An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the adm

第1题：

第2题：

An administrator has just installed a new NIC into the server. The system POSTs fine and the NIC is recognized by the OS, but it does not receive an IP address. Which of the following is the MOST likely cause of this?（）

• A、The NIC is not on the HCL.
• B、The driver is incorrect on the server.
• C、The patch cable has not been seated properly.
• D、The NIC is not seated properly.

第3题：

The administrator has just installed a new memory module into the server. Now， the server is not showing the new memory. Which of the following should the administrator perform FIRST？（）

• A、System reboot
• B、Reseat the memory
• C、Install the latest firmware
• D、Install the latest driver

第4题：

The server administrator has just brought a new Windows server online. Permissions are set， but the server administrator cannot connect remotely. Which of the following is MOST likely the problem？（）

• A、WMI was not enabled.
• B、Server service was not enabled.
• C、RDP was not enabled.
• D、Workstation service was not enabled.

第5题：

A System p administrator has just configured logging system messages with the syslogd daemon.  At boot time which file starts the syslog daemon（）

• A、/etc/rc.tcpip
• B、/sbin/rc.boot
• C、/etc/rc.net
• D、/etc/rc.d

第6题：

A system administrator has just installed a new maintenance level， but "oslevel -r" does not show the correct maintenance level. What command can be used to determine which filesets are downlevel？（）

• A、lppchk
• B、instfix
• C、fixdist
• D、maintlvl

第7题：

A System p administrator has just installed a new technology level， but "oslevel -r" does not show the expected technology level.  Which of the following commands would determine which filesets are downlevel（）

• A、lppchk
• B、instfix
• C、oslevel
• D、installp

第8题：

A system administrator has just applied an update to an AIX system to correct a problem, The APAR number is IX49035 and was shipped as part of the PTF number U437542. After applying the APAR fix, the administrator wants to ensure that the fix is applied before informing the system users of the corrected problem. Which of the following commands should the system administrator run to verify that the APAR fix has been applied to the system?（）

• A、lslpp -f IX49035
• B、lslpp -fB U437542
• C、instfix -f IX49035
• D、instfix -ik IX49035

第9题：

第10题：

第11题：

第12题：

An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）

• A、odmget
• B、odmadd
• C、odmshow
• D、odmcreate

第13题：

An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

• A、Update the time and date in the BIOS.
• B、Update the firmware on the SCSI controller.
• C、Update the firmware to the latest version.
• D、Configure IPMI on the new board.

第14题：

An administrator has just installed a web server for the companys Internet site. After bringing the system online， customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues.  Which of the following is the MOST likely reason for this？（）

• A、 The servers firewall is misconfigured.
• B、 The server’s timeout feature is set incorrectly.
• C、 The web server was not installed properly.
• D、 The company firewall is misconfigured.

第15题：

The server room that an administrator manages has just caught fire. Which of the following is the FIRST thing that the administrator should do？（）

• A、 Evacuate all personnel.
• B、 Notify staff of the potential service outage.
• C、 Use fire suppression techniques until the fire department arrives.
• D、 Grab the backup tapes and exit the server room.

第16题：

An administrator has a two-disk volume group （testvg） with one logical volume （testlv） which has just  been mirrored across both disk drives.  Which of the following commands can be used to turn off quorum（）

• A、chvg -Qn testvg
• B、chlv -Qn testvg
• C、varyoffvg testvg； varyonvg -Qn testvg
• D、varyoffvg testvg； exportvg testvg； importvg -Qn testvg； varyonvg testvg

第17题：

A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）

• A、/usr/bin/errmsg "System upgraded to AIX 5.2"
• B、/usr/bin/errlog "System upgraded to AIX 5.2"
• C、/usr/bin/errupdate "System upgraded to AIX 5.2"
• D、/usr/bin/errlogger "System upgraded to AIX 5.2"

第18题：

An administrator has mirrored the root volume group to a second disk， but ’bootlist’ is failing to correctly add the second disk.  What is the likely cause of the problem？（）  

• A、The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.
• B、The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.
• C、The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.
• D、The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.

第19题：

第20题：

第21题：