itgle.com

What is the proper command to create a DHCP address pool?()A.ip local-poolB.ip local poolC.ip dhcp local poolD.ip dhcp-local pool

题目
What is the proper command to create a DHCP address pool?()

A.ip local-pool

B.ip local pool

C.ip dhcp local pool

D.ip dhcp-local pool

相似考题

1.在路由器上建立一个名为test的DHCP地址池，并为其分配IP地址202.112.7.0、24，子网地址中的202.112.7.2～202.112.7.10作为静态地址分配，正确的DHCP配置是A．Router(config)#ip dhcp pool test Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(dhcp-config)#network 202.112.7.0 255.255.255.0B．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0/24C．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 0.0.0.255D．Router(config)#ip dhcp excluded-address 202.112.7.2-10 Router(config)#ip dhcp pool test Router(dhcp-config)#network 202.112.7.0 255.255.255.0

2.YouarecreatingthesimpleresourceplanusingtheDBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLANprocedure.Whichresourceallocationpolicywillbeusedfortheresourceplan?()A.RATIOB.EMPHASISC.ACTIVE_SESS_POOL_MTHD.RESOURCE_DEGREE_LIMIT_ABSOLUTE

3.WhichtypeofsourceNATisconfiguredintheexhibit？（）[editsecuritynatdestination]user@hostshowpoolA{address10.1.10.5/32；}rule-set1{fromzoneuntrust；rule1A{match{destination-address100.0.0.1/32；}then{destination-natpoolA；}}}A.staticdestinationNATB.staticsourceNATC.pool-baseddestinationNATwithoutPATD.pool-baseddestinationNATwithPAT

4.YouwantanASMinstancetomanagethefilesofyourdatabase.Toachievethisobjective，youspecifythefollowingparametersintheparameterfileofthedatabase：INSTANCE_TYPE=RDBMSDB_NAME=PRODLARGE_POOL_SIZE=8MBDB_BLOCK_SIZE=4KLOG_ARCHIVE_DEST=+dgroupALOG_ARCHIVE_FORMAT="$ORACLE_SID_%s_%t.%t"DB_CREATE_FILE_DEST=+dgroupACOMPATIBLE=10.1.0.2.0CONTROL_FILES=+dgroupAWhichparameterwouldbeignoredwhilestartinguptheinstanceforthedatabasePROD？（）A.DB_BLOCK_SIZEB.CONTROL_FILESC.LARGE_POOL_SIZED.LOG_ARCHIVE_DESTE.LOG_ARCHIVE_FORMATF.DB_CREATE_FILE_DEST

更多“What is the proper command to create a DHCP address pool?() ”相关问题

  • 第1题：

    WhichtypeofsourceNATisconfiguredintheexhibit？（）[editsecuritynatsource]user@hostshowrule-set1{frominterfacege-0/0/2.0；tozoneuntrust；rule1A{match{destination-address1.1.70.0/24；}then{source-natinterface；}}}

    A.interface-basedsourceNAT

    B.staticsourceNAT

    C.pool-basedsourceNATwithPAT

    D.pool-basedsourceNATwithoutPAT


    参考答案：A

  • 第2题：

    在某台Cisco路由器中定义一个名为test的DHCP地址池(192.168.3.0/26)，并保留192.168.3.62/29的IP地址。下列正确的配置语句是(29)。

    A．Router(config)#ip dhcp pooltest Router(dhcp-config)#network 192.168.3.00.0.0.63 Router(dhcp-config)#ip dhcp excluded-address192.168.3.62

    B．Router(config)#ip dhcp poo1 test Router(dhcp-config)#network 192.168.3.0255.255.255.192 Router(dhcp-config)#ip dhcp excluded-address 192.168.3.62255.255.255.248

    C．Router(config)#ip dhcp poo1 test Router(dhcp-config)#network 192.168.3.0/26 Router(dhcp-config)#ip dhcp excluded-address 192.168.3.62/29

