itgle.com

When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?()A. profileB. domain mapC. DHCP serverD. RADIUS server

题目
When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?()

A. profile

B. domain map

C. DHCP server

D. RADIUS server

相似考题

1.Cisco路由器第3模块第1端口通过E1标准的DDN专线与一台远程路由器相连，端口的IP地址为195.112.41.81/30，远程路由器端口封装PPP协议。下列路由器的端口配置，正确的是A）Router (config)#interface s3/1Router (config-if)#bandwidth 2048Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitB）Router (config)#interface a3/1Router (config-if)#bandwidth 2000Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitC）Router (config)#interface s3/1Router (config-if)#bandwidth 2Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation pppRouter (config-if)#exitD）Router (config)#interface s3/1Router (config-if)#bandwidth 2048Router (config-if)#ip address 195.112.41.81 255.255.255.252Router (config-if)#encapsulation hdlcRouter (config-if)#exit

2.Cisc0路由器第3模块第1端口通过El标准的DDN专线与-台远程路由器相连，端口的IP地址为195．112．41．81/30，远程路由器端口封装PPP协议。下列路由器的端口配置，正确的是（ ）。A.Router（config）#interface s3/1Router（config-if）#bandwidth 2048Router（config-if）#ip address l95．112．41．81 255．255．255．252Router（cortfig-if）#encapsulation PPPRouter（config-if）#exitB.Router（config）#interface a3/1Router（config-if）#bandwidth 2000Router（config-if）#ip address 195．112．41．81 255．255．255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitC.Router（config）#interface s3/lRouter（config-if）#bandwidth 2Router（config-if）#ip address 195．112．41．81 255．255：255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitD.Router（config）#interface s3/1Router（config-if）#bandwidth 2048Router（config-if）#ip address 195．112．41．81 255．255．255．252Router（config-if）#encapsulation hdlcRouter（config-if）#exit

3.Which three statements are correct regarding the CLI command, 12tp destination profile to－NewYork virtual－router vr1 ip address 1.1.1.1 ? ()(Choose three.)A. LNS IP address is defined.B. LAC IP address is defined.C. Virtual-router vr1 sends and receives L2TP traffic.D. Virtual-router vr1 is the authenticating virtual-router.E. This command is performed on the LNS.

4.一台Cisc0路由器R1的第3模块第1端口通过DDN的E1专线与一台远程路由器R2的第4模块第2端口相连，在R1的端口上封装PPP协议。为R1和R2端口分配的IP地址分别为193．42．91．201/30和193．42．91．202/30。下列R2的端口配置，正确的是（ ）。A.Router（cortfig）#interface s4/2Router（config-if）#bandwidth 2048Router（config-if）#ip address 193．42．91．202 255．255．255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitB.Router（config）#interface a4/2Router（config-if）#bandwidth 2048Router（config-if）#ip address 193．42．91．202 255．255．255．252Router（config-if）#encapsulation PPPRouter（config-if）#exitC.Router（config）#interface s4/2Router（config-if）#bandwidth 2048Router（config-if）#ip address 193．42．91．201 255．255．255．252Router（config-if）#encapsulation hdleRouter（config-if）#exitD.Router（config）#interface a4/2Router（config-if）#bandwidth 2048Router（config-if）#ip address 193．42．91．202 255．255．255．252Router（config-if）#encapsulation hdlcRouter（config-if）#exit

更多“When controlling the virtual router assignment for a PPP over ATM client, which mechanism does the router use first?() ”相关问题

  • 第1题：

    The output of the show aaa domain-map displays the following information:Domain: isp1.com; virtual-router: vr1; loopback: 1Domain: isp2.com; virtual-router: vr2; loopback: 1Domain: none; virtual-router: vr3; loopback: 1Domain: default; virtual-router: vr4; loopback: 1The end user supplies a login name of joe@isp7.com .Which virtual router is responsible for authenticating this user?（）

    A. vr1

    B. vr2

    C. vr3

    D. vr4


    参考答案：D

  • 第2题：

    Refer to the exhibit. During the process of configuring a virtual link to connect area 2 with the backbone area, the network administrator received this console message on R3:*Mar 1 00:2 5:01.084: %OSPF -4- ERRRCV: Received invalid packet: mismatch area ID, from backbone area must be virtual link but not found from 20.20.20.1, Serial 0 .How should the virtual link be configured on the OSPF routers to establish full connectivity between the areas?（）

    A.R1(config - router)# area 0 virtual - link 1.1.1.1R3(config - router)# area 2 virtual - link 3.3.3.3

    B.R1(config - router)# area 1 virtual - link 2.2.2.2 R3(config - router)# area 1 virtual - link 2.2.2.2

    C.R1(config - router)# area 1 virtual - link 20.20 .20.2 R3(config - router)# area 1 virtual - link 30.30.30.2

    D.R1(config - router)# area 1 virtual - link 30.30.30.3 R3(config - router)# area 1 virtual - link 20.20.20.1

    E.R1(config - router)# area 1 virtual - link 3.3.3.3 R3(config - router)# area 1 virtual - link 1.1 .1.1


    参考答案：E

  • 第3题：

    3、【STCS_03_2】配置PPP验证方式为chap的命令为：

    A．Router(config)#encapsulation ppp chap

    B．Router(config-if)#encapsulation chap

    C．Router(config-if)#ppp authentication chap

    D．Router(config-if)#encapsulation ppp chap


    错误

  • 第4题：

    Which command will display all the EIGRP feasible successor routes known to a router?()

    A. Router# show ip eigrp routes *

    B. Router# show ip eigrp summary

    C. Router# show ip eigrp topology

    D. Router# show ip eigrp adjacencies

    E. Router# show ip eigrp neighbors detail


    参考答案：C

  • 第5题：

    Which of the following commands will display the name of the IOS image file being used in a Cisco router?()

    A. Router# show IOS

    B. Router# show version

    C. Router# show image

    D. Router# show protocols

    E. Router# show flash


    参考答案：B, E

  • 第6题：

    2、【STCS_03_2】给接口配置PPP协议的命令：

    A．Router(config)#encapsulation ppp

    B．Router(config-if)#encapsulation ppp

    C．Router(config-if)#encapsulation pap

    D．Router(config-if)#encapsulation ppp pap


    传输距离短;有电平偏移;抗干扰能力差

相关内容