itgle.com

单选题A system administrator used the savevg command to back up the testvg each night. There is now a requirement to exclude the /test/static filesystem from the backup. How can this be accomplished？（）A Use the -X flag on the savevg commandB Put an entry in 

题目
单选题
A system administrator used the savevg command to back up the testvg each night. There is now a requirement to exclude the /test/static filesystem from the backup. How can this be accomplished？（）
A

Use the -X flag on the savevg command

B

Put an entry in the /etc/exclude.testvg file

C

Remove the /test/static entries from the /vgdata/testvg.data file

D

Use the touch command to create /test/static/.exclude before using savevg

相似考题

1.An administrator tries to change the checksum_offload setting on ent0, but the chdev command responds that the adapter is busy.What can be done to resolve this?()A.Use chdev with -P flag and run cfgmgr.B.Use chdev with -R flag and run cfgmgr.C.Use chdev with -P flag and reboot the system.D.Use chdev with -R flag and reboot the system.

2.The /systest filesystem is associated with the /dev/testlv logical volume on the ’testvg’ volume group. Given this information， which of the following commands can the system administrator use to determine if the /systest filesystem is mirrored？（）A、dfB、lsvgC、lsfsD、lsdev

3.A p5 595 does not have any device connected to it for backup. What AIX method should be used to backup each of the LPAR environments and have a quick recovery path?（）A、Use savevg and copy to an NFS filesystemB、Create a mksysb on an NFS exported filesystemC、Use tar to copy system over network with a pipeD、Create mksysb on an NFS exported NIM filesystem

4. The system administrator wants to use a new jfslog /dev/fs1log with the filesystem /test/fs1 on the testvg volume group. The following commands were used to create the log and assign it to the filesystem：  （1）mklv -t jfslog -y /dev/fs1log testvg 1   （2）chfs -a log=/dev/fs1log /test/fs1   While trying to mount the /test/fs1 filesystem the administrator received the error：  "Cannot mount /dev/fs1lv on /test/fs1： A system call received a parameter that is not valid". What step did the administrator miss that most likely caused the error？（）A、Use the logform command to format /dev/fs1log as a jfslogB、Use the chlv command to change the lv type of /dev/fs1log to jfslogC、Use the chvg command to change the default jfslog of testvg to /dev/fs1logD、Edit the /etc/filesystems file to change the log associated with /test/fs1 to /dev/fs1log

更多“单选题A system administrator used the savevg command to back up the testvg each night. There is now a requirement to exclude the /test/static filesystem from the backup. How can this be accomplished？（）A Use the -X flag on the savevg commandB Put an entry in ”相关问题

  • 第1题：

    A system administrator wants to configure a system so that all new users will be put into the database group by default. How would this be accomplished？（）

    • A、remove all other groups from the system
    • B、run the command mkuser -default "GROUP=database"
    • C、change the default group in /usr/lib/security/mkuser.default
    • D、edit /etc/security/group to move all users to the database stanza

    正确答案:C

  • 第2题：

    The df command indicates that a filesystem is full， however， the du command indicates that not all space is allocated.  How would the system administrator isolate the discrepancy（）

    • A、Use the fuser command to identify deleted but open files.
    • B、Use the ipcs command to view orphan shared memory segments.
    • C、Use the defrag command to determine if the filesystem is fragmented.
    • D、Use the topas command to identify processes using the most system resources.

    正确答案:A

  • 第3题：

    A System p administrator has an application that has the data in volume group appvg.  Which of the following commands will back up the contents of appvg to the tape in /dev/rmt0 and check for any read errors （）

    • A、savevg -mf /dev/rmt0 appvg
    • B、savevg -cvf /dev/rmt0 appvg
    • C、savevg -vf /dev/rmt0 appvg
    • D、savevg -f /dev/rmt0 -V appvg

    正确答案:D

  • 第4题：

    How can a directory be excluded from a mksysb backup of the following？（）

    • A、Put an entry in the /etc/exclude.rootvg file
    • B、Put an entry in the /etc/mksysb.exclude file
    • C、Remove the directory’s entry from the mksysb /image.data file
    • D、Remove the directory’s entry from the /var/adm/ras/bosinst.data file

    正确答案:A

  • 第5题：

    How can a directory be excluded from a mksysb backup（）

    • A、Put an entry in the /etc/exclude.rootvg file.
    • B、Put an entry in the /etc/mksysb.exclude file.
    • C、Remove the directory’s entry from the mksysb /image.data file.
    • D、Remove the directory’s entry from the /var/adm/ras/bosinst.data file.

