itgle.com

Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?()A. FWSM routes traffic between the VLANs.B. FWSM switches traffic between the VLANs.C. Transparent mode is often called bump-in-the-wire mode.D. Trans

题目
Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?()

A. FWSM routes traffic between the VLANs.

B. FWSM switches traffic between the VLANs.

C. Transparent mode is often called bump-in-the-wire mode.

D. Transparent mode firewall deployments are used most often in current designs.

E. Traffic routed between VLANs is subject to state tracking and other firewall configurable options.

相似考题

1.Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?()A.show ip ospfB.show ip ospf interfaceC.show ip ospf neighborD.show ip ospf databaseE.show ip ospf statisticsF.show running - config begin router ospf

2.Refer to the exhibit. OSPF is running throughout the network. You want to minimize the propagation of LSAs into and out of A rea 1. Which OSPF feature would best achieve this goal? ()A. stubB. totally stubbyC. NSSAD. totally NSSA

3.Refer to the exhibit. This network is running IS － IS. Router RTC is inside Cloud1. From the output on RTD, which two statement s are true?()A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packetsB.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLCC.The SNPA for RTE is the source data link address that is used to transmit frames to RTDD.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLCE.The NET for RTE will be 49.0150.0019.06b7.fd5f.00F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS

4.Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()A. traffic - share balancedB. distanceC. maximum- pathsD. default - networkE. variance

更多“Refer to the exhibit. Which two of these are characteristics of a firewall running in transparent mode?() ”相关问题

  • 第1题：

    Refer to the exhibit. Which two statement s are correct?()

    A. All the routes were redistributed into BGP from an IGP

    B. All the routes were originated by BGP with the network command

    C. All six routes will be installed in the routing table

    D. Four routes will be installed in the routing ta ble

    E. Two routes will be installed in the routing table


    参考答案：A, D

  • 第2题：

    Refer to the exhibit. When deploying an MSFC and an FWSM, which statement is correct?()

    A. Proper placement depends on the VLAN assignment.

    B. Place it outside the firewall.

    C. Place it inside the firewall to make design and management easier.

    D. Place it inside the firewall with multiple context modes connecting to all configured contexts.


    参考答案：A

  • 第3题：

    Refer to the exhibit. Which value will be configured for Default Gateway of the Local Area Connection?()

    A.10.0.0.0

    B.10.0.0.254

    C.192.223.129.0

    D.192.223.129.254


    参考答案：B

  • 第4题：

    Which three of the following descriptions are true about the firewall modes？ （）

    • A、 Transparent mode is layer 2.
    • B、 Routed mode is layer 3.
    • C、 Routed mode has 1 IP address.
    • D、 Transparent mode has 1 IP address.

    正确答案:A,B,D

  • 第5题：

    Which two statements correctly describe VTP？（）

    • A、Transparent mode always has a configuration revision number of 0.
    • B、Transparent mode cannot modify a VLAN database.
    • C、Client mode cannot forward received VTP advertisements.
    • D、Client mode synchronizes its VLAN database from VTP advertisements.
    • E、Server mode can synchronize across VTP domains.

    正确答案:A,D

  • 第6题：

    Which three statements about firewall modes are correct？ （）

    • A、 A firewall in routed mode has one IP address
    • B、 A firewall in transparent mode has one IP address
    • C、 In routed mode， the firewall is considered to be a Layer 2 dew
    • D、 In routed mode， the firewall is considered to be a Layer 3 device
    • E、 In transparent mode， the firewall is considered to be a Layer 2 device
    • F、 In transparent mode， the firewall is considered to be a Layer 3 device

    正确答案:A,D,E

  • 第7题：

    What is the encapsulation mode for MPLS running on Ethernet？（）

    • A、Packet mode
    • B、Frame mode
    • C、Transparent mode
    • D、Channel mode
    • E、Tunnel mode

    正确答案:B

  • 第8题：

    多选题
    Refer to the exhibit. Which two statements are correct？ （Choose two.）（）
    A

    All six routes will be installed in the routing table.

    B

    Two routes will be installed in the routing table.

    C

    Four routes will be installed in the routing table.

    D

    All the routes were redistributed into BGP from an IGP.

    E

    All the routes were originated by BGP with the network command.


    正确答案： C,B
    解析： 暂无解析

  • 第9题：

    单选题
    What is a virtual firewall？（）
    A

    another name for a firewall deployed in routed mode

    B

    another name for a firewall deployed in transparent mode

    C

    a separation of multiple firewall security contexts on a single firewall

    D

    a firewall that， when deployed in routed mode， can support up to 1000 VLANs per context

    E

    a firewall that has multiple contexts， all of which share the same policies （such as NAT and ACLs）


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    cisco公司的ASA防火墙在性能上已经比PIX防火墙有了很大提升，ASA防火墙一般可以工作在两种模式下:router模式和transparent模式。以下哪条命令可以让ASA防火墙工作于transparent模式，直接转发第二层的数据帧（）
    A

    ciscoasa(config)# firewall transparent

    B

    ciscoasa(config)# mode transparent

    C

    ciscoasa(config)# firewall mode transparent

    D

    ciscoasa(config)# transparent mode


    正确答案： A
    解析： 暂无解析

  • 第11题：

    多选题
    What are two characteristics of a switch that is configured as a VTP client？（）
    A

    if a switch that is configured to operate in client mode cannot access a VTP server，then the switch reverts to transparent mode.

