itgle.com

A router receives an IPv6 packet which is 2000 bytes in length. The MTU of the outgoing interface is 1500 bytes. Which action will the router take?()A. Forward the packet.B. Fragment the packet.C. Drop the packet silently.D. Drop the packet and send an IC

题目
A router receives an IPv6 packet which is 2000 bytes in length. The MTU of the outgoing interface is 1500 bytes. Which action will the router take?()

A. Forward the packet.

B. Fragment the packet.

C. Drop the packet silently.

D. Drop the packet and send an ICMPv6 message.

相似考题

1.某园区网采用OSPF路由协议，参与OSPF的网络地址是169.111.0.0/16，Cisco路由器的正确配置是______。A．Router(config) #router ospf 63 Router(config-router) #network 169.111.0.0 0.0.0.0 area 0 Router(config-router) #area 0 range 169.111.0.0 255.255.0.0B．Router(config) #router ospf 63 Router(config-router) #network 169.111.0.0 255.255.0.0 area 0 Router(config-router) #area 0 range 169.111.0.0 255.255.0.0C．Router(config) #router ospf 63 Router(config-router) #network 169.111.0.0 0.0.255．255 area 0 Router(config-router) #area 0 range 169.111.0.0 255.255.0.0D．Router(config) #router ospf 63 Router(config-router) #network 169.111.0.0 0.0.255.255 area 0 Router(config-router) #area 0 range 169.111.0.0 0.0.255.255

2.【问题2】（3分）根据图4-1的配置，补充完成下面路由器的配置命令：Router（config）# interface （3）Router（config-if）#ip address 10.10.1.1 255.255.255.0Router（config-if）#no shutdownRouter（config-if）#exitRouter（config）# interface （4）Router（config-if）# ip address 192.168.1.1 255.255.255.0Router（config）# interface （5）Router（config-if）# ip address 10.10.2.1 255.255.255.0

3.Cisc0路由器第3模块第1端口通过El标准的DDN专线与-台远程路由器相连，端口的IP地址为195．112．41．81/30，远程路由器端口封装PPP协议。下列路由器的端口配置，正确的是（ ）。A.Router（config）#interface s3/1Router（config-if）#bandwidth 2048Router（config-if）#ip address l95．112．41．81 255．255．255．252Router（cortfig-if）#encapsulation PPPRouter（config-if）#exitB.Router（config）#interface a3/1Router（config-if）#bandwidth 2000Router（config-if）#ip address 195．112．41．81 255．255．255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitC.Router（config）#interface s3/lRouter（config-if）#bandwidth 2Router（config-if）#ip address 195．112．41．81 255．255：255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitD.Router（config）#interface s3/1Router（config-if）#bandwidth 2048Router（config-if）#ip address 195．112．41．81 255．255．255．252Router（config-if）#encapsulation hdlcRouter（config-if）#exit

4.Cisco路由器第3模块第1端口通过E1标准的DDN专线与一台远程路由器相连，端口的IP地址为195.112.41.81/30，远程路由器端口封装PPP协议。下列路由器的端口配置，正确的是A）Router (config)#interface s3/1Router (config-if)#bandwidth 2048Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitB）Router (config)#interface a3/1Router (config-if)#bandwidth 2000Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitC）Router (config)#interface s3/1Router (config-if)#bandwidth 2Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitD）Router (config)#interface s3/1Router (config-if)#bandwidth 2048Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation hdlcRouter (config-if)#exit

更多“A router receives an IPv6 packet which is 2000 bytes in length. The MTU of the outgoing interface is 1500 bytes. Which action will the router take?() ”相关问题

  • 第1题：

    A technician at TestKing needs to update the network documentation. One of the tasks includes documenting the name of the IOS image file of each router in the network.Which commands could be used to find this information?（）

    A. Router# show protocols

    B. Router# show version

    C. Router# show image

    D. Router# show IOS

    E. Router# show flash


    参考答案：B

  • 第2题：

    You wish to upgrade the IOS of a router without removing the image currently installed.What command will display the amount of memory that is being used by the current IOS image and whether there is enough room available to hold both the current and new images?（）

    A. Router# show version

    B. Router# show flash

    C. Router# show memory

    D. Router# show buffers

    E. Router# show running-config

    F. All of the above


    参考答案：B

  • 第3题：

    Which of the following commands will display the name of the IOS image file being used in a Cisco router?()

    A. Router# show IOS

    B. Router# show version

    C. Router# show image

    D. Router# show protocols

    E. Router# show flash


    参考答案：B, E

  • 第4题：

    Which command will display all the EIGRP feasible successor routes known to a router?()

    A. Router# show ip eigrp routes *

    B. Router# show ip eigrp summary

    C. Router# show ip eigrp topology

    D. Router# show ip eigrp adjacencies

    E. Router# show ip eigrp neighbors detail


    参考答案：C

  • 第5题：

    You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）

    A. Router# copy tftp flash

    B. Router# copy flash run

    C. Router(config)# restore flash

    D. Router(config)# repair flash

    E. Router#copy flash tftp

    F. Router# copy start flash


    参考答案：A

  • 第6题：

    WhenconfiguringMulticastVPN(MVPN)overanMPLScore,boththeDefaultandDataMDTisconfiguredunderwhichconfigurationmode?()

    A.router（config）#

    B.router（config-if）#

    C.router（config-vrf）#

    D.router（config-router）#

    E.router（config-router-af）#


    参考答案：C

相关内容