itgle.com

单选题What is the correct syntax for applying node-specific parameters to each node in a chassis cluster?（）A set apply-groups node$B set apply-groups (node)C set apply-groups $(node)D set apply-groups (node)all

题目
单选题
What is the correct syntax for applying node-specific parameters to each node in a chassis cluster?（）
A

set apply-groups node$

B

set apply-groups (node)

C

set apply-groups $(node)

D

set apply-groups (node)all

相似考题

1.Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?()A. user@host# set chassis cluster cluster-id 1 node 0 rebootB. user@host> set chassis cluster id 1 node 0 rebootC. user@host> set chassis cluster cluster-id 1 node 0 rebootD. user@host# set chassis cluster id 1 node 0 reboot

2.What is the correct syntax for applying node－specific parameters to each node in a chassis cluster?()A. set apply-groups node$B. set apply-groups (node)C. set apply-groups $(node)D. set apply-groups (node)all

3.In a cable HFC plant， what is a modulator？（）A、Set top boxB、Diplex filterC、Local head endD、Fiber node

4.If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }

更多“单选题What is the correct syntax for applying node-specific parameters to each node in a chassis cluster?（）A set apply-groups node$B set apply-groups (node)C set apply-groups $(node)D set apply-groups (node)all”相关问题

  • 第1题：

    Which statement regaming high availabily in the Cisco UCS is correct?（）

    • A、A node is one of the two（2）CMCs
    • B、A node is one of the two（2）Fabric Interconnects
    • C、A group is a set off our（4）nodes
    • D、Each group is identified by a floating node ID

    正确答案:B

  • 第2题：

    During a cluster functionality test， and administrator performs a graceful stop for Node ’B’ in a three-node cluster. What is the expected state of the cluster after Node ’B’successfully completes？（）  

    • A、 All cluster resources halt on Node ’B’，and one or both surviving nodes will gracefully acquire the resources.
    • B、 All cluster processes halt on Node ’B’，the cluster resources remain active，and the remaining  nodes take no action.
    • C、 All cluster processes stay active on Node ’B’，cluster resources are halted，and the remaining nodes take no action.
    • D、 All cluster resources will stop，cluster processes halt on Node ’B’，and the remaining cluster nodes take no action.

    正确答案:D

  • 第3题：

    A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’.  What type of configuration would cause this type of behavior？（）  

    • A、 The resource group DNP has been configured.
    • B、 The resource group option CWOF has been enabled.
    • C、 The resource group option Inactive Takeover is set.
    • D、 A resource group fallback timer has been configured.

    正确答案:B

  • 第4题：

    An administrator has a two node cluster， Node1 and Node2， running resource group rg1. The resource groupis active on Node1. The administrator stopped cluster services and unmanaged the resource group on Node1to work on a problem. Now the administrator needs to move rg1 to Node2. Which of the following will achievethis？（）

    • A、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Manually’ and select the destination ofNode2
    • B、Perform a resource group move operation from Node1 to Node2 and select the option to ’Re-manageResource Groups’ set to ’Automatically’
    • C、Perform a clstop on Node1 with option to move resource groups， this will release the resource group fromNode1 and accquire the resource group on Node2.
    • D、Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Automatically’， then perform a resourcegroup move operation to move rg1 from Node1 to Node2

    正确答案:D

  • 第5题：

    What is the correct syntax for applying node-specific parameters to each node in a chassis cluster?（）

    • A、set apply-groups node$
    • B、set apply-groups (node)
    • C、set apply-groups $(node)
    • D、set apply-groups (node)all

    正确答案:C

  • 第6题：

    单选题
    You have configured your chassis cluster to include redundancy group 1. Node 0 is configured to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover?（）
    A

    request chassis cluster manual failover group 1 node 1

    B

    request cluster failover redundancy-group 1 node 1

    C

    request chassis cluster manual failover redundancy-group 1 node 1

    D

    request chassis cluster failover redundancy-group 1 node 1


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    An administrator plans to apply a fix pack to the PowerHA software using a rolling migration. At what stage ofthe migration is a cluster verification supported？（）
    A

    Individually before each node is upgraded

    B

    Individually before and after each node is upgraded

    C

    Individually after each node has been upgraded

    D

    Collectively after all nodes have been upgraded


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    A new administrator is performing fallover testing on a two-node cluster and is concerned that the cascading resource group belonging to Node ’A’ did not reintegrate properly after the cluster was restarted on Node ’A’. A stable cluster is reported by clstat，and clRGinfo reports the resource group online on Node ’B’.  What type of configuration would cause this type of behavior？（）
    A

     The resource group DNP has been configured.

