itgle.com

单选题When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）AHA ModeBTrunk priorityCControl ChannelDDefault VLAN ID

题目
单选题
When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）
A

 HA Mode

B

 Trunk priority

C

 Control Channel

D

 Default VLAN ID

相似考题

1.A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server.Which limitation must be considered when planning the system configuration?（）A.A VIO server requires a dedicated LHEA port.B.There is a limit of 32 LPARs per virtual LAN.C.Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.D.Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

2.Which of the following options applies to virtual Ethernet devices（）A、A virtual Ethernet adapter can only connect to other partitions within the same system.B、A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.C、A partition can support an unlimited number of virtual Ethernet devices.D、A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the "trunk flag" set

3. A customer has a requirement to eliminate single points of failure for an application.  They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）A、Etherchannel and trunkingB、Network Interface Backup and EtherchannelC、Shared Ethernet Adapter （SEA） Failover and EtherchannelD、Network Interface Backup and Shared Ethernet Adapter failover

4. A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）A、ImplementPowerHA SystemMirror on both VIO servers.B、ConfigureEtherchannel between the client LPARs and the two VIO serversC、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.

更多“单选题When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）A  HA ModeB  Trunk priorityC  Control ChannelD  Default VLAN ID”相关问题

  • 第1题：

    Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）

    • A、Have one VIO server with striped disks for all LPARs
    • B、Have one VIO server with mirrored disks for all LPARs
    • C、Have two VIO servers with each LPAR accessing both VIO servers
    • D、Have two VIO servers with each LPAR accessing a different VIO server

    正确答案:C

  • 第2题：

    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）

    • A、Implement PowerHA SystemMirror on both VIO servers.
    • B、Configure Etherchannel between the client LPARs and the two VIO servers.
    • C、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the  network.
    • D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.

    正确答案:D

  • 第3题：

    A customer is configuring Live Partition Mobility on two POWER6-based servers，  Which of the following is required on both the source and the destination VIO servers for the mobile partition to participate in an active partition migration？（）

    • A、 IBM Director connection
    • B、 Dynamic LPAR Resource Manager （DLRM）
    • C、 Barrier Synchronization Register Device （BSR）
    • D、 Virtual Asynchronous Services Interface （VASI）

    正确答案:D

  • 第4题：

    Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）

    • A、Run cfgdev on the VIO server and re-run the mkvdev command.
    • B、Run chdev -a sea_enable=yes on the physical Ethernet adapter.
    • C、Remove and re-add the virtual Ethernet adapter.
    • D、Remove the IP address from the physical adapter and re-run the mkvdev command.

    正确答案:D

  • 第5题：

    When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）

    • A、 HA Mode
    • B、 Trunk priority
    • C、 Control Channel
    • D、 Default VLAN ID

    正确答案:B

  • 第6题：

    单选题
    Company.com has a VIO server with a configured virtual Ethernet adapter and a physical Ethernet adapter with an IP address on their local public network. They want to re-configure the physical Ethernet adapter as Shared Ethernet Adapter. When the mkvdev command is run， the following method error is returned： /usr/lib/methods/cfgsea . Which of the following will most likely resolve the problem？（）
    A

    Run cfgdev on the VIO server and re-run the mkvdev command.

    B

    Run chdev -a sea_enable=yes on the physical Ethernet adapter.

    C

    Remove and re-add the virtual Ethernet adapter.

    D

    Remove the IP address from the physical adapter and re-run the mkvdev command.


    正确答案： D
    解析： 暂无解析

  • 第7题：

    单选题
    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）
    A

    Implement PowerHA SystemMirror on both VIO servers.

    B

    Configure Etherchannel between the client LPARs and the two VIO servers.

    C

    Configure Network Interface Backup between the two VIO servers and use each VIO server to access the  network.

    D

    Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）
    A

    A VIO server requires a dedicated LHEA port.

    B

    There is a limit of 32 LPARs per virtual LAN.

    C

    Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.

    D

    Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down.  Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）
    A

    Implement PowerHA SystemMirror on both VIO servers.

    B

    Configure Etherchannel between the client LPARs and the two VIO servers

    C

    Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.

    D

    Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    A customer has a requirement to eliminate single points of failure for an application.  They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）
    A

    Etherchannel and trunking

    B

    Network Interface Backup and Etherchannel

    C

    Shared Ethernet Adapter （SEA） Failover and Etherchannel

    D

    Network Interface Backup and Shared Ethernet Adapter failover


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A customer is configuring Live Partition Mobility on two POWER6-based servers，  Which of the following is required on both the source and the destination VIO servers for the mobile partition to participate in an active partition migration？（）
    A

     IBM Director connection

    B

     Dynamic LPAR Resource Manager （DLRM）

    C

     Barrier Synchronization Register Device （BSR）

    D

     Virtual Asynchronous Services Interface （VASI）


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    When configuring dual VIO servers to connect to SAN based disk in failover mode， what setting must be applied？ （）
    A

     algorithm = failover

    B

     algorithm = round_robin

    C

     reserve_policy = no_reserve

    D

     reserve_policy = single_path


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down.  Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）

    • A、Implement PowerHA SystemMirror on both VIO servers.
    • B、Configure Etherchannel between the client LPARs and the two VIO servers
    • C、Configure Network Interface Backup between the two VIO servers and use each VIO server to access the network.
    • D、Implement Shared Ethernet Adapter failover and have all client partitions access the network through the shared adapters.

