itgle.com

Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR／BDR (designated router ／ backup designated router) election process?()A. TK1# show ip ospf interfaceB. TK1# show ip ospf priorityC. TK1# show ospf neig

题目
Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR／BDR (designated router ／ backup designated router) election process?()

A. TK1# show ip ospf interface

B. TK1# show ip ospf priority

C. TK1# show ospf neighbor detail

D. TK1# show ospf processes

E. TK1# show ospf neighbor state

相似考题

1.A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?（）A. Router# show protocolsB. Router# show versionC. Router# show imageD. Router# show IOSE. Router# show flash

2.A new network has been configured using OSPF as the routing protocol. With which network type will OSPF establish router adjacencies but not perform the DR／BDR election process?()A. point-to-pointB. Backbone area 0C. Broadcast multicastD. Non-broadcast multi-accessE. The DR/BDR process is done for all interface types

3.Under which network type circumstance would an OSPF router establish router adjacencies while not performing the DR／BDR election process?()A. Point-to-pointB. BroadcastC. Non-broadcast multi-accessD. Backbone area 0E. None of the above

4.Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）A. All OSPF implementations must have at le ast one interface in area 0.B. You are attempting to run in the broadcast mode over an NBMA interface.C. Both routers are configured to function as a BDR; therefore, there is no DR router.D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.

更多“Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR／BDR (designated router ／ backup designated router) election process?() ”相关问题

  • 第1题：

    Refer to the exhibit. What two statements are true?()

    A. This is the designated router (DR) on the FastEthernet 0/0 link.

    B. The output was generated by the show ip interface c ommand.

    C. The router was configured with the commands:r outer ospf 1 network 172.16.6.0 0.0.0.255 area 1

    D. The IP address of the backup designated router (BDR) is FE80::205:5FFF:FED3:5808.

    E. Interface FastEthernet 0/0 was configured with the ipv6 o spf 1 area 1 command.

    F. OSPF version 2 has been enabled to support IPv6.


    参考答案：D, E

  • 第2题：

    Which of the following commands will display the name of the IOS image file being used in a Cisco router?()

    A. Router# show IOS

    B. Router# show version

    C. Router# show image

    D. Router# show protocols

    E. Router# show flash


    参考答案：B, E

  • 第3题：

    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?()

    A.show inventory

    B.show flash：filesys

    C.dirflash：include chassis

    D.show diag

    E.show controllers


    参考答案：A, D

  • 第4题：

    Which of the following show commands would be used on the WDS to display the access points participating in fast secure roaming？（）

    • A、router# show wlccp ap
    • B、router# show wlccp wds ap
    • C、router# show wlccp cckm
    • D、router# show wlccp wds cckm

    正确答案:B

  • 第5题：

    Which of the following commands will display the name of the IOS image file being used in a Cisco router?（）

    • A、Router# show IOS
    • B、Router# show version
    • C、Router# show image
    • D、Router# show protocols
    • E、Router# show flash

    正确答案:B,E

  • 第6题：

    Under which circumstance, ie network type, would an OSPF router establish a neighbor adjacency, even though the DR/BDR election process was not performed?（）

    • A、Point-to-point
    • B、Broadcast multicast
    • C、Nonbroadcast multicast
    • D、Backbone area 0
    • E、Virtual Link

    正确答案:A

  • 第7题：

    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?（）

    • A、show inventory
    • B、show flash：filesys
    • C、dirflash：include chassis
    • D、show diag
    • E、show controllers

    正确答案:A,D

  • 第8题：

    单选题
    Under which circumstance, ie network type, would an OSPF router establish a neighbor adjacency, even though the DR/BDR election process was not performed?（）
    A

    Point-to-point

    B

    Broadcast multicast

    C

    Nonbroadcast multicast

    D

    Backbone area 0

    E

    Virtual Link


    正确答案： E
    解析： 暂无解析

  • 第9题：

    问答题
    Which OSPF network type is ideal for partially meshed NBMA networks because it is easy to configure（requires no configuration of neighbor commands）， consumes only one IP subnet， and requires no designated router election？

    正确答案： Point-to-multipoint.
    解析： 暂无解析

  • 第10题：

    单选题
    Under which network type circumstance would an OSPF router establish router adjacencies while not performing the DR/BDR election process?（）
    A

    Point-to-point

    B

    Broadcast

    C

    Non-broadcast multi-access

    D

    Backbone area 0

    E

    None of the above


    正确答案： E
    解析： 暂无解析

  • 第11题：

    多选题
    Which of the following commands will display the name of the IOS image file being used in a Cisco router?（）
    A

    Router# show IOS

    B

    Router# show version

    C

    Router# show image

    D

    Router# show protocols

    E

    Router# show flash


    正确答案： D,E
    解析： 暂无解析

  • 第12题：

    多选题
    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）
    A

    The show ip ospf neighbors command lists two neighbors off Fa0/0.

