单选题A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）A lscons -bB lscons -dC lscons -sD swcons /dev/tty0

第1题：

第2题：

An administrator does not have console access to a Windows Server. Which of the following command line utilities should the administrator use to reboot the system remotely？（）

• A、reboot
• B、pkill
• C、shutdown
• D、kill

第3题：

A system administrator had a disk failure on an HMC. The disk was replaced and the HMC was loaded from the Product Recovery CD. The system administrator had performed a backup to DVD of the HMC data before the system failed. After restoring the backup files, it was noticed that no profile files were restored. What is the most likely cause of this problem?（）

• A、The profile data was not initialized after restoring the backup CD
• B、The profile data was not backed up before doing the Critical Console Data backup
• C、A Critical Console Data backup was performed which backs up user data， but not profile data
• D、A Save Upgrade data was done instead of a backup Critical Console Data and the profile files were not included

第4题：

An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31.  What is the most likely cause？（）

• A、The system is waiting for user input to define console type lft0.
• B、The system is waiting for user input to define console type tty0.
• C、The system is waiting for user input to define console type vty0.
• D、The system is waiting for user input to define console type vsa0.

第5题：

A System p administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down.  Where should the system administrator look for the console log， assuming it is in the default location（）

• A、/var/log/conslog
• B、/var/log/console.log
• C、/var/adm/ras/conslog
• D、/var/ras/console.log

第6题：

The System Administrator wants to do a backup of the HMC and notices that there are two options on the HMC menu: Backup Critical Console data and Save Upgrade Data. Which of the following best describes the differences between the two options?（）

• A、Both options back up user and partition profile data. Only the Backup Critical Console Data backs up TCP/IP settings or preferences
• B、Both options back up partition profile information. Only the Backup Critical Console Data backs up service function settings, such as Inventory Scout, Service Agent, and Service Focal Point
• C、The Backup Critical Console Data should be performed just before the HMC software update operation. The Save Upgrade Data should be performed each time configuration changes are made to the system or the HMC
• D、The Save Upgrade Data should be performed just before the HMC software update operation. The Backup Critical Console Data should be performed each time configuration changes are made to the system or the HMC

第7题：

A system administrator has created tty2 on a serial port connection to a system.  When attempting to verify the connection the following error is observed：   # cu -ml tty2   cu： 0835-028 The connection failed. NO DEVICES AVAILABLE. Which of the following should be performed to correct this error？（）

• A、Create an entry for tty2 in the /etc/uucp/Devices file
• B、Re-enter the command as "cu -dml tty2"
• C、Create an entry for tty2 in the /etc/uucp/Systems file
• D、Re-enter the command as "cu -s 9600 -dh -t -l tty2"

第8题：

第9题：

第10题：

第11题：

第12题：

第13题：

A system administrator noticed several error messages on the screen while the system was booting up； but was not able to write them down. Where should the system administrator look for the console log， assuming it is in the default location？（）

• A、/tmp/conslog
• B、/etc/console.log
• C、/var/adm/ras/conslog
• D、/var/ras/console.log

第14题：

A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）

• A、lscons -b
• B、lscons -d
• C、lscons -s
• D、swcons /dev/tty0

第15题：

A server is being set up at a client location. The system has been powered up for a clean install of the base OS. The CD is in the drive. After 5 minutes, the system is hung. There is no activity with the CD-ROM drive and nothing to select on the screen. Which of the following procedures should be performed next?（）

• A、Boot off diskette and change boot device to CD
• B、Change the bootlist for normal mode and reboot
• C、Reboot and press 5/F5 after keyboard is displayed on the screen
• D、Press enter to open SP menus once OK is showing in the LEDs

第16题：

A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?（）

• A、Reboot system sing the mkdev -l command.
• B、Install device support suing the cfgmgr -i command.
• C、Use the SMIT console to redirect the console.
• D、Use SMIT devices and choose the correct adapter.

第17题：

Which of the following commands should be used to check the settings for a new tty that was just set up as tty2？（）

• A、lsattr -El tty2
• B、lscons -d /dev/tty2
• C、lscfg -vl tty2
• D、what /dev/tty2

第18题：

Which of the following will permit an operator to retrieve console log output from the command line?（）

• A、lscons -l
• B、cat /var/conslog
• C、alog -t console -o
• D、lslog /var/adm/conslog

第19题：

第20题：

第21题：

第22题：

第23题：