itgle.com

Refer to the exhibit. Router B is performing bidirectional redistribution between EIGRP an d OSPF.The network 10.100.1.0/24 should not be reachable from the 10.100.9.0/24 network. However, it needs to be reachable from any network within the EIGRP domain.

题目

Refer to the exhibit. Router B is performing bidirectional redistribution between EIGRP an d OSPF.The network 10.100.1.0/24 should not be reachable from the 10.100.9.0/24 network. However, it needs to be reachable from any network within the EIGRP domain. All other networks should be seen in both domains. Which change to router B would accom plish these goals?（）

A. Under the EIGRP process, insert the distribute - list block_net_1 out ospf 1 command.

B. Under the OSPF process, insert the distribute - list block_net_1 in serial1/0 command.

C. Under the EIGRP process, insert the distribute - list block_net_1 in serial1/0 command.

D. Under the OSPF process, insert the distribute - list block_net_1 out eigrp 1 command.

相似考题

1.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

2.Refer to the exhibit. BigBids Incorporated is a worldwide auction provider. The network uses EIGRP as its routing protocol throughout the corporation. The network administrator does not understand the convergence of EIGRP. Using the output of the show ip eigrp topology all - links command, answer the administrator‘s questions.Which three networks is the router at 172.17.10.2 directly connected to?（）A. 172.17.0.0/30B. 172.17.1.0/24C. 172.17.2.0/24D. 172.17.3 .0/25E. 172.17.3.128/25F. 172.17.10.0/24

3.Refer to the exhibit. EIGRP had converged in AS 1 when the link between router R1 and R2 went down. The console on router R2 generated the following messages:*Mar 20 12:12:06: %DUAL - 5NBRCHANG E: IP - EIGRP 1: Neighbor 10.1.4.3 (Serial0) is down: stuck in active*Mar 20 12:15:23: %DUAL -3- SIA: Route 10.1.1.0/24 stuck - in - active state in IP - EIGRP 1.Cleaning up The network administrator issued the show ip eigrp topology active command on R2 to check the status of the EIGRP network.Which statement best describes the reason for the error messages?（）A. Incorrect bandwidth configuration on router R3 prevents R2 from establishing neighbor adjacency.B. Incorrect bandwidth configuration on router R 5 prevents R2 from establishing neighbor adjacency.C. Router R3 did not reply to the query about network 10.1.1.0/24 sent by router R2 .D. Router R5 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

4.Refer to the exhibit. What must be done on router RTA to ensure that EIGRP works effectively in a Frame Relay multipoint environment?()A. Issue the command bandwidth 224 on the physical interface.B. Issue the command bandwidth 56 on the physical interface.C. Issue the command bandwidth 224 on each subinterface.D. Issue the command bandwidth 56 on each subinterface.

更多“Refer to the exhibit. Router B is performing bidirectional redistribution between EIGRP an ”相关问题

  • 第1题：

    Refer to the exhibit. Router B and router C are performing mutual redistribution between OSPF and EIGRP, and their default metrics are configured the same. Router D has equal cost paths to networks where both paths are not r eally equal cost. For example, network 172.16.54.0 shows equal cost through both router B and router C, though in reality the cost is greater using router C. Other routers, though not shown, are connected to the 172.16.54.0 and 172.16.55.0 networks, and the same issues exist to those routers and the networks connected to them. What can be done so that data will be routed along the most optimal path in the network? （）

    A. Redistribute connected interfaces on router B and router C

    B. Set the maximum nu mber of equal cost paths to1 in all routers

    C. When redistributing EIGRP into OSPF, set the external metric type to type E1

    D. Adjust the default metrics in router B and router C so that the values are different in each router

    E. None of these solut ions will fix the problem. Migrate to a single dynamic routing protocol


    参考答案：E

  • 第2题：

    Refer to the exhibit. Which statement about dynamic routing protocols for this network is true? ()

    A.No dynamic interior routing protocol can summarize as shown

    B.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibit

    C.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization points

    D.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy


    参考答案：C

  • 第3题：

    Refer to the exhibit. Which th ree commands should be used on router B1 to redistribute the EIGRP AS 10 routes into RIP?()

    A. router rip

    B. router eigrp 10

    C. redistribute eigrp 10

    D. redistribute rip

    E. default - metric 10000 100 255 1 1500

    F. default - metric 5


    参考答案：A, C, F

  • 第4题：

    Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

    A. Redistribution must be enabled mutually (in both directions) to work correctly.

    B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

    C. Default metrics are not configured under EIGRP.

    D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.


    参考答案：C

  • 第5题：

    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?()

    A. The map prohibits th e redistribution of all type 2 external OSPF routes.

    B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.

    C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.

    D. Th e map permits the redistribution of all type 1 external OSPF routes.

    E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.

    F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.


