itgle.com

单选题A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）A VLANB zoningC tru

题目
单选题
A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）
A

VLAN

B

zoning

C

trunking

D

LUN masking

相似考题

1.A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）A.VLANB.zoningC.trunkingD.LUN masking

2.Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）A、 The switch receives the FCoE frame and forwards it to another switch over its VE port.B、 The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.C、 The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.D、 The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.

3.Which of the following is the correct configuration for a RAID 5 array?（）A、A two disk set with one data stripB、A three disk set with two data strips and a parity stripC、A two disk set with two data stripsD、A four disk set with two sets of data strips

4.Refer to the exhibit.Switch－1 needs to send data to a host with a MAC address of 00b0.d056.efa4.What will Switch－1 do with this data?()A.switch-1 will drop the data because it dose not have an entry for that MAC addressB.switch-1 will flood the data out all of its port from which the data originatedC.switch-1 will forward the data to its default gatewayD.tch-1 will send an ARP request out all its ports except the port from which the data originated

参考答案和解析
正确答案： A
解析： 暂无解析
更多“单选题A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）A VLANB zoningC tru”相关问题

  • 第1题：

    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）

    • A、4
    • B、3
    • C、2
    • D、8

    正确答案:A

  • 第2题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）

    • A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch
    • B、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch
    • C、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第3题：

    A customer has two locations that host their pSeries servers.  Traffic is being routed through the public Internet.  The customer needs to exchange confidential financial data between the servers.  Which of the following solutions should the pSeries technical specialist propose to the customer to secure the data？（）

    • A、A DCE domain
    • B、A Kerberos domain
    • C、A PPP tunnel between the servers
    • D、An IPSEC tunnel between the servers

    正确答案:D

  • 第4题：

    While installing a new IBM System Storage DS5100 into a customer’s data center， it is discoveredthat the customer does not have enough available Fibre Channel ports on their switches. Which ofthe following should have been used to avoid this situation？（）

    • A、IBM DS5000 Cabling Tool
    • B、IBM e-Configurator Tool
    • C、IBM Pre-Installation TDA Checklist
    • D、IBM Standalone Solutions Configuration Tool

    正确答案:C

  • 第5题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
    • D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    正确答案:C

  • 第6题：

    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）

    • A、Two additional power supplies
    • B、Fibre Channel （FC） switches and SAN storage
    • C、A Nortel 1/10 GB ESM
    • D、SSD for the HX5

    正确答案:A

  • 第7题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）
    A

    You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 

    B

    Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 

    C

    Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    D

    Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    While installing a new IBM System Storage DS5100 into a customer’s data center， it is discoveredthat the customer does not have enough available Fibre Channel ports on their switches. Which ofthe following should have been used to avoid this situation？（）
    A

    IBM DS5000 Cabling Tool

    B

    IBM e-Configurator Tool

    C

    IBM Pre-Installation TDA Checklist

    D

    IBM Standalone Solutions Configuration Tool


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）
    A

     The switch receives the FCoE frame and forwards it to another switch over its VE port.

    B

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.

    C

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.

    D

     The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）
    A

    4

    B

    3

    C

    2

    D

    8


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）
    A

    VLAN

    B

    zoning

    C

    trunking

    D

    LUN masking


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A customer has a Fibre Channel switch residing in a configuration where both production and test data coexist. Which of the following is the simplest method for ensuring that the two types of data do not flow through the same port?（）

    • A、VLAN
    • B、zoning
    • C、trunking
    • D、LUN masking

    正确答案:B

  • 第14题：

    A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）

    • A、operator training
    • B、cache size of the two clusters
    • C、fibre bandwidth capability between the sites
    • D、number of stacked tape drives attached to each cluster

    正确答案:C

  • 第15题：

    A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

    • A、Dual power supplies.
    • B、Twice the amount of disk.
    • C、Two dual-port LHEA adapters.
    • D、Two dual-port fibre channel adapters.

    正确答案:A

  • 第16题：

    An insurance provider maintains a claims database where claims adjusters are adding new claims and updating existing claims everyday.  In the evening， a batch process is run to analyze data entered throughout the day.  To reduce costs， a shared storage solution is being considered.  Which of the following questions should the consultant ask to select the best performing storage configuration that meets their budget requirements？（）

    • A、What database is being used？
    • B、Which client operating systems will access the database？
    • C、Which vendor’s Fibre Channel switch do they prefer？
    • D、What volume of data is analyzed each evening？

    正确答案:D

  • 第17题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第18题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
    • D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    正确答案:C

  • 第19题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）
    A

    Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch

    B

    Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch

    C

    Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    Refer to the exhibit.Switch-1 needs to send data to a host with a MAC address of 00b0.d056.efa4.What will Switch-1 do with this data?（）
    A

    switch-1 will drop the data because it dose not have an entry for that MAC address

    B

    switch-1 will flood the data out all of its port from which the data originated

    C

    switch-1 will forward the data to its default gateway

    D

    tch-1 will send an ARP request out all its ports except the port from which the data originated


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    A customer has two locations that host their pSeries servers.  Traffic is being routed through the public Internet.  The customer needs to exchange confidential financial data between the servers.  Which of the following solutions should the pSeries technical specialist propose to the customer to secure the data？（）
    A

    A DCE domain

    B

    A Kerberos domain

    C

    A PPP tunnel between the servers

    D

    An IPSEC tunnel between the servers


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）
    A

    Configure 2CFFh combination fibre channel / gigabit Ethernet adapters

    B

    Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter

    C

    Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    D

    Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Which of the following is the correct configuration for a RAID 5 array?（）
    A

    A two disk set with one data strip

    B

    A three disk set with two data strips and a parity strip

    C

    A two disk set with two data strips

    D

    A four disk set with two sets of data strips


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    An insurance provider maintains a claims database where claims adjusters are adding new claims and updating existing claims everyday.  In the evening， a batch process is run to analyze data entered throughout the day.  To reduce costs， a shared storage solution is being considered.  Which of the following questions should the consultant ask to select the best performing storage configuration that meets their budget requirements？（）
    A

    What database is being used？

    B

    Which client operating systems will access the database？

    C

    Which vendor’s Fibre Channel switch do they prefer？

    D

    What volume of data is analyzed each evening？


    正确答案： B
    解析： 暂无解析

相关内容