itgle.com

多选题Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）AState synchronization occurs only through the internal network interface card (NIC)BLatency of the WAN must be less than 300 ms.CAuthenti

题目
多选题
Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）
A

State synchronization occurs only through the internal network interface card (NIC)

B

Latency of the WAN must be less than 300 ms.

C

Authenticating endpoints must be on the same LAN segment.

D

Cluster members must use the same hardware platfor

相似考题

1.Which Junos Pulse feature allows the user to log in once through a Junos Pulse Secure Access Service on the network and then access resources protected by a Junos Pulse Access Control Service without reauthentication?（）A. Roaming SessionB. Session MigrationC. Location AwarenessD. Persistent Session

2.End users want to map a network drive on their PCs when they are connected to the Junos Pulse Access Control Service. The mapped drive must be removed when users disconnect their session.Which feature addresses this requirement?（）A. agent session scriptsB. preconfiguration installerC. Junos Pulse component setD. agent actions

3.You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI).To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）A. CLIB. WebUIC. NSMD. Junos Pulse Access Control Service

4.Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?()A. State synchronization occurs only through the internal network interface card (NIC)B. Latency of the WAN must be less than 300 ms.C. Authenticating endpoints must be on the same LAN segment.D. Cluster members must use the same hardware platfor

更多“多选题Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）AState synchronization occurs only through the internal network interface card (NIC)BLatency of the WAN must be less than 300 ms.CAuthenti”相关问题

  • 第1题：

    You want to provide 802.1X access for Windows clients using Junos Pulse as the agent. Which two considerations must you take into account()

    A.Junos Pulse out erauth entication uses EAP-PEAP.

    B.Junos Pulse ou terauth entication uses EAP-TTLS.

    C.Junos Pulse innerauth entication uses EAP-MSCHAP-V2.

    D.Theend point must use thenative Microsoft 802.1X supplicant.


    参考答案：B, D

  • 第2题：

    A customer is deploying a new Junos Pulse Access Control Service and has completed the initial boot configuration as prompted using a serial connection. The customer now wants to complete the rest of the configuration using the admin GUI.Into which port on the Junos Pulse Access Control Service should the customer plug the network cable to enable access to the admin GUI?（）

    A. the internal interface

    B. the external interface

    C. the management interface

    D. the console interface


    参考答案：A

  • 第3题：

    A customer is deploying a new Junos Pulse Access Control Service and has completed the initial boot configuration as prompted using a serial connection. The customer now wants to complete the rest of the configuration using the admin GUI.Into which port on the Junos Pulse Access Control Service should the customer plug the network cable to enable access to the admin GUI?（）

    • A、the internal interface
    • B、the external interface
    • C、the management interface
    • D、the console interface

    正确答案:A

  • 第4题：

    End users want to map a network drive on their PCs when they are connected to the Junos Pulse Access Control Service. The mapped drive must be removed when users disconnect their session.Which feature addresses this requirement?（）

    • A、agent session scripts
    • B、preconfiguration installer
    • C、Junos Pulse component set
    • D、agent actions

    正确答案:A

  • 第5题：

    A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access Controe Service. When configuring the switch on the Junos Pulse Access Control Service, the customer does not find a make/model entry for it . Which two actions should the customer take to make the switch work with the Junos Pulse Access Control Service?（）

    • A、Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
    • B、Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
    • C、Add the switch as a firewall enforcer.
    • D、Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the make/model.

    正确答案:A,D

  • 第6题：

    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）

    • A、Session-Export policies on the Junos Pulse Secure Access Service
    • B、Session-Export policies on the Junos Pulse Access Control Service
    • C、Session-Import policies on the Junos Pulse Secure Access Service
    • D、Session-Import policies on the Junos Pulse Access Control Service
    • E、Resource access policies on the Junos Pulse Access Control Service

    正确答案:A,D,E

  • 第7题：

    You want to provide 802.1X access for Windows clients using Junos Pulse as the agent. Which two considerations must you take into account（）

    • A、Junos Pulse out erauth entication uses EAP-PEAP.
    • B、Junos Pulse ou terauth entication uses EAP-TTLS.
    • C、Junos Pulse innerauth entication uses EAP-MSCHAP-V2.
    • D、Theend point must use thenative Microsoft 802.1X supplicant.

