itgle.com

You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs each interface is using.Which CLI command displays this information?()A.AB.BC.CD.D

题目
You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs each interface is using.Which CLI command displays this information?()

A.A

B.B

C.C

D.D

相似考题

1.If you don’t like to swim, you _____as well stay at home.A)should B)may C)can D)would

2.AVIOserverhastwofibrechanneladapters,fcs0fcs1,attachedforredundantaccesstoastoragesubsystem.Iffcs1hasfailed,whatisthecorrectproceduretorectifythisproblem?()A.Using’diagmenu’command，setfcs1toDefined.B.Using’oem_setup_env’and’rmdev-R’commands，setfcs1adapterto’Defined’state.C.Using’diagmenu’command，setthefcs1statetoDefinedD.Using’oem_setup_env’and’rmdev-dl’commands，setthestateoffcs1toDefined

3.SwitchA是未做过任何配置的二层交换机。SwitchA上配置管理VLAN为VLAN100。SwitchA的以太网端口E0／1为Trunk端口,连接到SwitchB。同时SwitchB提供DHCPServer功能。要求SwitchA的VLAN接口100动态获取IP地址。要实现组网需求,需要对端口、VLAN和VLAN接口分别做相应配置。下列步骤中,不完整的是()。A.E0/1端口设置：[SwitchA-Ethernet0/1]port link-type trunkB.创建VLAN100：[SwitchA]vlan 100C.创建VLAN100的接口：[SwitchA]interface Vlan-interface 100D.为VLAN接口100配置IP地址：[SwitchA-Vlan-interface100]ip address dhcp-alloc

4."You _________ finish your homework before the dinner." said mother.A.shouldB.have toC.mustD.would

更多“You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs each interface is using.Which CLI command displays this information?() ”相关问题

  • 第1题：

    VLAN10中仅包含端口E0／5,VLAN10的接口为Vlan－interface10。要想关闭VLAN10的接口,其方法有()。

    A.[SwitchA]vlan 10

    [SwitchA-vlan2]undo port Ethernet 0/5

    B.[SwitchA]port Ethernet 0/5

    [SwitchA-Ethernet0/5]shutdown

    C.[SwitchA-Vlan-interface10]shutdown

    D.以上三种都可以


    答案：D

  • 第2题：

    “You ____ have a wrong number,” she said. “There’s no one of that name here.”

    A. need

    B. can

    C. must

    D. would


    正确答案：C
    解析：must have意思是肯定有什么，依题意可得，答案是C。

  • 第3题：

    在三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    A

  • 第4题：

    Routers R1 and R2, OSPF neighbors in area 0 over their Fa0/0 interfaces (respectively), currently both successfully use OSPF MD5 authentication. The OSPF configuration includes the area 0 authentication command under the router ospf 1 command.Which of the following commands must have been configur ed on R1‘s Fa0/0 interface?（）

    A. ip ospf authentication null

    B. ip ospf authentication message - digest

    C. ip ospf authentication -key whatever- it - is

    D. ip ospf message - digest - key 1 md5 whatever - it - is

    E. ip ospf md5 1 key whatever - it - is


    参考答案：B, D

  • 第5题：

    三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    [SW1-Vlan-interface10]ip address 10.0.0.1 24

  • 第6题：

    2、在三层交换机上为VLAN 10配置10.0.0.1/24的IP地址，所用命令为（）。

    A．[SW1-Vlan-interface10]ip address 10.0.0.1 24

    B．[SW1] ip address 10.0.0.1 24

    C．[SW1-Ethernet0/4/2] ip address 10.0.0.1 24

    D．[SW1-Vlan-interface10]ip address 10.0.0.1


    A

相关内容