You try to add a new router into the established Testking OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers.The new router was configured for OSPF in the following way:Router(config) router

第1题：

A customer wants to TFTP a new image from the corporate network to Flash on the Teleworker router through the IPSec tunnel. How should you configure the Teleworker router?（）

• A、No additional steps are required. 
• B、Add the appropriate source-interface command. 
• C、The router cannot access a server in the Enterprise Campus network. 
• D、The Teleworker Router does not have any client applications; therefore this type of request is not possible.

第2题：

You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

• A、Router# copy tftp flash
• B、Router# copy flash run
• C、Router(config)# restore flash
• D、Router(config)# repair flash
• E、Router#copy flash tftp
• F、Router# copy start flash

第3题：

ou perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1.You plan to capture all the LDAP traffic that comes to and goes from the server between 20：00 and 07：00 the next day and save it to the E:///data.cap file.You create a scheduled task. You add a new Start a program action to the task. You need to add theapplication name and the application arguments to the new action. What should you do？（）

• A、Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e：/data.cap /stopwhen /timeafter 11hours line as arguments.
• B、Add netmon.exe as the application name. Add the /networks */capture LDAP /file e：/data.cap /stopwhen /timeafter 11hours line as arguments.
• C、Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e：/data.cap /stopwhen /timeafter 11hours line as arguments.
• D、Add nmconfig.exe as the application name. Add the /networks * /capture &LDAP /file e：/data.cap /stopwhen /timeafter 11hours line as arguments.

第4题：

Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0?（）

• A、Router(config)#router ospf 1
• B、Router(config)#router ospf 0
• C、Router(config)#router ospf area 0
• D、Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
• E、Router(config-router)#network 192.168.16.0 0.0.0.255 0
• F、Router(config-router)#network 192.168.16.0 255.255.255.0 area 0

第5题：

The Testking corporate LAN consists of one large flat network. You decide to segment this LAN into two separate networks with a router. What will be the affect of this change?（）

• A、The number of broadcast domains will be decreased.
• B、It will make the broadcasting of traffic between domains more efficient between segments.
• C、It will increase the number of collisions.
• D、It will prevent segment 1's broadcasts from getting to segment 2.
• E、It will connect segment 1's broadcasts to segment 2.

第6题：

You are the network administrator for Testking.com. The network consists of a single Active Directory forest that contains three domains. The functional level of the forest is Windows Server 2003. The domain names are testking.com, europe.testking.com, and asia.testking.com. Each domain contains 500 user accounts. TestKing.com is in the process of acquiring several other companies whose networks will be add to the testking.com Windows Server 2003 domain. These acquisitions will entail the addition of several new offices, which will be connected to TestKing's network by means of dedicated 56-Kbps WAN connections. You create a new shared folder named NewProjects on a file server in testking.com. Several users in each existing domain need access to the NewProjects folder. These users are not in the same group in any domain. All users who need access to the NewProjects folder must be able to add, delete, and modify files and folders in the NewProjects folder. Users in the acquired companies also will require access to this folder. You need to create the required Active Directory groups and configure the required permissions for the NewProjects folder. Your solution must minimize ongoing administrative effort as you add new companies to the network. You must also minimize unnecessary traffic across the WAN connections. What should you do?（）

• A、Create a single universal security group. Add all users that require access to the folder to the group. Create a domain local group in the testking.com domain. Add the universal group to the domain local group. Assign permissions to the shared folder by using the domain local group.
• B、Create a global security group in each domain. Add all users that require access to the folder to the global group in their domain. Create a domain local group in testking.com domain. Add the global groups to the domain local group. Assign permissions to the shared folder by using the domain local group.
• C、Create a universal security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the universal groups.
• D、Create a global security group in each domain. Add all users that require access to the folder to the group in their domain. Assign permissions to the shared folder by using the global groups.

第7题：

You are the network administrator for . The network consists of asingle Active Directory domain named. All network servers run Windows Server 2003. Terminal Services is installed on your network. You currently use a terminal server farm. Testking1, the first server in the farm, acts as the session directory server. All terminal servers are operating at maximum capacity. An increasing number of users report slow response times when they use these servers. You need to improve the performance of the terminal server farm. You plan to use a server named Testking4, which has hardware identical to that of the other terminal servers in the farm. First, you add Tesking4 to the Session Directory Computers group on Testking1. What should you do next?（）

• A、Add Testking4 to the Session Directory Computers group on the PDC emulator.
• B、On Testking4, select the Terminal Services configuration option to join the existing session directory.
• C、On Testking4, install the Session Directory service.
• D、On Testking4, create a new session directory server.