    正确答案:B,D

  • 第8题：

    You are deploying a Junos Pulse Access Control Service cluster in active/passive mode. How do you configure the IP address on the SRX Series devices?（）

    • A、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP as the IP address the instance.
    • B、Configure multiple Junos Pulse Access Control Service instances on the enforcer, specifying the specific IP address each device in a separate instance.
    • C、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and active node address in the instance.
    • D、Configure a single Junos Pulse Access Control Service instance on the enforcer, specifying the VIP and passive node address in the instance.

    正确答案:A

  • 第9题：

    多选题
    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）
    A

    CLI

    B

    WebUI

    C

    NSM

    D

    Junos Pulse Access Control Service


    正确答案： A,D
    解析： 暂无解析

  • 第10题：

    多选题
    A user is successfully authenticating to the network but is unable to access protected resources behind a ScreenOS enforcer. You log in to the ScreenOS enforcer and issue the command get auth table infranet and you do not see the user listed.Which two event log settings on the Junos Pulse Access Control Service must you enable to troubleshootthis issue?（）
    A

    Connection Requests

    B

    System Errors

    C

    Enforcer Events

    D

    Enforcer Command Trace


    正确答案： B,A
    解析： 暂无解析

  • 第11题：

    多选题
    A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access Controe Service. When configuring the switch on the Junos Pulse Access Control Service, the customer does not find a make/model entry for it . Which two actions should the customer take to make the switch work with the Junos Pulse Access Control Service?（）
    A

    Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.

    B

    Add the switch to the Junos Pulse Access Control Service using the Any make/model.

    C

    Add the switch as a firewall enforcer.

    D

    Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the make/model.


    正确答案： D,B
    解析： 暂无解析

  • 第12题：

    单选题
    End users want to map a network drive on their PCs when they are connected to the Junos Pulse Access Control Service. The mapped drive must be removed when users disconnect their session.Which feature addresses this requirement?（）
    A

    agent session scripts

    B

    preconfiguration installer

    C

    Junos Pulse component set

    D

    agent actions


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）

    A. Session-Export policies on the Junos Pulse Secure Access Service

    B. Session-Export policies on the Junos Pulse Access Control Service

    C. Session-Import policies on the Junos Pulse Secure Access Service

    D. Session-Import policies on the Junos Pulse Access Control Service

    E. Resource access policies on the Junos Pulse Access Control Service


    参考答案：A, D, E

  • 第14题：

    Which two considerations must you take into account when deploying a Junos Pulse Access Control Service cluster?（）

    • A、State synchronization occurs only through the internal network interface card (NIC)
    • B、Latency of the WAN must be less than 300 ms.
    • C、Authenticating endpoints must be on the same LAN segment.
    • D、Cluster members must use the same hardware platfor

    正确答案:A,D

  • 第15题：

    Your security policy requires that users authenticating to the Junos Pulse Access Control Service are connecting from a domain member endpoint on the internal corporate network.Which set of role access restrictions must you configure to enforce this security policy?（）

    • A、Source IP and browser
    • B、Source IP and certificate
    • C、Certificate and Host Checker
    • D、Host Checker and source IP

    正确答案:D

  • 第16题：

    You want to create a security policy on an SRX240 that redirects unauthenticated users back to the Junos Pulse Access Control Service.Which two steps must you take to accomplish this task?（）

    • A、Configure a captive-portal service that redirects all traffic back to the Junos Pulse Access Control Service.
    • B、Configure a security policy that references the unified-access-control captive-portal service.
    • C、Configure a captive-portal service that redirects unauthenticated traffic back to the Junos Pulse Access Control Service.
    • D、Configure a security policy that references the unified-access-control intranet-controller service.