    正确答案:C

  • 第14题：

    The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other.  Which feature within the system would provide this functionality？（）

    • A、 802.1Q
    • B、 Virtual switch
    • C、 Logical Host Ethernet （LHE） Adapter
    • D、 Shared Ethernet Adapter （SEA） Trunking

    正确答案:B

  • 第15题：

    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）

    • A、A VIO server requires a dedicated LHEA port.
    • B、There is a limit of 32 LPARs per virtual LAN.
    • C、Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.
    • D、Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

    正确答案:A

  • 第16题：

    Which of the following allows the user to have two separate Ethernet networks share the same network adapter？（）

    • A、VLAN tags
    • B、EtherChannel
    • C、Virtual Ethernet
    • D、Shared Ethernet Adapter

    正确答案:A

  • 第17题：

    When configuring dual VIO servers to connect to SAN based disk in failover mode， what setting must be applied？ （）

    • A、 algorithm = failover
    • B、 algorithm = round_robin
    • C、 reserve_policy = no_reserve
    • D、 reserve_policy = single_path

    正确答案:C

  • 第18题：

    单选题
    The administrator of a Power 595 server is required to concurrently host LPARs for two different customers. Both customers’ LPARs have the same VLAN ID and subnet range， but their traffic must be isolated from each other.  Which feature within the system would provide this functionality？（）
    A

     802.1Q

    B

     Virtual switch

    C

     Logical Host Ethernet （LHE） Adapter

    D

     Shared Ethernet Adapter （SEA） Trunking


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    Which of the following options applies to virtual Ethernet devices（）
    A

    A virtual Ethernet adapter can only connect to other partitions within the same system.

    B

    A virtual Ethernet  adapter needs  to be connected to an external VLAN  capable switch to be able to communicate with other partitions on the same system.

    C

    A partition can support an unlimited number of virtual Ethernet devices.

    D

    A virtual Ethernet adapter in the VIO Server that is part of a SEA should not have the trunk flag set


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    A system is being designed with many LPARs which will be clients of dual VIO Servers. The VIO Servers must be redundant so that, in the event of scheduled maintenance, the clients do not need to be shut down. Which of these strategies could be used to ensure that the client LPARs continue to be able to use the network in the event of a VIO Server being shut down?（）
    A

    ImplementPowerHA SystemMirror on both VIO servers.

    B

    ConfigureEtherchannel between the client LPARs and the two VIO servers

    C

    Configure Network Interface Backup between the two VIO servers and use each VIO server to access the  network.

    D

    Implement Shared Ethernet Adapter failover and have all client partitions access the network through the   shared adapters.


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    When configuring Shared Ethernet Adapter （SEA） failover between two VIO servers，  which of the following attributes must have a different value on both VIO servers？（）
    A

     HA Mode

    B

     Trunk priority

    C

     Control Channel

    D

     Default VLAN ID


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Best practices would have no single point of failure between mirrored resources. In setting up virtual, internal boot disks for two client LPARs, how would this be accomplished?（）
    A

    Have one VIO server with striped disks for all LPARs

    B

    Have one VIO server with mirrored disks for all LPARs

    C

    Have two VIO servers with each LPAR accessing both VIO servers

    D

    Have two VIO servers with each LPAR accessing a different VIO server


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    Company.com has two POWER5 servers. They want the two servers’ virtual Ethernets to appear on the same IP subnet. Which of the following will connect the client virtual Ethernet adapters to the physical Ethernet switch connecting the two servers？（）
    A

    Configure a Shared Ethernet Adapter on the Virtual I/O Server.

    B

    Use the same virtual LAN ID on each LPAR.

    C

    Set up IP routing through an LPAR on each system.

    D

    Set up an IP firewall through an LPAR on each system.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A technical specialist defined a virtual Ethernet ent2 on the VIO server that has a physical  adapter， ent0. Which of the following commands should be used to configure the Shared Ethernet  Adapter？（）
    A

    mkvdev -sea ent2 -vadapter ent0 -default ent0 -defaultid 1

    B

    mkdev -virtual ent0 -adapter ent3 -default en2 -defaultid 1

    C

    mkvdev -sea ent0 -vadapter ent2 -default ent2 -defaultid 1

    D

    mkvdev ent0 -sea -vadapter ent2 -default ent2 -defaultid 1


    正确答案： D
    解析： 暂无解析

相关内容