itgle.com

To make OSPF area 4 totally stubby, the following command was issued on the ABR in router configuration mode: area 4 stub.Which two things need to be done to finish making area 4 a totally stubby area?()A. Apply the area 4 stub command to all routers in t

题目

To make OSPF area 4 totally stubby, the following command was issued on the ABR in router configuration mode: area 4 stub.Which two things need to be done to finish making area 4 a totally stubby area?()

A. Apply the area 4 stub command to all routers in the area

B. On the ABR, use the area 4 stub command with the no - summary keyword

C. On the ABR, specify a default cost for the area with the area default - cost command

D. On the ABR, use the default - information originate command to inject a default route into area 4

E. Use the auto - cost command on each router in the area to automatically determine the cost to other OSPF areas


相似考题
参考答案和解析
参考答案:A, B
更多“To make OSPF area 4 totally stubby, the following command was issued on the ABR in router ”相关问题
  • 第1题:

    Refer to the exhibit. What is the effect of the OSPF configuration on router B?()

    A. All interfaces will be in area 0

    B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1

    C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2

    D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2


    参考答案:D

  • 第2题:

    Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?()

    A. On the ABR router ospf 10 area 3 stub

    B. On all Area 3 routers router ospf 10 area 3 stub

    C. On all Area 3 routers router ospf 10 area 3 stub no - summary

    D. On the ABR router ospf 10 area 3 nssa

    E. On the ABR rou ter ospf 10 area 3 stub no - summary


    参考答案:E

  • 第3题:

    You are troubleshooting an OSPF problem where external routes are not showing up in the OSPF database. Which two options a re valid checks that should be performed first to verify proper OSPF operation?()

    • A、Are the ASBRs trying to redistribute the external routes into a totally stubby area?
    • B、Are the ABRs configured with stubby areas?
    • C、Is the subnets keyword being used with the redistribution command?
    • D、Is backbone area (area 0) contiguous?
    • E、Is the CPU utilization of the routers high?

    正确答案:A,C

  • 第4题:

    ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?()

    • A、Stub
    • B、Totally stubby
    • C、NSSA
    • D、Totally NSSA

    正确答案:B

  • 第5题:

    A verification plan shows a network diagram with branch office Routers B1 through B100, plus two ABRs, ABR1, and ABR2, all in area 100. The branches connect to the ABRs using Frame Relay point - to - point subinterfaces. The verification plan lists the output of the show i p ospf database summary 10.100.0.0 command on a router B1, one of the branches. Which of the following is true regarding the output that could be listed for this command?()

    • A、The output lists nothing unless 10.100.0.0 has been configured as a summary rou te using the area range command.
    • B、If 10.100.0.0 is a subnet in area 0, the output lists one Type 3 LSA, specifically the LSA with the lower metric when comparing ABR1's and ABR2's LSA for 10.100.0.0.
    • C、If 10.100.0.0 is a subnet in area 0, the output lists two Type 3 LSAs, one each created by BR1 and ABR2.
    • D、None, because the Type 3 LSAs would exist only in the ABR's LSDBs.

    正确答案:C

  • 第6题:

    Which statement is true about the command ipv6 ospf 1 area 0?()

    • A、It must be issued before the network command to enable the OSPF pr ocess for IPv6.
    • B、It must be issued after the network command to enable the OSPF process for IPv6.
    • C、It must be issued in router global configuration mode to enable the OSPF process for IPv6.
    • D、It must be issued in interface configuration mode to ena ble the OSPF process for IPv6.

    正确答案:D

  • 第7题:

    Which of the following is true about an OSPF area border router (ABR)?()

    • A、The ABR must have multiple interfaces connected to the backbone areA
    • B、An ABR is a router with two interfaces, each connected to a different nonbackbone areA
    • C、The only requirement to be considered an  ABR is at least one interface connected to the backbone areA
    • D、An ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA

    正确答案:D

  • 第8题:

    单选题
    ABR R1 has been configured with an area 1 stub no - summary command. Which stubby area type is area 1?()
    A

    Stub

    B

    Totally stubby

    C

    NSSA

    D

    Totally NSSA


    正确答案: D
    解析: 暂无解析

  • 第9题:

    多选题
    To make OSPF area 4 totally stubby, the following command was issued on the ABR in router configuration mode: area 4 stub.Which two things need to be done to finish making area 4 a totally stubby area?()
    A

    Apply the area 4  stub command to all routers in the area

    B

    On the ABR, use the area 4 stub command with the no - summary keyword

    C

    On the ABR, specify a default cost for the area with the area default - cost command

    D

    On the ABR, use the default - information originate  command to inject a default route into area 4

    E

    Use the auto - cost command on each router in the area to automatically determine the cost to other OSPF areas


    正确答案: C,A
    解析: 暂无解析

  • 第10题:

    单选题
    Which statement is true about the command ipv6 ospf 1 area 0?()
    A

    It must be issued before the network command to enable the OSPF pr ocess for IPv6.

    B

    It must be issued after the network command to enable the OSPF process for IPv6.

    C

    It must be issued in router global configuration mode to enable the OSPF process for IPv6.

    D

    It must be issued in interface configuration mode to ena ble the OSPF process for IPv6.


