itgle.com

You want the redistributed EIGRP AS 10 routes to have an administrative distance of 121 when they appear as RIP routes in the routing table of A1.Which command should you use on a router to accomplish this goal?（）A. redistribute eigrp 10 metric 121B. redi

题目

You want the redistributed EIGRP AS 10 routes to have an administrative distance of 121 when they appear as RIP routes in the routing table of A1.Which command should you use on a router to accomplish this goal?（）

A. redistribute eigrp 10 metric 121

B. redistribute rip metric 121

C. default - metric 121

D. distance 121 10.1.1.6 0.0.0.0

相似考题

1.A network includes a RIPv2 domain, an EIGRP domain, and an OSPF domain. Each pair of routing domains has multiple routers redistributing routes between the p air of domains. The design requires that the redistribution configuration avoid matching based on prefix/length because of the trouble in maintaining such configurations.Which one of the following tools can be used in all three routing domains to attem pt to prevent domain loops?（）A. Setting route tagsB. Setting the default administrative distance differently for internal and external routesC. Setting administrative distance differently per routeD. Setting metrics much higher for all ext ernal routes than for all internal routes

2.A network administrator is troubleshooting a redistribution of RIP routes into OSPF. Given the exhibited configuration commands, which statement is true? ()A. Redistributed ro utes will be tagged as external type 1 (E1) with a metric of 30.B. Redistributed routes will be tagged as external type 2 (E2) with a metric of 20.C. Redistributed routes will maintain their original RIP routing metric.D. Redistributed routes will ha ve a default metric of 0 and will be treated as unreachable and not advertised.E. Redistributed routes will have a default metric of 0 but will not be treated as reachable and will be advertised.

3.Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）A. The no auto - summary command needs to be added under router eigrp 1B. The subnets keyword was not included in the redistribute command under router ospf 1C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router AD. The default - information originate command needs to be added under router ospf 1E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF

4.Refer to the exhibit. Will redistribute d RIP routes from OSPF Area 2 be allowed in Area 1? ()A. RIP routes will be allowed in Area 1 only if they are first redistributed into EIGRP.B. Because NSSA will discard type 7 LSAs, redistributed RIP routes will not be allowed in Area 1.C. Redistrib uted RIP routes will be allowed in Area 1 because they will be changed into type 5 LSAs in Area 0 and passed on into Area 1.D. Redistributed RIP routes will be allowed in Area 1 because they will be changed into type 7 LSAs in Area 0 and passed on into Area 1.E. Because Area 1 is an NSSA, redistributed RIP routes will not be allowed.

更多“You want the redistributed EIGRP AS 10 routes to have an administrative distance of 121 wh ”相关问题

  • 第1题：

    Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()

    A. traffic - share balanced

    B. distance

    C. maximum- paths

    D. default - network

    E. variance


    参考答案：C, E

  • 第2题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border router is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing OSPF routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute OSPF command


    参考答案：D

  • 第3题：

    Which statement about a none zero value for the load metric (k2) for EIGRP is true?()

    A. A change in the load on an interface will cause EIGRP to recalculate the routing metrics and send a corresponding update out to each of its neighbors.

    B. EIGRP calculates interface load as a 5 - minute exponentially weighted average that is updated every 5 minutes.

    C. EIGRP considers the load of an interface only when sending an update for some other reason.

    D. A change in the load on an interface will cause EIGRP to recalculate and update the administrative distance for all routes learne d on that interface.


    参考答案：C

  • 第4题：

    After DUAL calculations, a router has identified a successor route, but no routes have qualified as a feasible successor. In the event that the current successor goes down, what process will EIGRP use in the selection of a new successor?（）

    A. EIGRP will automatically use the route with the lowest advertised distance (AD) .

    B. The route will transition to the active state.

    C. The route will transition to the passive state.

    D. EIGRP will find the interface with the lowest MAC address.

    E. EIGRP will automatically use the route with the lowest feasible distance (FD).


    参考答案：B

  • 第5题：

    Router R1 has a connected route for 10.1.1.0/24 off interface Fa0/0. Interface Fa0/0 has been enabled for OSPF due to a router ospf 1 and network 10.0.0.0 0.0.0.255 area 0 command. R1 also has EIGRP configured, with the redistribute ospf 1 metric 1000 100 10 1 1500 command configured under EIGRP. Which one of the following is true?（）

    • A、R1 will not redistribute 10.1.1.0/24 into EIGRP, because R1 knows it as a connected route and not as an OSPF route.
    • B、For any OS PF routes redistributed into EIGRP, the metric components includea value equivalent to 1 Mbps of bandwidth.
    • C、For any OSPF routes redistributed into EIGRP, the metric components include a value equivalent to 100 microseconds of delay.
    • D、No subnets of network 10.0.0.0 will be redistributed due to the omission of the subnets parameter.

