable computer that will be used by one of the company's software developers. You test the computer after you complete the installation and find out that the computer functions properly. The computer contains a 6-GB hard disk and a removable 4-GB hard disk. The 6-GB hard disk is configured as drive C, and the removable hard disk is configured as drive D. You install Windows 98 on drive D and deliver the computer to the software developer. The software developer reports that the computer does not start when drive D is not connected. Instead, the computer briefly displays an operating system menu, and then it displays an error message stating that an operating system could not be found. When drive D is connected, the computer starts Windows 98. You need to configure the computer so that it starts Windows XP Professional whether or not drive D is connected. What should you do?（）

• A、Modify the computer's BIOS so that it automatically detects whether drive D is connected.
• B、Modify the computer's BIOS so that drive C is first in the computer's boot order. 
• C、Modify the Boot.ini file on the computer by changing the default= entry to the following value: multi(0)disk(0)rdisk(0)partition(1)="Microsoft Windows XP Professional" /fastdetect.
• D、Modify the Boot.ini file on the computer by changing the entry for Windows 98 to the following value: D: "Microsoft Windows 98" /fastdetect.

第9题：

You are configuring five computers for Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has an 8 GB hard disk. You configure the hard disk on each computer to have two 4 GB partitions.  Windows NT Workstation is installed on drive C and Windows 2000 Professional on drive D. In Windows 2000 Professional， you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart your computer and load Windows NT Workstation. You notice that users can save files to drive D.  You want to prevent users from saving the files to drive D in either operating system. You also want to ensure that users can access both drives while using either operating system.  What should you do？（）

• A、Use Windows 2000 Professional to configure drive D as a dynamic partition
• B、Use Windows 2000 Professional to enable encrypting file system on drive D
• C、Use Windows NT workstation to configure NTFS permissions on drive D to deny the users  write permission
• D、Reinstall Windows NT Workstation after configuring disk quotas

第10题：

You are the administrator of a Windows 2000 network. You are configuring eight computers to use both Windows NT Workstation 4.0 and Windows 2000 Professional. Each computer has a 10 GB hard disk. You configure the hard disk on each computer to have two 5 GB partitions. Windows NT Workstation is installed on drive D. Windows 2000 Professional is installed on drive C. In Windows 2000 Professional, you configure a disk quota on drive C to prevent users from saving work files on the disk. You restart the computers and load Windows NT Workstation 4.0. You notice that users can still save files to drive C. You want to prevent users from saving files to drive C in either operating system. You also want to ensure that users can access both drives while using either operating system. What should you do on each computer? （）

• A、Reinstall Windows NT Workstation 4.0 after configuring the disk quotas
• B、Use Windows 2000 Professional to configure drive C as a dynamic partition
• C、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive C
• D、Use Windows NT Workstation 4.0 to configure NTFS permissions on drive C to deny the usersWrite permission

第11题：

第12题：

第13题：

A customer reports the optical drive is no longer responding. Which of the following questionsshould be asked FIRST?（）

• A、“Did you log in with an administrator account?”
• B、“Have you been to any inappropriate websites?”
• C、“What have you changed since the optical drive worked properly?”
• D、“What has changed since the optical drive worked properly?”

第14题：

A technician notices that there is a second partition on the primary hard drive. This partitionis notassigned a drive letter and is not accessible from Windows. Which of the following is the MOST likely explanation for this extra partition?（）

• A、Space reserved by the drive manufacturer for firmware.
• B、Space set aside by Windows for use by the virtual memory swap file.
• C、A potentially dangerous virus has been downloaded onto the system.
• D、A recovery partition put there by the manufacturer.

第15题：

A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）

• A、The motherboard was damaged and needs replacing.
• B、The floppy drive was not reconnected.
• C、A configuration disk was left in the floppy drive.
• D、The ribbon cable has been installed incorrectly.

第16题：

A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

• A、Disk Management
• B、Services and Applications
• C、Removable Storage
• D、Device Manager

第17题：

A new array of hard drives has been added to an existing server； however， when the server is booted into the Windows OS the new drives fail to appear in My Computer.  From which of the following locations can the new storage drives be added？（）

• A、 Format command
• B、 Hypervisor
• C、 Computer Management
• D、 Disk Management
• E、 Virtual Center

第18题：

An end user reports that their computer is making noise constantly. The technician notes that the hard drive activity light is on frequently. The technician finds plenty of free space on the drive.Which of the following BEST explains why the drive light is continuously active?（）

• A、The system has a fragmented hard drive.
• B、The drive interface needs to be changed.
• C、The user has too many documents on the hard drive.
• D、The system page file has an issue.

第19题：

An administrator has replaced a faulty drive in a server using software RAID. The drive needs to now be partitioned before being added back to the array. Which of the following tools should the administrator use to accomplish this？（）

• A、chkdsk
• B、mount
• C、fsck
• D、diskpart

第20题：

You are configuring 5 computers to use both Windows NT workstation 4.0 and Windows 2000 Professional. Each computer has an 8GB hard disk. You configure that hard disk on each computer to have two 4GB partitions. Windows NT workstation is installed on drive C. Windows 2000 Professional is installed on drive D.  In Windows 2000 Professional you configure a disk quota on drive D to prevent users from saving work files on the disk. You restart the computer and load Windows NT workstation. You notice that users can still save files to drive D. You want to prevent users from saving files to drive D in either operating system. You also want to ensure that users can access both drives using either operating system.  What should you do on each computer? （）

• A、Use Windows 2000 Professional to configure drive D as a dynamic volume
• B、Use Windows 2000 Professional to enable Encrypting File System （EFS） on drive D
• C、Use Windows NT workstation to configure NTFS permission on drive D to deny the users write  permission
• D、Reinstall Windows NT workstation after configuring the disk code task

第21题：

You are a network administrator for ExamSheet.net's Windows 2000 network.  A user named Sandra has a Windows 2000 Professional computer with a single hard disk with two partitions configured as drive C and D. A pagefile has been configured on Drive C:. Sandra reports that applications on her Windows 2000 Professional computer are running slowly. You notice that Sandra's computer has 64 MB of RAM. Her hard drive contains 70 MB of free disk space on drive C and 160 MB of free disk space on drive D.You want to improve the performance of Sandra's computer.  What should you do?（）

• A、Move the paging file to drive D
• B、Use Disk Cleanup to delete temporary files and unnecessary program files
• C、Perform a disk analysis， and use the disk defragmenter if recommended
• D、Ensure that the Performance Options window is optimized for applications
• E、Ensure that the Performance Options services.

第22题：

第23题：