itgle.com

A new floppy drive was just installed into a PC. The drive powers on at system boot but the status LED does not turn off during operation. Which of the following is MOST likely the issue?（）A、The power cable was installed incorrectly and needs to be flippe

题目

A new floppy drive was just installed into a PC. The drive powers on at system boot but the status LED does not turn off during operation. Which of the following is MOST likely the issue?（）

  • A、The power cable was installed incorrectly and needs to be flipped.
  • B、The floppy drive was not enabled within the motherboard’s BIOS.
  • C、The FDD cable was installed incorrectly and needs to be flipped.
  • D、A Molex power cable was used instead of a Berg cable.
相似考题

1.A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?()A. It is a feature of new floppy drives.B. The data cable was put on backwards.C. A disk is being read by the floppy drive.D. The new floppy drive is defective.

2.系统按照什么样的方式启动当它里面有一张有特殊作用的软盘时()。A.Hard drive CD-ROM FloppyB.Floppy，HarddriveC.CD-ROM，Floppy，HarddriveD.Floppy，CD-ROM，Harddrive

3.Do you know where I can repair my motorcar? （）AI have just bought a new one.BIt‘s cheap to repair a motorcar.CAround the street comer.DYou drive too fast to damage it.

4."POST errors in the 600－799 range generally indicate Floppy disk drive errors."A．错误B．正确

参考答案和解析
正确答案:C
更多“A new floppy drive was just inst”相关问题

  • 第1题：

    Do you know where I can repair my motorcar? （）

    • A、I have just bought a new one.
    • B、It‘s cheap to repair a motorcar.
    • C、Around the street comer.
    • D、You drive too fast to damage it.

    正确答案:C

  • 第2题：

    系统按照什么样的方式启动当它里面有一张有特殊作用的软盘时（）。

    • A、Hard drive CD-ROM Floppy
    • B、Floppy，Harddrive
    • C、CD-ROM，Floppy，Harddrive
    • D、Floppy，CD-ROM，Harddrive

    正确答案:A

  • 第3题：

    A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）

    • A、It is a feature of new floppy drives.
    • B、The data cable was put on backwards.
    • C、A disk is being read by the floppy drive.
    • D、The new floppy drive is defective.

    正确答案:B

  • 第4题：

    A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）

    • A、The motherboard was damaged and needs replacing.
    • B、The floppy drive was not reconnected.
    • C、A configuration disk was left in the floppy drive.
    • D、The ribbon cable has been installed incorrectly.

    正确答案:D

  • 第5题：

    "POST errors in the 600-699 range generally indicate Floppy disk drive errors.


    正确答案:正确

  • 第6题：

    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）

    • A、The power supply has failed.
    • B、The drive cable is connected backwards.
    • C、The floppy drive has failed.
    • D、The proper drivers have not been loaded.

    正确答案:B

  • 第7题：

    Companycom has just added some new disk drives to a p5 590. The customer needs to know the largest Logical Track Group that these drives will support. What is the best way to locate this information?（）

    • A、Use lquerypv to read the drive
    • B、Use lspv and look at PP Size value
    • C、Look on the outside of the drive itself
    • D、Use bootinfo to find the LTG on the drive

    正确答案:A

  • 第8题：

    单选题
    A new floppy drive was just installed into a PC. The drive powers on at system boot but the status LED does not turn off during operation. Which of the following is MOST likely the issue?（）
    A

    The power cable was installed incorrectly and needs to be flipped.

    B

    The floppy drive was not enabled within the motherboard’s BIOS.

    C

    The FDD cable was installed incorrectly and needs to be flipped.

    D

    A Molex power cable was used instead of a Berg cable.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）
    A

    There is a non-bootable CD in the CD-ROM drive.

    B

    There is a non-bootable DVD in the DVD-ROM drive.

    C

    There is a non-bootable Blu-Ray in the Blu-Ray drive.

    D

    There is a non-bootable floppy in the floppy drive.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）
    A

    Use a jumper from the motherboard where the new drive is going to be installed.

    B

    Use a jumper from a hard drive that is no longer functioning.

    C

    Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.