    B

    The show ip ospf neighbors command lists four neighbors off Fa0/0.

    C

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.

    D

    The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    Which one of the following commands will display the placement and direction of an IP access control list on the interfaces of a router?()

    A. show interface list

    B. show ip route

    C. show ip interface

    D. show ip interface brief

    E. show interface


    参考答案：C

  • 第14题：

    Under which circumstance, ie network type, would an OSPF router establish a neighbor adjacency, even though the DR／BDR election process was not performed?()

    A. Point-to-point

    B. Broadcast multicast

    C. Nonbroadcast multicast

    D. Backbone area 0

    E. Virtual Link


    参考答案：A

  • 第15题：

    A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?（）

    • A、Router# show protocols
    • B、Router# show version
    • C、Router# show image
    • D、Router# show IOS
    • E、Router# show flash

    正确答案:B

  • 第16题：

    Under which network type circumstance would an OSPF router establish router adjacencies while not performing the DR/BDR election process?（）

    • A、Point-to-point
    • B、Broadcast
    • C、Non-broadcast multi-access
    • D、Backbone area 0
    • E、None of the above

    正确答案:A

  • 第17题：

    Which OSPF network type is ideal for partially meshed NBMA networks because it is easy to configure（requires no configuration of neighbor commands）， consumes only one IP subnet， and requires no designated router election？


    正确答案:Point-to-multipoint.

  • 第18题：

    Which one of the following commands will display the placement and direction of an IP access control list on the interfaces of a router?（）

    • A、show interface list
    • B、show ip route
    • C、show ip interface
    • D、show ip interface brief
    • E、show interface

    正确答案:C

  • 第19题：

    Rout er R1 directly connects to subnet 10.1.1.0/24 with its Fa0/0 interface. R1 can ping four other working OSPF routers in that subnet. R1 is neither the designated router (DR) nor backup DR (BDR). OSPF is working correctly on all five routers. Which of the following is true on R1?（）

    • A、The show ip ospf neighbors command lists two neighbors off Fa0/0.
    • B、The show ip ospf neighbors command lists four neighbors off Fa0/0.
    • C、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the FULL state.
    • D、The show ip ospf neighbors command lists two neighbors off Fa0/0 in the DISCO state.

    正确答案:B,C

  • 第20题：

    单选题
    Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR/BDR (designated router / backup designated router) election process?（）
    A

    TK1# show ip ospf interface

    B

    TK1# show ip ospf priority

    C

    TK1# show ospf neighbor detail

    D

    TK1# show ospf processes

    E

    TK1# show ospf neighbor state


    正确答案： E
    解析： 暂无解析

  • 第21题：

    单选题
    In the IS-IS Designated Intermediate System （DIS） election process， which criteria is used for DIS selection？（）
    A

    highest router ID first， then highest priority

    B

    highest MAC address first， then highest priority

    C

    highest router ID first， then highest MAC address

    D

    highest priority first， then highest router ID

    E

    highest priority first， then highest MAC address


    正确答案： D
    解析： 暂无解析

  • 第22题：

    多选题
    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?（）
    A

    show inventory

    B

    show flash：filesys

    C

    dirflash：include chassis

    D

    show diag

    E

    show controllers


    正确答案： A,C
    解析： 暂无解析

  • 第23题：

    单选题
    A new network has been configured using OSPF as the routing protocol. With which network type will OSPF establish router adjacencies but not perform the DR/BDR election process?（）
    A

    point-to-point

    B

    Backbone area 0

    C

    Broadcast multicast

    D

    Non-broadcast multi-access

    E

    The DR/BDR process is done for all interface types


    正确答案： C
    解析： 暂无解析

相关内容