    B

     The resource group option CWOF has been enabled.

    C

     The resource group option Inactive Takeover is set.

    D

     A resource group fallback timer has been configured.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator has a two node cluster， Node1 and Node2， running resource group rg1. The resource groupis active on Node1. The administrator stopped cluster services and unmanaged the resource group on Node1to work on a problem. Now the administrator needs to move rg1 to Node2. Which of the following will achievethis？（）
    A

    Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Manually’ and select the destination ofNode2

    B

    Perform a resource group move operation from Node1 to Node2 and select the option to ’Re-manageResource Groups’ set to ’Automatically’

    C

    Perform a clstop on Node1 with option to move resource groups， this will release the resource group fromNode1 and accquire the resource group on Node2.

    D

    Perform a clstart on Node1 with ’Manage Resource Groups’ set to ’Automatically’， then perform a resourcegroup move operation to move rg1 from Node1 to Node2


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    You are a network administrator for your company. The network contains four Windows Server 2003 computers configured as a four-node server cluster.   Each cluster node is the preferred owner of a clustered instance of Microsoft SQL Server 2000， and each cluster node is configured as a possible owner of all other instances of SQL Server. All nodes have identically configured hardware. All four nodes operate at a sustained 70 percent CPU average.   You add a server that has identically configured hardware to the cluster as a fifth node.   You want each SQL Server instance to continue operating at the same level of performance in the event of a single node failure.   What should you do？ （）
    A

     Clear the Affect group check box in the cluster resource properties for each SQL Server instance.

    B

     Configure the fifth node as the only possible owner other than the existing preferred owner of the cluster resources that are associated with each SQL Server instance.

    C

     Configure the fifth node as the preferred owner of each cluster group that contains an SQL Server instance.

    D

     Enable failback on each group that contains an SQL Server instance.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?（）
    A

    user@host# set chassis cluster cluster-id 1 node 0 reboot

    B

    user@host> set chassis cluster id 1 node 0 reboot

    C

    user@host> set chassis cluster cluster-id 1 node 0 reboot

    D

    user@host# set chassis cluster id 1 node 0 reboot


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）
    A

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }

    B

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }

    C

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }

    D

    [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }


    正确答案： C
    解析： 暂无解析

  • 第13题：

    An administrator plans to apply a fix pack to the PowerHA software using a rolling migration. At what stage ofthe migration is a cluster verification supported？（）

    • A、Individually before each node is upgraded
    • B、Individually before and after each node is upgraded
    • C、Individually after each node has been upgraded
    • D、Collectively after all nodes have been upgraded

    正确答案:D

  • 第14题：

    An administrator is planning a cluster running applications in 3 separate resource groups. RGA - Database 1 RGB - Web Server RGC - Database 2 Database 1 and Database 2 must be online before the Web Server. All resource groups have a Startup Policyof Online on Home Node Only. Which of the following will ensure that the resource groups are processed in the correct order？（）

    • A、Set the Serial Acquisition Order
    • B、Set the Parallel Acquisition Order
    • C、Configure Online on the Same Node Dependency
    • D、Configure Online on Different Nodes Dependency

    正确答案:A

  • 第15题：

    Company.com has a four-node cluster （nodes ’A’， ’B’， ’C’， and ’D’）. The nodes are set up in  Resource group pairs. Node ’A’ falls over to Node ’B’， and Node ’C’ falls over to Node ’C’. During a maintenance windows， it was discovered that the six resource groups on Node ’A’ are too much to be adequately handled by Node ’B’.  What could be done to better utilize the available resources during fallover？（）  

    • A、 Implement Work Load manager so that the application monitors for additional resource      requirements.
    • B、 Add a fifth node to function as a load leveler in order to control the dispatching of the resource jobs.
    • C、 Implement Dynamic Node Priorities in the resource groups in order to find a node with suitable system resources.
    • D、 Reduce the number of resource groups on Node ’A’ to 1 in order to ensure faster and more robust fallover to a single system.