    D．Router(config)#ip dhcp excluded-address 192.168.3.56192.168.3.62 Router(config)#ip dhcp pool test Router(dhcp-config)#network 192.168.3.0/26


    正确答案：D
    解析：子网地址是DHCP服务器可以分配给DHCP客户的有效IP地址范围。在DHCP Pool配置模式下，使用命令“networknetwork-number＞[mask|/prefix-length]”配置IP地址池的子网地址和子网掩码。其中，子网掩码参数允许以两种形式表达，一种形式常见的点分十进制数表达形式(如 255.255.255.192)，另一种形式是给出掩码前缀的长度，即掩码位为“1”的个数，如“255.255.255.192”可以写成“/26”。本试题中，配置DHCP地址池192.168.3.0/26的语句如下：
      Router(dhcp-config)#network192.168.3.0255.255.255.192
      或Router(dhcp-contig)#network192.168.3.0/26
      可以在全局配置模式“Router(config)#”下，使用“ip dhcp excluded-address low-address[high-address]”命令将要保留的地址从IP地址池中排除，使之成为不能动态分配的地址。本试题中，需要排除的IP地址范围是192.168.3.62/29。其中，“/29”是子网掩码255.255.255.248的前缀的长度。由于IP地址192.168.3.62的二进制表示是“1100 0000 1010 1000 0000 0011 1110”，其中阴影部分是子网掩码覆盖的比特范围，因此192.168.3.62/29所表达的IP地址范围是192.168.3.56-192.168.3.63。再由于192.168.3.63是 192.168.3.0/26网段的直接广播地址，需要排除，因此保留IP地址范围192.168.3.62/29的配置语句如下：
      Router(config)#ip dhcp excluded-adclress 192.168.3.56 192.168.3.62
      本试题选项A的“ip dhcp excluded-address192.168.3.62”仅排除单个IP地址192.168.3.62。选项B和选项C保留IP地址配置命令所在的配置模式有误，且不允许出现选项B的“ip dhcp exclude_address192.168.3.62 255.255.255.248”和选项C的“ip dhcp excluded-address 192.168.3.62/29”等带有子网掩码的格式。

  • 第3题：

    在DHCP配置文件中，表示地址池的选项是（）

    A．subnet

    B．netmask

    C．range

    D．pool


    range

  • 第4题：

    tonywouldliketomakeiteasierforusersofthevideoapplicationtoenternewdocusingthe“videoform”,he’dlikeuserstobeabletocreatenew“video”docformwithintheview.Whichoneofthefollowingshouldtonysotobuildthisinterface?（）

    A.createaviewactionthathasthefollowingformula：@command（[create]；”video”）

    B.createaformactionthathasthefollowingformula：@command（[compose]；”video”）

    C.createaviewactionthathasthefollowingformula：@command（[compose]；”video”）

    D.createadatabaseactionthathasthefollowingformula：@command（[compose]；”video”）


    参考答案：C

  • 第5题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.100.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.255.0 ip default-gateway 192.168.100.1#B.ip dhcp excluded-address 192.168.100.1 192.168.100.10 ip dhcp excluded-address 192.168.101.254 ip dhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.dhcp pool LAN-POOL-100 ip dhcp excluded-address 192.
    C

  • 第6题：

    使用哪组命令可将路由器配置为 DHCP 路由器，从而将 IPv4 地址分配给 192.168.100.0/23 LAN，同时为静态分配保留前 10 个和最后一个地址？

    A.dhcp pool LAN-POOL-100 ipdhcp excluded-address 192.168.100.1 192.168.100.9 ipdhcp excluded-address 192.168.100.254 network 192.168.100.0 255.255.254.0 default-router 192.168.101.1#B.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp excluded-address 192.168.100.254 ipdhcp pool LAN-POOL-100 network 192.168.100.0 255.255.254.0 default-router 192.168.100.1#C.ipdhcp excluded-address 192.168.100.1 192.168.100.10 ipdhcp exclu
    A. ip route-static

相关内容