单选题Which of the following BEST describes the initial process of setting up a new operating system from a CD-ROM? （）A Format a partition, install device drivers, and install the operating system.B Create a partition, format the partition, and install the o

第1题：

You are the administrator of ExamSheet's network.  The software department is preparing to rewrite an accounting application so that it will run on  Windows 2000 Professional computers. All of the computers in the software department currently use Windows 98. You plan to configure the computers in the software department so that users can use both Windows 98 and Windows 2000 Professional during the project. You want to ensure that users in the software department can access all of the files on their computers while using operating system.  What should you do?（）

• A、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create a primary partition in the remaining disk space and format the volume using the FAT32 file system.Reinstall Windows 98 on the new primary partition. 
• B、Create and format an NTFS volume. Install Windows 2000 Professional on the volume. Create an extended partition in the remaining disk space and format the volume using the FAT32 file system. Reinstall Windows 98 on the new extended partition. 
• C、Create and format and extended partition. Create a logical drive within the extended partition and format the drive with the FAT32 file system. Install Windows 2000 Professional on the new partition. 
• D、Create and format an extended partition. Create a logical drive within the extended partition and format the drive with the NTFS file system. Install Windows 2000 Professional on the new partition.

第2题：

A System x client is interested in IBM ToolsCenter Bootable Media Creator but is concerned about functions.Which of the following describes the functions of ToolsCenter Bootable Media ?（）

• A、Update Firmware, Update Drivers, Run Diagnostics, Install Windows 
• B、Update Firmware, Run Diagnostics, Install Windows, and Linux Operating Systems
• C、Update Firmware, Run Diagnostics, Install Windows 
• D、Update Firmware, Update Drivers, Install Windows

第3题：

A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）

• A、Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management procedures
• B、Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking information
• C、Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）
• D、Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams

第4题：

Which of the following methods can be used to apply a file system to a hard drive partition?（）

• A、Device Manager MMC
• B、Format Command
• C、Disk Management MMC
• D、Windows Explorer Menus
• E、FDISK Command

第5题：

Which of the following will allow a technician to extend a partition?（）

• A、Set the drive up as basic
• B、Format the drive to FAT32
• C、Install a second hard drive
• D、Set the drive as dynamic

第6题：

A client will be creating partitions on multiple systems with identical configurations. What is the recommended method for cloning the master partition?（）

• A、Create a mksysb backup of the original and restore it to the new partitions
• B、Use NIM to load the additional partitions from an image of the original partition
• C、Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
• D、Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions

第7题：

Company.com is having trouble installing a fresh AIX image onto a newly defined partition on a p5-520. The assignment of the adapters to the each of the partitions is as follows： Fibre Channel Card 01 - partition one - required  Fibre Channel Card 02 - partition one - required  SCSI adapter 01 - partition one - desired  IDE adapter 01 - partition one - required  Ethernet adapter 01 - partition one - required  Ethernet adapter 01 - partition two - required  SCSI adapter 02 - partition two - required  IDE adapter 01 - partition two - desired  Which of the following actions will enable the installation of the AIX image？（）

• A、Change the IDE adapter from desired to required in partition two and restart the partition to release the resource.
• B、Purchase a SCSI DVD-ROM drive to connect to the SCSI adapter in partition two.
• C、Purchase an LTO tape drive so that a system image backup can be created to install a new AIX partition.
• D、Change the IDE adapter from required to desired in partition one and restart the partition to release the resource.

第8题：

You need to configure a new computer to dual-boot to the following operating systems：  Microsoft Windows XP Professional Microsoft Windows Vista  Which two procedures should you perform？ （）

• A、Create two partitions. Install Windows XP Professional on the first partition. Boot the computer from the Windows Vista DVD-ROM. Install Windows Vista on the second partition.
• B、Create two partitions. Install Windows Vista on the first partition. Boot from the Windows XP Professional installation CD-ROM. Install Windows XP Professional on the second partition. 
• C、Create one partition. Install Windows XP Professional on the partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista in the same partition. 
• D、Create two partitions. Install Windows XP Professional on the first partition. From Windows XP Professional launch the Windows Vista setup utility. Install Windows Vista on the second partition.