    正确答案:B

  • 第6题：

    Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？ （）

    • A、EIGRP will not be accepted when configured on the actual RIPv2 routers.
    • B、OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.
    • C、OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.
    • D、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.
    • E、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.
    • F、OSPF database will have RIPv2 routes.

    正确答案:B,E

  • 第7题：

    If a metric is not specified for routes that are redistributed into OSPF， the default metric that is assigned to the routes is 20， except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes？（）

    • A、0
    • B、1
    • C、10
    • D、200

    正确答案:B

  • 第8题：

    A router leams about a remote network from EIGRP.OSPF. and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network?（）

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The route will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第9题：

    EIGRP performs automatic summarization at network boundaries. What administrative distance is given to these EIGRP summary routes?（）

    • A、1
    • B、90
    • C、95
    • D、0
    • E、5
    • F、170
    • G、255
    • H、None of the other alternatives apply

    正确答案:E

  • 第10题：

    单选题
    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）
    A

    The border router is using a proper seed metric for OSPF

    B

    The border router is using a proper seed metric for EIGRP

    C

    The administrative distance is set for OSPF and EIGRP

    D

    The missing OSPF routes are present in the routing  table of the border router

    E

    The subnet keyword on the border router in the redistribute OSPF command


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？（）
    A

    EIGRP will not be accepted when configured on the actual RIPv2 routers.

    B

    OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.

    C

    OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.

    D

    RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.

    E

    RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.

    F

    OSPF database will have RIPv2 routes.


    正确答案： D,E
    解析： 暂无解析

  • 第12题：

    单选题
    If a metric is not specified for routes that are redistributed into OSPF， the default metric that is assigned to the routes is 20， except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes？（）
    A

    0

    B

    1

    C

    10

    D

    200


    正确答案： B
    解析： 暂无解析

  • 第13题：

    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes.Which two things should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border ro uter is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing EIGRP routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute EIG RP command


    参考答案：D, E

  • 第14题：

    Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

    A. Redistribution must be enabled mutually (in both directions) to work correctly.

    B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

    C. Default metrics are not configured under EIGRP.

    D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.


    参考答案：C

  • 第15题：

    EIGRP performs automatic summarization at network boundaries.What administrative distance is given to these EIGRP summary routes?()

    A.1

    B.90

    C.95

    D.0

    E.5

    F.170

    G.255

    H.None of the other alternatives apply


    参考答案：E

  • 第16题：

    Part of the routing table of router PG1 is displayed below:From analyzing the above command output,what is the administrative distance of the external EIGRP routes()

    A.24

    B.32

    C.90

    D.170

    E.27316

    F.None of the other alternatives apply


    参考答案：D

  • 第17题：

    A router learns about a remote network from EIGRP, OSPF, and a static route. Assuming all routing protocols are using their default administrative distance, which route will the router use to forward data to the remote network（）。

    • A、The router will use the static route.
    • B、The router will use the OSPF route.
    • C、The router will use the EIGRP route.
    • D、The router will load balance and use all three routes.

    正确答案:A

  • 第18题：

    After DUAL calculations, a router has identified a successor route, but no routes have qualified as a feasible successor. In the event that the current successor goes down, what process will EIGRP use in the selection of a new successor?（）

    • A、EIGRP will automatically use the route with the lowest advertised distance (AD) .
    • B、The route will transition to the active state.
    • C、The route will transition to the passive state.
    • D、EIGRP will find the interface with the lowest MAC address.
    • E、EIGRP will automatically use the route with the lowest feasible distance (FD).

    正确答案:B

  • 第19题：

    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border ro uter is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing EIGRP routes are present in the routing table of the border router
    • E、The subnet keyword on the border router in the redistribute EIG RP command

    正确答案:D,E

  • 第20题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border router is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing OSPF routes are present in the routing  table of the border router
    • E、The subnet keyword on the border router in the redistribute OSPF command

    正确答案:D

  • 第21题：

    单选题
    A network includes a RIPv2 domain, an EIGRP domain, and an OSPF domain. Each pair of routing domains has multiple routers redistributing routes between the p air of domains. The design requires that the redistribution configuration avoid matching based on prefix/length because of the trouble in maintaining such configurations. Which one of the following tools can be used in all three routing domains to attem pt to prevent domain loops?（）
    A

    Setting route tags

    B

    Setting the default administrative distance differently for internal and external routes

    C

    Setting administrative distance differently per route

    D

    Setting metrics much higher for all ext ernal routes than for all internal routes


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    EIGRP performs automatic summarization at network boundaries. What administrative distance is given to these EIGRP summary routes?（）
    A

    1

    B

    90

    C

    95

    D

    0

    E

    5

    F

    170

    G

    255

    H

    None of the other alternatives apply


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    If a metric is not specified for routes that are redistributed into OSPF, the defaul t metric that is assigned to the routes is 20, except for redistributed BGP routes. What is the metric that is assigned to redistributed BGP routes?（）
    A

    200

    B

    0

    C

    1

    D

    10


    正确答案： B
    解析： 暂无解析

相关内容