    正确答案:B,C

  • 第17题：

    Which Junos Pulse feature allows the user to log in once through a Junos Pulse Secure Access Service on the network and then access resources protected by a Junos Pulse Access Control Service without reauthentication?（）

    • A、Roaming Session
    • B、Session Migration
    • C、Location Awareness
    • D、Persistent Session

    正确答案:B

  • 第18题：

    A customer has purchased a new Junos Pulse Access Control Service and wants to install it in an existing cluster.After initial configuration, the customer finds that the firmware version running on the Junos Pulse Access Control Service is 4.1 r5, but the existing cluster is running firmware version 4.1 r3. Which two actions must be performed to allow the new Junos Pulse Access Control Service to load the older version of firmware?（）

    • A、Install a valid license on the new Junos Pulse Access Control Service.
    • B、When loading the older firmware, delete all the existing data on the Junos Pulse Access Control Service.
    • C、Add the new Junos Pulse Access Control Service to the existing cluster.
    • D、Download the 4.1 r3 version firmware from the Juniper support website.

    正确答案:B,D

  • 第19题：

    You have a firewall enforcer receiving resource access policies from a Junos Pulse Access Control Service. You are using Network and Security Manager (NSM) for configuration management on that firewall. The firewall can also be configured using its built-in command-line interface (CLI) or Web-based user interface (WebUI). To avoid conflicting configurations, which two interfaces must you use to configure the firewall enforcer?（）

    • A、CLI
    • B、WebUI
    • C、NSM
    • D、Junos Pulse Access Control Service

    正确答案:C,D

  • 第20题：

    多选题
    You want to create a security policy on an SRX240 that redirects unauthenticated users back to the Junos Pulse Access Control Service.Which two steps must you take to accomplish this task?（）
    A

    Configure a captive-portal service that redirects all traffic back to the Junos Pulse Access Control Service.

    B

    Configure a security policy that references the unified-access-control captive-portal service.

    C

    Configure a captive-portal service that redirects unauthenticated traffic back to the Junos Pulse Access Control Service.

    D

    Configure a security policy that references the unified-access-control intranet-controller service.


    正确答案： A,D
    解析： 暂无解析

  • 第21题：

    多选题
    Which three types of policies must you configure to allow remote users transparent access to protected resources using IF-MAP Federation between a Junos Pulse Secure Access Service and a Junos Pulse Access Control Service?（）
    A

    Session-Export policies on the Junos Pulse Secure Access Service

    B

    Session-Export policies on the Junos Pulse Access Control Service

    C

    Session-Import policies on the Junos Pulse Secure Access Service

    D

    Session-Import policies on the Junos Pulse Access Control Service

    E

    Resource access policies on the Junos Pulse Access Control Service


    正确答案： B,A
    解析： 暂无解析

  • 第22题：

    多选题
    You want to provide 802.1X access for Windows clients using Junos Pulse as the agent. Which two considerations must you take into account（）
    A

    Junos Pulse out erauth entication uses EAP-PEAP.

    B

    Junos Pulse ou terauth entication uses EAP-TTLS.

    C

    Junos Pulse innerauth entication uses EAP-MSCHAP-V2.

    D

    Theend point must use thenative Microsoft 802.1X supplicant.


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    多选题
    A customer has purchased a new Junos Pulse Access Control Service and wants to install it in an existing cluster.After initial configuration, the customer finds that the firmware version running on the Junos Pulse Access Control Service is 4.1 r5, but the existing cluster is running firmware version 4.1 r3. Which two actions must be performed to allow the new Junos Pulse Access Control Service to load the older version of firmware?（）
    A

    Install a valid license on the new Junos Pulse Access Control Service.

    B

    When loading the older firmware, delete all the existing data on the Junos Pulse Access Control Service.

    C

    Add the new Junos Pulse Access Control Service to the existing cluster.

    D

    Download the 4.1 r3 version firmware from the Juniper support website.


    正确答案： C,B
    解析： 暂无解析

相关内容