    正确答案:A

  • 第6题：

    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）

    • A、A 5.1 AIX base media set
    • B、A 5.1 Additional Device Driver CD
    • C、A mksysb of the multiprocessor chrp server
    • D、A savevg of the uniprocessor microchannel server

    正确答案:A

  • 第7题：

    You are the network administrator for your company. The network consists of a single Active Directory domain. All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfill the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?（）

    • A、Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
    • B、Use the Backup utility to back up the contents of all mounted drives.
    • C、Use the Backup utility to back up only the System State data.
    • D、Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
    • E、Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.

    正确答案:A

  • 第8题：

    单选题
    The /systest filesystem is associated with the /dev/testlv logical volume on the testvg volume group. The testvg volume group is assigned to physical volumes hdisk2 and hdisk3. Which command can the system administrator use to determine if the /systest filesystem is mirrored？（）
    A

    df

    B

    lslv

    C

    lsfs

    D

    lsdev


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A system administrator wants to configure a system so that all new users will be put into the database group by default. How would this be accomplished？（）
    A

    remove all other groups from the system

    B

    run the command mkuser -default GROUP=database

    C

    change the default group in /usr/lib/security/mkuser.default

    D

    edit /etc/security/group to move all users to the database stanza


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator will use a mksysb from a uniprocessor microchannel server running AIX 5.1 to install a multiprocessor chrp server. What else is required？（）
    A

    A 5.1 AIX base media set

    B

    A 5.1 Additional Device Driver CD

    C

    A mksysb of the multiprocessor chrp server

    D

    A savevg of the uniprocessor microchannel server


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A system administrator has filesystems that should not be mounted during system startup. How can the system administrator prevent the /data filesystem from being mounted during subsequent boots？（）
    A

    mount -no /data

    B

    chfs -A no /data

    C

    mount -t nfs /data

    D

    chfs -a type=nfs /data


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    The /systest filesystem is associated with the /dev/testlv logical volume on the ’testvg’ volume group. Given this information， which of the following commands can the system administrator use to determine if the /systest filesystem is mirrored？（）
    A

    df

    B

    lsvg

    C

    lsfs

    D

    lsdev


    正确答案： A
    解析： 暂无解析

  • 第13题：

    An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）

    • A、Use SMIT to have the server use DHCP instead of a static address
    • B、Edit /etc/rc.tcpip and start the dhcpsd daemon
    • C、Use the network options command to enable ipforwarding
    • D、Edit /etc/rc.net to set network options back to default

    正确答案:B

  • 第14题：

    A system administrator used the savevg command to back up the testvg each night. There is now a requirement to exclude the /test/static filesystem from the backup. How can this be accomplished？（）

    • A、Use the -X flag on the savevg command
    • B、Put an entry in the /etc/exclude.testvg file
    • C、Remove the /test/static entries from the /vgdata/testvg.data file
    • D、Use the touch command to create /test/static/.exclude before using savevg

    正确答案:B

  • 第15题：

    An administrator tries to change the checksum_offload setting on ent0， but the chdev command responds that the adapter is busy.  What can be done to resolve this（）？  

    • A、Use chdev with -P flag and run cfgmgr.
    • B、Use chdev with -R flag and run cfgmgr.
    • C、Use chdev with -P flag and reboot the system.
    • D、Use chdev with -R flag and reboot the system.

