itgle.com

A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other serv

题目

A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）

A.OSPF

B.RIP

C.FSPF

D.VSANs

相似考题

1.An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs.For each given LPAR how should they add the PCI card to the LPAR profile?()A.Add the fibre channel card as hared?Add the fibre channel card as ?hared?B.Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?C.Add the fibre channel card as esired?Add the fibre channel card as ?esired?D.Add the fibre channel card as equired?Add the fibre channel card as ?equired?

2.In a Cisco Unified Computing System， where are SAN port channels connected to？（）A、 Only to Cisco Fibre Channel switchesB、 Only to Cisco Fibre Channel switches in NPIV modeC、 To any Fibre Channel switchD、 Directly to storage arraysE、 Only to Nexus Switches

3.What is the appliance port used to connect to in a Cisco Unified Computing System？（）A、 Fibre Channel storageB、 UCS C-Series serversC、 NFS storageD、 UCS chassisE、 Other fabric interconnect

4.A virtual storage area network (VSAN) is a collection of ports from a set of connected Fibre Channel switches, that form a virtual fabric. Which technology allows centralized storage services to be shared across different VSANs?（）A.IVRB.FSPFC.FICOND.SANTap

参考答案和解析
参考答案：C
更多“A Fibre Channel fabric (or Fibre Channel switched fabric, FC－SW) is a switched fabric of F ”相关问题

  • 第1题：

    A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）

    • A、 OSPF
    • B、 RIP
    • C、 FSPF
    • D、 VSANs

    正确答案:C

  • 第2题：

    A Fibre Channel fabric (or Fibre Channel switched fabric, FC-SW) is a switched fabric of Fibre Channel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning.Each fabric has a name server and provides other services. Higher redundancy over FC-AL, P2P.Which path selection protocol is used by Fibre Channel fabrics?（）

    • A、OSPF
    • B、RIP
    • C、FSPF
    • D、VSANs

    正确答案:C

  • 第3题：

    Which statement about Cisco Unified Fabric switches is correct？ （）   

    • A、 The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
    • B、 The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. 
    • C、 The Nexus 7000 Series Switches can support the NPIV mode of operation， but cannot function as a complete Fibre Channel Forwarder.
    • D、 The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
    • E、 The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

    正确答案:E

  • 第4题：

    Which two Fibre Channel features are not supported in Cisco Nexus 5500 and Nexus 5000 platforms？ （）

    • A、 port security
    • B、 fabric binding
    • C、 IVR
    • D、 port tracking
    • E、 FICON

    正确答案:C,E

  • 第5题：

    What types of host connectivity are available on the Storwize V7000?（）

    • A、Fibre Channel and SAS 
    • B、Fibre Channel and iSCSI 
    • C、Fibre Channel, iSCSI and SAS 
    • D、Fibre Channel, iSCSI and InfiniBand 

    正确答案:B

  • 第6题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter
    • D、Configure 1CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet  adapter

    正确答案:C

  • 第7题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第8题：

    A customer is deploying a new database on a PS701 Blade in a BladeCenter H, and requires redundant network and SAN adapters. Which configuration supports the customer requirement?（）

    • A、Configure 2 CFFh combination fibre channel / gigabit Ethernet adapters
    • B、Configure 1 CFFh 2-port fibre channel adapter and 1 CIOv 2-port gigabit Ethernet adapter
    • C、Configure 1 CIOv 2-port fibre channel adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter
    • D、Configure 1 CIOv 2-port gigabit Ethernet adapter and 1 CFFh combination fibre channel / gigabit Ethernet adapter

    正确答案:C

  • 第9题：

    单选题
    A virtual storage area network (VSAN) is a collection of ports from a set of connected Fibre Channel switches, that form a virtual fabric. Which technology allows centralized storage services to be shared across different VSANs?（）
    A

    IVR

    B

    FSPF

    C

    FICON

    D

    SANTap


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    In a Cisco Unified Computing System， where are SAN port channels connected to？（）
    A

     Only to Cisco Fibre Channel switches

    B

     Only to Cisco Fibre Channel switches in NPIV mode

    C

     To any Fibre Channel switch

    D

     Directly to storage arrays

    E

     Only to Nexus Switches


    正确答案： E
    解析： 暂无解析

  • 第11题：

    单选题
    Which protocol does the UCS Fabric Interconnect support on port channel uplinks?（）
    A

    LACP

    B

    PAgP

    C

    MCPC


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    What is the appliance port used to connect to in a Cisco Unified Computing System？（）
    A

     Fibre Channel storage

    B

     UCS C-Series servers

    C

     NFS storage

    D

     UCS chassis

    E

     Other fabric interconnect


    正确答案： E
    解析： 暂无解析

  • 第13题：

    Which command is used to determine if a host has logged in to the Fibre Channel fabric？ （）