第9题：

第10题：

第11题：

第12题：

第13题：

IBM ToolsCenter Bootable Media Creator is used to create bootable media. Which of the following functions can be performed with this tool？（）

• A、Update Firmware， Update Drivers， Run Diagnostics Install Windows
• B、Update Firmware， Update Drivers， Run Diagnostics Install Windows and Linux Operating systems
• C、Update Firmware， Run Diagnostics， Install Windows
• D、Update Firmware， Update Drivers. Install Windows

第14题：

Which of the following steps would be performed FIRST to install a fresh copy of Windows 7Professional on a new hard drive?（）

• A、Format the partition
• B、Load any RAID or SATA drivers needed
• C、Partition the drive
• D、Configure Windows settings

第15题：

If an external monitor is attached to a laptop and it does not work， which of the following actions should a technician take FIRST？（）

• A、Re-install the operating system.
• B、Open and close the cover.
• C、Use the function key to activate the monitor.
• D、Install new software for the keyboard.

第16题：

A technician installed a new motherboard in a workstation. Which of the following describes theBEST steps for a proper installation?（）

• A、Install the OS, the application software and then hardware drivers.
• B、Install the chipset driver, the OS and then the hardware drivers.
• C、Install the hardware drivers, the chipset driver and then the OS.
• D、Install the OS, the chipset driver and then the hardware drivers.

第17题：

A customer has an entry level Power System that is currently partitioned and managed by a Hardware Management Console （HMC）. For operational reasons， it must be disconnected from the HMC and configured as a new development system.  How should the customer proceed to implement PowerVM Express and Integrated Virtualization Manager （IVM） on this Power System？ （）

• A、 Install a VIO server as an additional partition and DLPAR the resources from the existing partition to the VIO server.
• B、 Create a service partition and install a VIO server. This will automatically move resources to the VIO server on reboot of the managed system.
• C、 Delete all the existing LPARs， create a new LPAR and assign all the system resources to this LPAR and then install the VIO server on this LPAR.
• D、 Reset the machine to Manufacturing Default Configuration and install the VIO server on the resulting partition created， which will own all system resources.

第18题：

A customer is running a number of non-IBM servers purchased two years ago and has settled on one of the new IBM xSeries servers as a migration path.  From the following options， which is the preferred migration path？（）

• A、Copy the image of the non-IBM servers and copy that image to the IBM servers， then reboot the IBM servers.
• B、Copy the image from the non-IBM servers with RDM and install them with IBM Director to the new IBM servers. Reboot the IBM servers.
• C、Install a fresh operating system using ServerGuide， and then install the applications and copy the data from the old servers.
• D、Install a fresh operating system on the IBM servers and then run ServerGuide on the IBM servers to migrate the applications and data to the IBM servers.

第19题：

You are rewriting an accounting application so it will run on computers loaded with both the Win2000 Pro and Win NT 4 with service pack 4. Computers must be configured for optimal disk performance. Users must be able to access all of the files on their computers using either operating system. File level security is also required to protect the files. What should you do?（）

• A、Create and format a FAT32 partition.
• B、Create and format a NTFS partition.
• C、Configure Windows 2000 to enable dynamic volume.
• D、Create and format a FAT16 partition.

第20题：

Which of the following BEST describes the initial process of setting up a new operating system from a CD-ROM? （）

• A、Format a partition, install device drivers, and install the operating system.
• B、Create a partition, format the partition, and install the operating system.
• C、Install the operating system, create a partition, and install device drivers.
• D、Install the operating system, install device drivers, and create a partition.

第21题：

第22题：

第23题：

第24题：