itgle.com

单选题A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the probl

题目
单选题
A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem？（）
A

Faulty cable on the workstation

B

Wrong host name on the workstation

C

Wrong WINS on the workstation

D

Incorrect IP address assigned to the workstation

相似考题

1.While troubleshooting a network connectivity problem, a Ezonexam technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the 7-layer OSI model does the problem most likely exist?A. The data link layerB. The application layerC. The protocol layerD. The access layerE. The session layerF. The network layerG. None of the above

2.A network technician wants to use a packet analyzer to troubleshoot a reported problem with auser‘s workstation with IP address 192.168.1.45. To identify the workstation‘s packets thetechnician wants to use the workstation‘s MAC address.Which of the following protocols would provide the needed information?（）A.DHCPB.ARPC.DNSD.PING

3.While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist（）。A.the session layerB.the protocol layerC.the data link layerD.the access layerE.the network layerF.the application layer

4.A workstation is having connectivity issues when being added to the domain. Which of the following commands would allow the administrator to see the DNS and WINS servers that are currently configured for the workstation?（）A.IpconfigB.NslookupC.NetstatD.Nbtstat

参考答案和解析
正确答案： D
解析： 暂无解析
更多“单选题A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the probl”相关问题

  • 第1题：

    You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）

    • A、UplinkFast on the switch port connected to the server
    • B、BackboneFast on the switch port connected to the server
    • C、PortFast on the switch port connected to the workstation
    • D、trunking on the switch

    正确答案:C

  • 第2题：

    A Windows user is trying to get to a shared folder on a server but is receiving an error message that multiple connections to the same resource are not allowed. Which of the following tools can the technician use from the user’s workstation to get the user reconnected as quickly as possible？（）

    • A、nbtstat with the/reload parameter
    • B、nbtstat with the/resolved parameter
    • C、net use with the/delete parameter
    • D、net use with the/persistent parameter

    正确答案:C

  • 第3题：

    A network technician wants to use a packet analyzer to troubleshoot a reported problem with a user's workstation with IP address 192.168.1.45. To identify the workstation's packets the technician wants to use the workstation's MAC address. Which of the following protocols would provide the needed information?（）

    • A、DHCP
    • B、ARP
    • C、DNS
    • D、PING

    正确答案:B

  • 第4题：

    A workstation no longer has network connectivity. Upon visual inspection, all connectors andsettings seem to be properly configured. Which of the following tools should the technician use to troubleshoot this issue? （）

    • A、PSU tester
    • B、Loopback plug
    • C、Cable tester
    • D、Multimeter

    正确答案:C

  • 第5题：

    A workstation is having connectivity issues when being added to the domain. Which of the following commands would allow the administrator to see the DNS and WINS servers that are currently configured for the workstation?（）

    • A、Ipconfig
    • B、Nslookup
    • C、Netstat
    • D、Nbtstat

    正确答案:A

  • 第6题：

    A technician is replacing a processor in a workstation. After installation, the workstation starts up and immediately shuts down; the technician tries to start the workstation several more times and gets the same result. Which of the following is the cause of this issue?（）

    • A、The workstation is not plugged in.
    • B、The thermal paste was not applied.
    • C、The memory was not installed properly.
    • D、The L2 cache was not cleared.

    正确答案:B

  • 第7题：

    单选题
    A workstation is having connectivity issues when being added to the domain. Which of the following commands would allow the administrator to see the DNS and WINS servers that are currently configured for the workstation?（）
    A

    Ipconfig

    B

    Nslookup

    C

    Netstat

    D

    Nbtstat


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist?（）
    A

    the session layer

    B

    the protocol layer

    C

    the data link layer

    D

    the access layer

    E

    the network layer

    F

    the application layer


    正确答案： F
    解析： 暂无解析

  • 第9题：

    单选题
    A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem？（）
    A

    Faulty cable on the workstation

    B

    Wrong host name on the workstation

    C

    Wrong WINS on the workstation

    D

    Incorrect IP address assigned to the workstation


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A technician is replacing a processor in a workstation. After installation, the workstation starts up and immediately shuts down; the technician tries to start the workstation several more times and gets the same result. Which of the following is the cause of this issue?（）
    A

    The workstation is not plugged in.