    • A、 show flogi database
    • B、 show system fc login
    • C、 show npv flogi-table
    • D、 show npv fcns database
    • E、 show interface vfc X flogi
    • F、 show interface flogi

    正确答案:C

  • 第14题：

    Which protocol does the UCS Fabric Interconnect support on port channel uplinks?（）

    • A、LACP
    • B、PAgP
    • C、MCPC

    正确答案:A

  • 第15题：

    An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）

    • A、 A· unique vEthernet interface will be created on Fabric A· and Fabric B·
    • B、 A·  vEthernet interface will be created only on Fabric A·
    • C、 A· vEthernet interface will be created on Fabric A·， and move across to Fabric B· in the event of failure
    • D、 Fabric B· will learn the vEthernet interface from Fabric A· through a GARP E· The same vEthernet interface will be created on Fabric A· and Fabric B·

    正确答案:A

  • 第16题：

    Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）

    • A、 The fabric interconnects must be in end-host mode.
    • B、 A pin group must be configured on the server tab in Cisco UCS Manager.
    • C、 In the service profile for Server 1， vNIC 1 must be explicitly assigned to a pin group.
    • D、 Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load-balancing algorithm.
    • E、 Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned， but not both.

    正确答案:A,C

  • 第17题：

    A company wants a solution to consolidate their storage using the DS4000 series and implement a disaster recovery solution across two data centers linked by fibre to duplicate the production environment.The customer requires a solution with the least amount of system administration.  Which configuration would provide the best solution？（）

    • A、Implement one DS4400 at each location connected to the fibre link and use Remote Volume Mirror （RVM）.
    • B、Implement a DS4400 at each location using FlashCopy option and use host based replication to synchronize the sites.
    • C、Implement a switched fabric using redundant SAN switches with a DS4300 using RVM option at each location.
    • D、Implement a switched fabric using SAN switches connected via ISL with a DS4300 using RVM option at each location.

    正确答案:D

  • 第18题：

    An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile?（）

    • A、Add the fibre channel card as hared?Add the fibre channel card as ?hared?
    • B、Add the fibre channel card as irtual?Add the fibre channel card as ?irtual?
    • C、Add the fibre channel card as esired?Add the fibre channel card as ?esired?
    • D、Add the fibre channel card as equired?Add the fibre channel card as ?equired?

    正确答案:C

  • 第19题：

    A customer needs to deploy a SAN and connect nine servers running a mix of Windows and Linux.  They currently need 12TB， but their growth requirements will be tripled in the near future.  They will also consolidate 18 legacy Windows servers onto one system using virtualization software and connect that server to the storage solution.  A DS4000 series backup solution needs to be included in the design.  Which of the following solutions will satisfy these requirements？（）

    • A、DS4300 with a switched fabric and an x445 running VMWare ESX server
    • B、DS4500 with a switched fabric and an x445 running VMWare ESX server
    • C、DS4300 SAN with a switched fabric and an x445 running Microsoft Virtual Server
    • D、DS4400 Server with an x445 running Virtuozzo VPS

    正确答案:B

  • 第20题：

    单选题
    A Fibre Channel fabric （or Fibre Channel switched fabric， FC-SW） is a switched fabric of FibreChannel devices enabled by a Fibre Channel switch. Fabrics are normally subdivided by Fibre Channel zoning. Each fabric has a name server and provides other services. Higher redundancy over FC-AL，P2P.Which path selection protocol is used by Fibre Channel fabrics？（）
    A

     OSPF

    B

     RIP

    C

     FSPF

    D

     VSANs


    正确答案： D
    解析： 暂无解析

  • 第21题：

    单选题
    Which command is used to determine if a host has logged in to the Fibre Channel fabric？ （）
    A

     show flogi database

    B

     show system fc login

    C

     show npv flogi-table

    D

     show npv fcns database

    E

     show interface vfc X flogi

    F

     show interface flogi


    正确答案： E
    解析： 暂无解析

  • 第22题：

    单选题
    Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host？（）
    A

     The switch receives the FCoE frame and forwards it to another switch over its VE port.

    B

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.

    C

     The switch receives the FCoE frame， deapsulates it， and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.

    D

     The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）
    A

    Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch

    B

    Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch

    C

    Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    An administrator creates a vNIC and assigns it to Fabric A with the fabric failover feature enabled. Which statement is true？（）
    A

     A· unique vEthernet interface will be created on Fabric A· and Fabric B·

    B

     A·  vEthernet interface will be created only on Fabric A·

    C

     A· vEthernet interface will be created on Fabric A·， and move across to Fabric B· in the event of failure

    D

     Fabric B· will learn the vEthernet interface from Fabric A· through a GARP E· The same vEthernet interface will be created on Fabric A· and Fabric B·


    正确答案： D
    解析： 暂无解析

相关内容