    正确答案:C

  • 第16题：

    You have configured your chassis cluster to include redundancy group 1. Node 0 is configured to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover?（）

    • A、request chassis cluster manual failover group 1 node 1
    • B、request cluster failover redundancy-group 1 node 1
    • C、request chassis cluster manual failover redundancy-group 1 node 1
    • D、request chassis cluster failover redundancy-group 1 node 1

    正确答案:D

  • 第17题：

    Which command would you use to enable chassis cluster on an SRX device, setting the cluster ID to 1 and node to 0?（）

    • A、user@host# set chassis cluster cluster-id 1 node 0 reboot
    • B、user@host> set chassis cluster id 1 node 0 reboot
    • C、user@host> set chassis cluster cluster-id 1 node 0 reboot
    • D、user@host# set chassis cluster id 1 node 0 reboot

    正确答案:C

  • 第18题：

    单选题
    Company.com has a four-node cluster （nodes ’A’， ’B’， ’C’， and ’D’）. The nodes are set up in  Resource group pairs. Node ’A’ falls over to Node ’B’， and Node ’C’ falls over to Node ’C’. During a maintenance windows， it was discovered that the six resource groups on Node ’A’ are too much to be adequately handled by Node ’B’.  What could be done to better utilize the available resources during fallover？（）
    A

     Implement Work Load manager so that the application monitors for additional resource      requirements.

    B

     Add a fifth node to function as a load leveler in order to control the dispatching of the resource jobs.

    C

     Implement Dynamic Node Priorities in the resource groups in order to find a node with suitable system resources.

    D

     Reduce the number of resource groups on Node ’A’ to 1 in order to ensure faster and more robust fallover to a single system.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    During a cluster functionality test， and administrator performs a graceful stop for Node ’B’ in a three-node cluster. What is the expected state of the cluster after Node ’B’successfully completes？（）
    A

     All cluster resources halt on Node ’B’，and one or both surviving nodes will gracefully acquire the resources.

    B

     All cluster processes halt on Node ’B’，the cluster resources remain active，and the remaining  nodes take no action.

    C

     All cluster processes stay active on Node ’B’，cluster resources are halted，and the remaining nodes take no action.

    D

     All cluster resources will stop，cluster processes halt on Node ’B’，and the remaining cluster nodes take no action.


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    During a planning session， it is determined that a three node cluster （Node ’A’， Node ’B’， and Node ’C’） will meet the customer’s application needs. Node ’B’ will be a hot-standby fallover node for both Node ’A’ and Node ’C’ resource groups.  A serial network for this cluster will require which connections？（）
    A

     A single serial network between Node ’A’ and Node ’B’ and Node ’C’

    B

     A point-to-point link between Node ’A’ and Node ’C’，and Node ’B’ and Node ’C’

    C

     A serial network between Node ’A’ and Node ’C’，and a serial network between Node ’B’ and Node ’C’

    D

     A point-to-point link between Node ’A’ and Node ’B’ Node ’B’ and Node ’C’ and Node ’A’ ad Node ’C’


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which statement regaming high availabily in the Cisco UCS is correct?（）
    A

    A node is one of the two（2）CMCs

    B

    A node is one of the two（2）Fabric Interconnects

    C

    A group is a set off our（4）nodes

    D

    Each group is identified by a floating node ID


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    [edit groups] user@host# show node0 { system { host-name NODE0； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24； } } } } } node1 { system { host-name NODE1； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24； } } } } } In the exhibit， what is the function of the configuration statements？（）
    A

    This section is where you define all chassis clustering configuration.

    B

    This configuration is required for members of a chassis cluster to talk to each other.

    C

    You can apply this configuration in the chassis cluster to make configuration easier.

    D

    This section is where unique node configuration is applied.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    [edit groups] user@host# show node0 { system { host-name NODE0； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.1/24； } } } } } node1 { system { host-name NODE1； } interfaces { fxp0 { unit 0 { family inet { address 1.1.1.2/24； } } } } } In the exhibit， what is the function of the configuration statements？（）
    A

    This section is where you define all chassis clustering configuration.

    B

    This configuration is required for members of a chassis cluster to talk to each other.

    C

    You can apply this configuration in the chassis cluster to make configuration easier.

    D

    This section is where unique node configuration is applied.


    正确答案： D
    解析： 暂无解析

相关内容