    正确答案: B
    解析: 暂无解析

  • 第11题:

    单选题
    Which of the following is true about an OSPF area border router (ABR)?()
    A

    The ABR must have multiple interfaces connected to the backbone areA

    B

    An ABR is a router with two interfaces, each connected to a different nonbackbone areA

    C

    The only requirement to be considered an  ABR is at least one interface connected to the backbone areA

    D

    An ABR must have at least one interface in the backbone area plus at least one other interface in a nonbackbone areA


    正确答案: A
    解析: 暂无解析

  • 第12题:

    多选题
    You are troubleshooting an OSPF problem where external routes are not showing up in the OSPF database. Which two options a re valid checks that should be performed first to verify proper OSPF operation?()
    A

    Are the ASBRs trying to redistribute the external routes into a totally stubby area?

    B

    Are the ABRs configured with stubby areas?

    C

    Is the subnets keyword being used with the redistribution command?

    D

    Is backbone area (area 0) contiguous?

    E

    Is the CPU utilization of the routers high?


    正确答案: A,B
    解析: 暂无解析

  • 第13题:

    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()

    A. A virtual link to area 0.

    B. OSPF summarization command.

    C. default - cost extension to the area command.

    D. no - summary extension to the area stub comm and.

    E. None of the other alternatives apply


    参考答案:D

  • 第14题:

    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()

    • A、A virtual link to area 0.
    • B、OSPF summarization command.
    • C、default - cost extension to the area command.
    • D、no - summary extension to the area stub comm and.
    • E、None of the other alternatives apply

    正确答案:D

  • 第15题:

    When verifying the OSPF link state database, which type of LSAs should you expect to see within the different OS PF area types?()

    • A、All OSPF routers in stubby areas can have type 3 LSAs in their database.
    • B、All OSPF routers in stubby areas can have type 7 LSAs in their database.
    • C、All OSPF routers in totally stubby areas can have type 3 LSAs in  their database.
    • D、All OSPF routers in totally stubby areas can have type 7 LSAs in their database.
    • E、All OSPF routers in NSSA areas can have type 3 LSAs in their database.
    • F、All OSPF routers in NSSA areas can have type 7 LSAs in their database.

    正确答案:A,E,F

  • 第16题:

    what type of route can be advertised to OSPF totally stubby area?


    正确答案:LSA type 3 default route。

  • 第17题:

    Area Border Router (ABR) is a router located on the border of one or more OSPF areas that connect those areas to the backbone network. An ABR will inject a default route into which two types of areas?()

    • A、Area 0
    • B、NSSA
    • C、Totally stubby
    • D、Stub

    正确答案:C,D

  • 第18题:

    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?()

    • A、Router(config-router)# network 192.168.10.0 0.0.0.255 0
    • B、Router(config-router)# network 192.168.10.0 0.0.0.255 area 0
    • C、Router(config-router)# network 192.168.10.0 255.255.255.0 area 0
    • D、Router(config)# router ospf 0
    • E、Router(config)# router ospf 1

    正确答案:B,E

  • 第19题:

    多选题
    Which of the following OSPF commands, when used together, will put the network 192.168.10.0/24 into OSPF area 0?()
    A

    Router(config-router)# network 192.168.10.0 0.0.0.255 0

    B

    Router(config-router)# network 192.168.10.0 0.0.0.255 area 0

    C

    Router(config-router)# network 192.168.10.0 255.255.255.0 area 0

    D

    Router(config)# router ospf 0

    E

    Router(config)# router ospf 1


    正确答案: C,E
    解析: 暂无解析

  • 第20题:

    问答题
    what type of route can be advertised to OSPF totally stubby area?

    正确答案: LSA type 3 default route。
    解析: 暂无解析

  • 第21题:

    单选题
    Which of the following answers can be verified as true based on the following command output from Router R1?() R1#show ip ospf virtual - links Virtual Link OSPF_VL0 to router 4.4.4.4 is up Run as demand circuit DoNotAge LSA alloweD. Transit area 1, via interface FastEthernet0/1, Cost of using 3
    A

    R1 is configured with  an area 0 virtual - link 4.4.4.4 cost 3 command.

    B

    The ping 4.4.4.4 command on R1 must currently be successful.

    C

    R1's Fa0/0 OSPF cost is 3.

    D

    4.4.4.4 is known to R1 based on a Type 1 LSA in area 1.


    正确答案: A
    解析: 暂无解析

  • 第22题:

    单选题
    Which of the following is an OSPF configuration parameter that is used on an ABR, but not on an internal router?()
    A

    A virtual link to area 0.

    B

    OSPF summarization command.

    C

    default - cost extension to the area command.

    D

    no - summary extension to the area stub comm and.

    E

    None of the other alternatives apply


    正确答案: D
    解析: 暂无解析

  • 第23题:

    单选题
    The following command output was gathered from Router R1, an ABR between areas 0 (backbone) and area 1. In this internetwork, area 0 contains all the subnets of cla ss A network 10.0.0.0. R1's OSPF process has a distribute - list prefix question in command configured. Assuming the subnets listed in the answers actually exist in area 0. Which of the following occurs on router R1?() R1#sh ip prefix - list ip prefix - list question: 4 entries seq 5 deny 10.1.2.0/24 ge 25 le 27 seq 15 deny 10.2.0.0/16 ge 30 le 30 seq 20 permit 0.0.0.0/0 le 32
    A

    R1 will not create/flood a type 3 LSA for subnet 10.1.2.0/26 into area 1

    B

    R1 will not create/flood a Type 3 LSA for subnet 1 0.1.2.0/24 into area 1

    C

    R1 will not have an OSPF route for subnet 10.1.2.0/26 in its IP routing tablE

    D

    R1 will not have an OSPF route for subnet 10.1.2.0/24 in its IP routing tablE


    正确答案: B
    解析: 暂无解析