    B

    The thermal paste was not applied.

    C

    The memory was not installed properly.

    D

    The L2 cache was not cleared.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?（）
    A

    Network Interface card

    B

    Port expansion card

    C

    Serial interface card

    D

    Modem card


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    A workstation no longer has network connectivity. Upon visual inspection, all connectors andsettings seem to be properly configured. Which of the following tools should the technician use to troubleshoot this issue? （）
    A

    PSU tester

    B

    Loopback plug

    C

    Cable tester

    D

    Multimeter


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which of the following should a technician do FIRST to troubleshoot a users network connectivity problem？（）

    • A、Run TRACERT from the users workstation.
    • B、Start with the Last Known Good Configuration and reboot the computer.
    • C、Replace the network interface card （NIC）.
    • D、PING the users workstation.

    正确答案:D

  • 第14题：

    While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist（）。

    • A、the session layer
    • B、the protocol layer
    • C、the data link layer
    • D、the access layer
    • E、the network layer
    • F、the application layer

    正确答案:E

  • 第15题：

    An administrator is unable to ping a workstation. Which of the following tools would BEST help toresolve the issue?（）

    • A、Cable tester
    • B、Multimeter
    • C、Toner probe
    • D、Protocol analyzer

    正确答案:A

  • 第16题：

    An administrator would like to know the name of the workstation that is being repaired. Which ofthe following commands, without parameters, will provide this information?（）

    • A、Hostname
    • B、Ipconfig
    • C、Netstat
    • D、Ping

    正确答案:A

  • 第17题：

    A technician notices that when trying to ping a workstation by network name the workstation does not reply back over the network. The workstation is part of the domain and is able to get to the Internet. Which of the following is the cause of the problem？（）

    • A、Faulty cable on the workstation
    • B、Wrong host name on the workstation
    • C、Wrong WINS on the workstation
    • D、Incorrect IP address assigned to the workstation

    正确答案:B

  • 第18题：

    A user’s workstation currently has four connected IDE devices. Which of the following could be added to the workstation to allow more ATA devices to be added to the workstation?（）

    • A、Network Interface card
    • B、Port expansion card
    • C、Serial interface card
    • D、Modem card

    正确答案:B

  • 第19题：

    单选题
    Which of the following should a technician do FIRST to troubleshoot a users network connectivity problem？（）
    A

    Run TRACERT from the users workstation.

    B

    Start with the Last Known Good Configuration and reboot the computer.

    C

    Replace the network interface card （NIC）.

    D

    PING the users workstation.


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    If a technician is traveling outside of the US, which of the following should be checked before setting up a workstation? （）
    A

    Local file format

    B

    Wattage setting

    C

    Local power codes

    D

    Voltage setting


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    A Windows user is trying to get to a shared folder on a server but is receiving an error message that multiple connections to the same resource are not allowed. Which of the following tools can the technician use from the user’s workstation to get the user reconnected as quickly as possible？（）
    A

    nbtstat with the/reload parameter

    B

    nbtstat with the/resolved parameter

    C

    net use with the/delete parameter

    D

    net use with the/persistent parameter


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator is unable to ping a workstation. Which of the following tools would BEST help toresolve the issue?（）
    A

    Cable tester

    B

    Multimeter

    C

    Toner probe

    D

    Protocol analyzer


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    A network technician wants to use a packet analyzer to troubleshoot a reported problem with a user's workstation with IP address 192.168.1.45. To identify the workstation's packets the technician wants to use the workstation's MAC address. Which of the following protocols would provide the needed information?（）
    A

    DHCP

    B

    ARP

    C

    DNS

    D

    PING


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    You work as a network Technician. A new workstation has consistently been unable to obtain anIP address from the DHCP server when the workstation boots. Older workstations function normally， and the new workstation obtains an address when manually forced to renew its address.  What should be configured on the switch to allow the workstation to obtain an IP address at boot？（）
    A

    UplinkFast on the switch port connected to the server

    B

    BackboneFast on the switch port connected to the server

    C

    PortFast on the switch port connected to the workstation

    D

    trunking on the switch


    正确答案： D
    解析： 暂无解析

相关内容