    D

    The new hard drive must be replaced


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A floppy drive is replaced in a computer and now when the computer is turned on the floppy drive light is constantly lit. Which of the following is the MOST likely cause?（）
    A

    The power supply has failed.

    B

    The drive cable is connected backwards.

    C

    The floppy drive has failed.

    D

    The proper drivers have not been loaded.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    You have some compressed bitmap files in a directory of your Windows 2000 Professional computer. The file compression has reduced their size from 2 MB to 1 MB. You attempt to copy them to a floppy disk, but an error reports that the destination drive is full.  How can you copy the bitmap files to a 1.44 MB floppy disk? （）
    A

    Use a third-party file compression utility to create a compressed archive containing the bitmap files. Copy the compressed archive to the floppy disk.

    B

    Create an empty compressed folder on the floppy disk， and copy the files to the new folder.

    C

    Format the floppy disk as NTFS， and restart the copy operation.

    D

    Confirm that the cluster size on the NTFS volume is greater than 32k.


    正确答案： D
    解析： You should compress the files with the help of a third-party file compression utility.

  • 第13题：

    A technician has lost a necessary jumper for a new hard drive that must be installed immediately.Which of the following is the BEST solution?（）

    • A、Use a jumper from the motherboard where the new drive is going to be installed.
    • B、Use a jumper from a hard drive that is no longer functioning.
    • C、Contact the manufacturer of the new hard drive and have a replacement jumper shipped immediately.
    • D、The new hard drive must be replaced

    正确答案:B

  • 第14题：

    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

    • A、 backup the BIOS configuration to use later
    • B、 install the BIOS update from a command prompt
    • C、 create a bootable floppy and copy the BIOS update tools to the floppy
    • D、 read the manufacturer’s guidelines and recommendations on installing the update

    正确答案:D

  • 第15题：

    A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）

    • A、The floppy drive
    • B、The hard drive
    • C、The CD-ROM drive
    • D、The DVD-ROM drive

    正确答案:A

  • 第16题：

    After POST, the error message ‘Invalid system disk. Replace and press any key’ appears. Which of the following is MOST likely the cause?（）

    • A、There is a non-bootable CD in the CD-ROM drive.
    • B、There is a non-bootable DVD in the DVD-ROM drive.
    • C、There is a non-bootable Blu-Ray in the Blu-Ray drive.
    • D、There is a non-bootable floppy in the floppy drive.

    正确答案:D

  • 第17题：

    An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

    • A、Move the page file to the new drive.
    • B、Copy the system32 directory to the new drive.
    • C、Convert the C drive to a basic disk.
    • D、Setup a software RAID to mirror the C drive.

    正确答案:A

  • 第18题：

    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

    • A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
    • B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
    • C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
    • D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

    正确答案:D

  • 第19题：

    单选题
    A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on， the drive LED remains lit and an error message during power-on self test （POST） states， ’No Drive Present.’ Which of the following would MOST likely be the cause？（）
    A

    The motherboard was damaged and needs replacing.

    B

    The floppy drive was not reconnected.

    C

    A configuration disk was left in the floppy drive.

    D

    The ribbon cable has been installed incorrectly.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    判断题
    "POST errors in the 600-799 range generally indicate Floppy disk drive errors."
    A

    对

    B

    错


    正确答案： 错
    解析： 暂无解析

  • 第21题：

    单选题
    A user is trying to boot a desktop PC from their A: drive. Which of the following devices is the userdescribing？（）
    A

    The floppy drive

    B

    The hard drive

    C

    The CD-ROM drive

    D

    The DVD-ROM drive


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）
    A

     backup the BIOS configuration to use later

    B

     install the BIOS update from a command prompt

    C

     create a bootable floppy and copy the BIOS update tools to the floppy

    D

     read the manufacturer’s guidelines and recommendations on installing the update


    正确答案： B
    解析： 暂无解析

  • 第23题：

    单选题
    A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?（）
    A

    It is a feature of new floppy drives.

    B

    The data cable was put on backwards.

    C

    A disk is being read by the floppy drive.

    D

    The new floppy drive is defective.


    正确答案： A
    解析： 暂无解析

相关内容