第8题：

You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1.You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:/data.cap file.You create a scheduled task. You add a new Start a program action to the task.You need to add the application name and the application arguments to the new action.What should you do？（）

• A、Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.
• B、Add netmon.exe as the application name. Add the /networks */capture LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.
• C、Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.
• D、Add nmconfig.exe as the application name. Add the /networks * /capture &LDAP /file e:/data.cap / stopwhen / timeafter 11hours line as arguments.

第9题：

第10题：

第11题：

第12题：

第13题：

A new router, named TK1, is being installed. You wish to add this router to your existing OSPF network. In doing so, you configure the following: TK1(config)# router ospf 1 TK1(config-router)# network 10.10.10.0 255.255.255.0 area 0 After making this change, you notice that the networks attached to TK1 are not being learned by the other OSPF routers. What could be the cause of this?（）

• A、The AS is not correctly configured
• B、The network subnet mask is incorrectly configured
• C、The network wildcard mask is configured incorrectly
• D、The network number is not correctly configured
• E、The process id is configured incorrectly
• F、None of the above

第14题：

You are trying to bring up a new Testking location onto your existing frame relay network. The new location is using an Adtran router and you are having difficulties getting the site to connect via frame to your Cisco HQ router. What is the most likely cause of the problem?（）

• A、Mismatched LMI types.
• B、Incompatible encapsulation types.
• C、Mismatching IP addresses.
• D、Incorrect DLCI.
• E、None of the above

第15题：

You work as the enterprise exchange administrator at TestKing.com. The TestKing.com network consistsof an Active Directory forest that contains a single domain named testking.com. TestKing.com has anExchange Server 2010 organization. For the future， you envisage to add a new domain to the forest as well as deploying the Exchange Server2010 servers in the domain. A TestKing.com employee named Andy Reid that is a member of an ActiveDirectory group. You have received instructions from the CIO to allow Andy Reid to install ExchangeServer 2010 servers in the new domain.  You thus nedd to identify the appropriate group to which AndyReid should be assigned（）

• A、You should add Andy Reid to the Server Operators group.
• B、You should add Andy Reid to the Domain Admins group.
• C、You should add Andy Reid to the Enterprise Admins group.
• D、You should add Andy Reid to the Exchange Install Domain Servers group.

第16题：

A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

• A、The process id is configured improperly
• B、The OSPF area is configured improperly
• C、The network wildcard mask is configured improperly
• D、The network number is configured improperly
• E、The AS is configured improperly
• F、The network subnet mask is configuerd improperly

第17题：

You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1. You plan to capture all the LDAP traffic that comes to and goes from the server between 20：00 and 07：00 the next day and save it to the e：/data.cap file. You create a scheduled task. You add a new Start a program action to the task. You need to add the application name and the application arguments to the new action. What should you do？（） 

• A、 Add nmcap.exe as the application name. Add the /networks * /capture LDAP /file e：/data.cap / stopwhen /timeafter 11hours line as arguments
• B、 Add netmon.exe as the application name. Add the /networks */capture LDA /file e：/data.cap /stopwhen / T.imeafter 11hours line as arguments
• C、 Add nmcap.exe as the application name. Add the /networks * /capture !LDAP /file e：/data.cap /stopwhen /timeafter 11hours line as arguments
• D、 Add nmconfig.exe as the application name. Add the /networks */capture &LDAP /file e：/data.cap / stopwhen /timeafter 11hours line as arguments

第18题：

You are the network administrator for The network consists of a single Active Directory domain named All network servers run Windows Server 2003. A member server named TestKing17 hosts several shared folders. Users report that they receive an error message when they try to connect to the shared folders. The error message states: "No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept." How should you solve the problem?（）

• A、Add an additional network adapter to TestKing17. Configure a network bridge between the new network adapter and the original network adapter.
• B、Purchase additional per-seat licenses for TestKing17. In Control Panel on TestKing17, run the Licensing application. Add the additional licenses to TestKing17.
• C、Disable quota management on TestKing17.
• D、In Active Directory Sites and Services, select the site that contains TestKing17. Add an additional Active Directory connection object to the domain controller for the site.

第19题：

You are the network administrator for TestKing.com Active Directory domain. The domain includes Windows Server 2003 domain controllers and Windows XP Professonal client computers. A new administrator named Sandra is hired to assist you in deploying Windows XP Professional to 100 new computers. Sandra installs the operating system on a new computer named TestKing11. However, when Sandra tries to log on to the domain from TestKing11, she is unsuccessful. The logon box does now allow her to view and select the domain name. You need to ensure that Sandra can log on to the domain from TestKing11. What should you do?（）

• A、Enable the computer account for Testking11.
• B、Configure TestKing11 as a member of the domain.
• C、Add Sandra's user account to the Enterprise Admins group.
• D、Add Sandra's user account to the Server Operators group.

第20题：

第21题：

第22题：

第23题：

第24题：