mkvdev -dev useful_scripts -vadapter vhost0; loadopt -vdev vtopt0
mkvdev -optical useful_scripts -vadapter vhost0; loadopt -vdev vtopt0
mkvdev -fbo -vadapter vhost0; loadopt -disk useful_scripts -vtd vtopt0
mkvdev -type fbo -vadapter vhost0; loadopt -fbo useful_scripts -vtd vtopt0
第1题:
After rebuilding the list of virtual devices used by the VIO server using the "cfgdev" command, which command would be run to verify that a newly configured virtual SCSI adapter is available?()
第2题:
While configuring a new adapter using cfgmgr, an administrator receives a warning message indicating that some device packages are not installed. Additionally, the adapter displays in the Defined state. Which command will resolve the issue and make the adapter available?()
第3题:
An administrator is trying to diagnose as to why a new VIO client (vio_client1) cannot see an allocated disk (hdisk4) from a VIO server (VIOS-A). The client virtual SCSI adapter has a slot ID of 5 and the corresponding VIO server virtual SCSI adapter has a slot ID of 3. The administrator checks the virtual SCSI configuration from the HMC using the following lshwres command. lshwres –r virtualio --rsubtype scsi -m 9117-570*65ABCDE --level lpar -F / lpar_name,slot_num,remote_lpar_name,remote_slot_num,backing_device VIOS A,5,vio_client2,2,hdisk3 VIOS-A,4,vio_client1,4,hdisk4 VIOS-A,3,vio_client1,6,hdisk5 VIOS-A,2,vio_client3,2,hdisk6 vio_client2,2,VIOS-A,5,hdisk0 vio_client1,4,VIOS-A,4,hdisk0 vio_client1,5,VIOS-A,3,null vio_client3,2,VIOS-A,2,hdisk0 From the output above, what is the most likely reason why the client cannot see the mapped storage?()
第4题:
A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical adapter, ent0. Which of the following commands should be used to configure the Shared Ethernet Adapter?()
第5题:
You execute the following command to perform a backup by using Recovery Manager (RMAN): RMAN> run {allocate channel c1 type sbt; backup datafile 1; } The command errors out. A part of the error message is as follows: RMAN/x7f03009: failure of allocate command on c1 channel ORA/x7f19554: error allocating device, device type: SBT_TAPE, device name: What could explain why the statement failed?()
第6题:
You have the Web Server (IIS) role installed on a server that runs Windows Server 2008. You create a Web site named contoso.com. You copy an application named WebContent to the server. You need to enable the WebContent application on the Web site. What should you do?()
第7题:
Run cfgdev on the VIO server and re-run the mkvdev command.
Run chdev -a sea_enable=yes on the physical Ethernet adapter.
Remove and re-add the virtual Ethernet adapter.
Remove the IP address from the physical adapter and re-run the mkvdev command.
第8题:
mkvdev -lnagg ent0,ent1
mkdev -lnagg -d ent0,ent1
mkvdev -t etherchannel -a ent0,ent1
mkdev -c adapter -s pseudo -t etherchannel ent0,ent1
第9题:
lspv -pv hdisk2
lsattr -El hdisk2
lsdev -dev hdisk2 -attr
lspath -dev hdisk2 -attr
第10题:
At the command prompt on the server, run the appcmd add site command.
At the command prompt on the server, run the appcmd add vdir command.
Select the Web site from the Internet Information Services (IIS) Manager console. Select Add Application.
Select the Web site from the Internet Information Services (IIS) Manager console. Select Add Virtual Directory.
第11题:
NPIV presents Virtual HBA addresses and vendor specific information for disk and tape devices.vSCSI presents generic disk and tape device interfaces.
NPIV presents generic disk and tape device interfaces on virtual HBA addresses.vSCSI presents HBA addresses as SCSI with vendor specific information for disk and tape devices.
NPIV presents HBA addresses and vendor specific device information directly to the client partition.vSCSI presents vendor specific disk information and generic tape device interfaces through VIO server.
NPIV presents virtual HBA addresses with generic device information for SCSI based disk and tape devices.vSCSI presents vendor specific information for disk and tape device devices attached via SCSI hardware interfaces.
第12题:
lscfg -vps
prtconf -c
lparstat -i
lsdev -C -c processor
第13题:
From the information below, what command would the administrator run to allocate the file backed optical device, named useful_scripts, to virtual SCSI adapter vhost0?()
第14题:
The administrator would like to verify that hdisk2 has the correct reserve policy set. What IOS command should the administrator run?()
第15题:
An administrator trying to restore a backup from tape encounters read errors. The administrator suspects that it could be an issue with the block device. What is the appropriate method to resolve this issue?()
第16题:
Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run, the following method error is returned: /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem?()
第17题:
Your network contains a server named Server1 that runs Windows Server 2003 Service Pack (SP2). You install a new network adapter on Server1. You need to view the media access control (MAC) address for the new network adapter. What should you do? ()
第18题:
lsdev -virtual
lsdev -Cs scsi
lscfg -vl
lsdev -adapter
第19题:
mkvdev -dev useful_scripts -vadapter vhost0; loadopt -vdev vtopt0
mkvdev -optical useful_scripts -vadapter vhost0; loadopt -vdev vtopt0
mkvdev -fbo -vadapter vhost0; loadopt -disk useful_scripts -vtd vtopt0
mkvdev -type fbo -vadapter vhost0; loadopt -fbo useful_scripts -vtd vtopt0
第20题:
lspv -pv hdisk2
lsattr -El hdisk2
lsdev -dev hdisk2 -attr
lspath -dev hdisk2 -attr
第21题:
shutdown -Fr
cfgmgr -i
mkdev -l
mknode /dev/
第22题:
sbt is not a valid device type.
Media Management Library was not loaded.
The sbt device cannot be used for data file backups.
No path was defined in the ALLOCATE CHANNEL command.
The channel is currently being used by another RMAN session.
第23题:
shutdown -Fr
cfgmgr -i <lpp_source>
mkdev -l <device_name>
mknode /dev/<device_name>
第24题:
The hard disk has been inccorectly mapped on the VIO server.
The hard disk has been incorrectly addressed on the VIO client.
The client SCSI adapter has been mapped to the incorrect server SCSI adapter.
The server SCSI adapter has been mapped to the incorrect client server adapter.