    B

    The local vlan configuration is updated only when an update that has a higher configuration revision number is received.

    C

    Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.

    D

    When switches in vtp client mode are rebooted，they send a vtp advertisement request to the vtp servers.

    E

    Vtp client is the default vtp mode

    F

    On switches that are configured to operate in client mode ，vlans can be created，deleted，or renamed locally


    正确答案： B,C
    解析： 暂无解析

  • 第12题：

    单选题
    What is the most common mode for a firewall？（）
    A

     routed mode

    B

     context mode

    C

     bridged mode

    D

     transparent mode

    E

     full security mode


    正确答案： C
    解析： 暂无解析

  • 第13题：

    Which two characteristics are true of a firewall running in routed mode based on the following information?()

    A. FWSM routes traffic between the VLANs.

    B. FWSM switches traffic between the VLANs.

    C. Routed mode is often called bump-in-the-wire mode.

    D. Routed mode firewall deployments are used most often in current designs.


    参考答案：A, D

  • 第14题：

    What are two characteristics of a switch that is configured as a VTP client?()

    A.if a switch that is configured to operate in client mode cannot access a VTP server,then the switch reverts to transparent mode.

    B.The local vlan configuration is updated only when an update that has a higher configuration revision number is received.

    C.Vtp advertisements are not forwarded to neighboring switches that are configured in vtp transparent mode.

    D.When switches in vtp client mode are rebooted,they send a vtp advertisement request to the vtp servers.

    E.Vtp client is the default vtp mode

    F.On switches that are configured to operate in client mode ,vlans can be created,deleted,or renamed locally


    参考答案：B, D

  • 第15题：

    默认情况下，ASA防火墙是工作在router模式下，如果需要将防火墙从transparent模式更改为默认的router模式，以下哪条命令可以实现这个目的（）

    • A、ciscoasa（config）#no firewal ltransparent
    • B、ciscoasa（config）#firewall router
    • C、ciscoasa（config）#firewall mode router
    • D、ciscoasa（config）#no firewall mode transparent

    正确答案:A

  • 第16题：

    What is the most common mode for a firewall？（）

    • A、 routed mode
    • B、 context mode
    • C、 bridged mode
    • D、 transparent mode
    • E、 full security mode

    正确答案:A

  • 第17题：

    What is the traditional mode for a firewall？（）

    • A、 routed mode
    • B、 context mode
    • C、 bridged mode
    • D、 transparent mode
    • E、 full security mode

    正确答案:A

  • 第18题：

    What is a virtual firewall？（）

    • A、another name for a firewall deployed in routed mode
    • B、another name for a firewall deployed in transparent mode
    • C、a separation of multiple firewall security contexts on a single firewall
    • D、a firewall that， when deployed in routed mode， can support up to 1000 VLANs per context
    • E、a firewall that has multiple contexts， all of which share the same policies （such as NAT and ACLs）

    正确答案:C

  • 第19题：

    Which two of these correctly describe asymmetric routing and firewalls?（）

    • A、only operational in routed mode
    • B、only operational in transparent mode
    • C、only eight interfaces can belong to an asymmetric routing group
    • D、operational in both failover and non-failover configurations
    • E、only operational when the firewall has been configured for failover

    正确答案:C,D

  • 第20题：

    单选题
    What is the traditional mode for a firewall？（）
    A

     routed mode

    B

     context mode

    C

     bridged mode

    D

     transparent mode

    E

     full security mode


    正确答案： A
    解析： 暂无解析

  • 第21题：

    多选题
    Which three statements about firewall modes are correct？ （）
    A

    A firewall in routed mode has one IP address

    B

    A firewall in transparent mode has one IP address

    C

    In routed mode， the firewall is considered to be a Layer 2 dew

    D

    In routed mode， the firewall is considered to be a Layer 3 device

    E

    In transparent mode， the firewall is considered to be a Layer 2 device

    F

    In transparent mode， the firewall is considered to be a Layer 3 device


    正确答案： C,A
    解析： 暂无解析

  • 第22题：

    多选题
    Refer to the exhibit. Which two statements are correct？（）
    A

    All six routes will be installed in the routing table

    B

    Two routes will be installed in the routing table

    C

    Four routes will be installed in the routing table

    D

    All the routes were redistributed into BGP from an IGP

    E

    All the routes were originated by BGP with the network command


    正确答案： A,B
    解析： 暂无解析

  • 第23题：

    多选题
    Which two of these correctly describe asymmetric routing and firewalls?（）
    A

    only operational in routed mode

    B

    only operational in transparent mode

    C

    only eight interfaces can belong to an asymmetric routing group

    D

    operational in both failover and non-failover configurations

    E

    only operational when the firewall has been configured for failover


    正确答案： B,E
    解析： 暂无解析

相关内容