    参考答案：B, D, F

  • 第6题：

    Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto summariz ation is enabled on routers R2 and R3, but it is disabled on router R1.Which two EIGRP routes will be seen in the routing table of router R3?（）

    A. 10.0.0.0/8

    B. 172.16.10.0/24

    C. 172.16.0.0/24

    D. 10.10.10.0/24

    E. 172.16.0.0/16

    F. 10.10.0.0/16


    参考答案：D, E

  • 第7题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第8题：

    When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）

    • A、EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS
    • B、Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured
    • C、Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links
    • D、Configure of the VPN is only required on the PE router

    正确答案:D

  • 第9题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border router is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing OSPF routes are present in the routing  table of the border router
    • E、The subnet keyword on the border router in the redistribute OSPF command

    正确答案:D

  • 第10题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map？（）
    A

    The map prohibits the redistribution of all type 2 external OSPF routes with tag 6 set

    B

    The map prohibits the redistribution of all type 2 external OSPF routes

    C

    The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values40000， 1000， 255， 1， and 1500

    D

    The map prohibits the redistribution of all external OSPF routes with tag 6 set

    E

    All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8

    F

    The map permits the redistribution of all type 1 external OSPF routes


    正确答案： C,A
    解析： 暂无解析

  • 第12题：

    单选题
    When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? As a Network Engineer, it is necessary for you to know how to implement MPLS VPNs between Customer Edge and Provider Edge routers. Refer to the following descriptions, which one is making sense?（）
    A

    If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution

    B

    If using IS-IS as the PE-CE routing protocol, no redistribution is required

    C

    If using static routes between the CE and PE routers, no redistribution of other VPN routes is required

    D

    If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. EIGRP has been configured on router D. Router C is performing mutual redistribution between EI GRP and OSPF. While verifying that the redistribution is functioning properly, you discover that while router C has all of the EIGRP routes in its routing table, router A does not have any routes from the EIGRP domain. What on router C may be the cause o f the problem?（）

    A. The no auto - summary command needs to be added under router eigrp 1

    B. The subnets keyword was not included in the redistribute command under router ospf 1

    C. The metric specified for the redistributed EIGRP routes is too large; m aking the EIGRP routes unreachable by router A

    D. The default - information originate command needs to be added under router ospf 1

    E. The administrative distance of either OSPF or EIGRP must be changed so that EIGRP has a higher administrative distanc e than OSPF


    参考答案：B

  • 第14题：

    Refer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?（）

    A. Declare router B a stub router using the eigrp stub command.

    B. Use the passive - interface command for interface Serial0/0/0.

    C. Use a mask with the network command to exclude interface Serial0/0/0.

    D. Implement a distribute list to exclude the link prefix from the routi ng updates.


    参考答案：C

  • 第15题：

    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes.What should you verify to troubleshoot this problem?（）

    A. The border router is using a proper seed metric for OSPF

    B. The border router is using a proper seed metric for EIGRP

    C. The administrative distance is set for OSPF and EIGRP

    D. The missing OSPF routes are present in the routing table of the border router

    E. The subnet keyword on the border router in the redistribute OSPF command


    参考答案：D

  • 第16题：

    Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

    A. The redistribution command should be reentered with the match route - type parameter included.

    B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

    C. The redistribution command should be reentered with the metric metric - value parameter included.

    D. Routes will first need to be distributed into another protocol, and then into RIP.


    参考答案：C

  • 第17题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第18题：

    Refer to the exhibit. Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with EIGRP, and the entire network is in autonomous system 1. However,router RTB a nd RTC are not receiving each other‘s routes. What is the solution?（）

    A.Check and change the access lists on router RTA

    B.Configure the auto summary command under router eigrp 1 on router RTA

    C.Configure subinterfaces on the spoke routers and assig n different IP address subnets for each subinterface

    D.Issue the no ip split horizon command on router RTA

    E.Issue the no ip split horizon eigrp 1 command on router RTA

    F.Configure a distribute list on router RTA that allows it to advertise all r outes to the spoke routers


    参考答案：E

  • 第19题：

    When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? As a Network Engineer, it is necessary for you to know how to implement MPLS VPNs between Customer Edge and Provider Edge routers. Refer to the following descriptions, which one is making sense?（）

    • A、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution
    • B、If using IS-IS as the PE-CE routing protocol, no redistribution is required
    • C、If using static routes between the CE and PE routers, no redistribution of other VPN routes is required
    • D、If PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required

    正确答案:D

  • 第20题：

    You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one o f the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem?（）

    • A、The border router is using a proper seed metric for OSPF
    • B、The border ro uter is using a proper seed metric for EIGRP
    • C、The administrative distance is set for OSPF and EIGRP
    • D、The missing EIGRP routes are present in the routing table of the border router
    • E、The subnet keyword on the border router in the redistribute EIG RP command

    正确答案:D,E

  • 第21题：

    When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? （）

    • A、If using IS-IS as the PE-CE routing protocol, no redistribution is required.
    • B、If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.
    • C、If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.
    • D、If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.
    • E、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.

    正确答案:C

  • 第22题：

    单选题
    You have implemented mutua l route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the EIGRP routers within the EIGRP routing domain, you are seeing some, but not all of the expected routes. What should you verify to troubleshoot this problem?（）
    A

    The border router is using a proper seed metric for OSPF

    B

    The border router is using a proper seed metric for EIGRP

    C

    The administrative distance is set for OSPF and EIGRP

    D

    The missing OSPF routes are present in the routing  table of the border router

    E

    The subnet keyword on the border router in the redistribute OSPF command


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）
    A

    EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS

    B

    Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured

    C

    Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links

    D

    Configure of the VPN is only required on the PE router


    正确答案： C
    解析： 暂无解析

相关内容