    正确答案:C

  • 第16题：

    A system administrator created a /etc/exports file on server "Alpha" and entered a filesystem to be exported to server "Bravo." However， the remote servers are unable to mount the filesystems. What does the system administrator need to do？（）

    • A、Use the exportfs command on server "Alpha" to export the filesystem
    • B、Use the showmount command on server "Bravo" to import the filesystem
    • C、Use the startsrc command on server "Bravo" to refresh the NFS daemons
    • D、Use the chfs command on server "Alpha" to change the filesystem type to NFS

    正确答案:A

  • 第17题：

    A system administrator has an application that has the data in volume group appvg. Which of the following commands will back up the contents of appvg to the tape in /dev/rmt0 and check for any read errors？（）

    • A、savevg -mf /dev/rmt0 appvg
    • B、savevg -cvf /dev/rmt0 appvg
    • C、savevg -xvf /dev/rmt0 appvg
    • D、savevg -f /dev/rmt0 -V appvg

    正确答案:D

  • 第18题：

    The /systest filesystem is associated with the /dev/testlv logical volume on the testvg volume group. The testvg volume group is assigned to physical volumes hdisk2 and hdisk3. Which command can the system administrator use to determine if the /systest filesystem is mirrored？（）

    • A、df
    • B、lslv
    • C、lsfs
    • D、lsdev

    正确答案:B

  • 第19题：

    单选题
    How can a directory be excluded from a mksysb backup of the following？（）
    A

    Put an entry in the /etc/exclude.rootvg file

    B

    Put an entry in the /etc/mksysb.exclude file

    C

    Remove the directory’s entry from the mksysb /image.data file

    D

    Remove the directory’s entry from the /var/adm/ras/bosinst.data file


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    How can a directory be excluded from a mksysb backup（）
    A

    Put an entry in the /etc/exclude.rootvg file.

    B

    Put an entry in the /etc/mksysb.exclude file.

    C

    Remove the directory’s entry from the mksysb /image.data file.

    D

    Remove the directory’s entry from the /var/adm/ras/bosinst.data file.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    An AIX server is configured with a static IP address but the system administrator wants the server to give out IP addresses for clients who want to use the dynamic host configuration protocol instead of static IP addresses.How is this accomplished？（）
    A

    Use SMIT to have the server use DHCP instead of a static address

    B

    Edit /etc/rc.tcpip and start the dhcpsd daemon

    C

    Use the network options command to enable ipforwarding

    D

    Edit /etc/rc.net to set network options back to default


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A p5 595 does not have any device connected to it for backup. What AIX method should be used to backup each of the LPAR environments and have a quick recovery path?（）
    A

    Use savevg and copy to an NFS filesystem

    B

    Create a mksysb on an NFS exported filesystem

    C

    Use tar to copy system over network with a pipe

    D

    Create mksysb on an NFS exported NIM filesystem


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    The system administrator wants to use a new jfslog /dev/fs1log with the filesystem /test/fs1 on the testvg volume group. The following commands were used to create the log and assign it to the filesystem：  （1）mklv -t jfslog -y /dev/fs1log testvg 1   （2）chfs -a log=/dev/fs1log /test/fs1   While trying to mount the /test/fs1 filesystem the administrator received the error：  "Cannot mount /dev/fs1lv on /test/fs1： A system call received a parameter that is not valid". What step did the administrator miss that most likely caused the error？（）
    A

    Use the logform command to format /dev/fs1log as a jfslog

    B

    Use the chlv command to change the lv type of /dev/fs1log to jfslog

    C

    Use the chvg command to change the default jfslog of testvg to /dev/fs1log

    D

    Edit the /etc/filesystems file to change the log associated with /test/fs1 to /dev/fs1log


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    A system administrator used the savevg command to back up the testvg each night. There is now a requirement to exclude the /test/static filesystem from the backup. How can this be accomplished？（）
    A

    Use the -X flag on the savevg command

    B

    Put an entry in the /etc/exclude.testvg file

    C

    Remove the /test/static entries from the /vgdata/testvg.data file

    D

    Use the touch command to create /test/static/.exclude before using savevg


    正确答案： D
    解析： 暂无解析

相关内容