itgle.com

While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?A．The data link layerB．The application layerC．

题目

While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."

At which OSI layer is this problem associated with?

A．The data link layer

B．The application layer

C．The access layer

D．The session layer

E．The network layer

相似考题

1.While troubleshooting a connectivity issue from a PC you obtain the following information:Local PC IP address: 190.0.3.35/24Default Gateway: 190.0.3.1Remote Server: 190.0.5.250/24You then conduct the following tests from the local PC:Ping 127.0.0.1 - UnsuccessfulPing 190.0.3.35 - SuccessfulPing 190.0.3.1 - UnsuccessfulPing 190.0.5.250 – UnsuccessfulWhat is the underlying cause of this problem?A．TCP/IP not correctly installedB．Local physical layer problemC．NIC not functioningD．Remote physical layer problemE．None of the above

2.You have just installed a new web server on the Ezonexam network. You are required to ensure that the web server is accessible from the Internet. The network uses private addressing, so an IP-to-registered address mapping is required.To do this, you enter the following command:Ezonexam(config)# ip nat inside source static 192.168.2.1198.18.1.254You unsuccessfully try to ping the Internet from a PC host on the LAN. During the troubleshooting process, you enter the "show ip nat translations" command but the output is blank.What is the most likely cause of the problem?A．The keyword overload is missing from the command.B．The NAT pool must be defined first.C．An access list must be defined to create static NAT translations.D．The interfaces must be configured for NAT.E．None of the above

3.Which layer in the OSI model is responsible for translating frames into bits?()A. Application LayerB. Presentation LayerC. Data Link LayerD. Physical Layer

4.While troubleshooting a network connectivity problem, a Ezonexam technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the 7-layer OSI model does the problem most likely exist?A. The data link layerB. The application layerC. The protocol layerD. The access layerE. The session layerF. The network layerG. None of the above

参考答案和解析
正确答案：E
解析：Explanation:
TCP/IP includes ICMP, a protocol designed to help manage and control the operation of a TCP/IP network. The ICMP protocol provides a wide variety of information about a network's health and operational status. Control message is the most descriptive part of a name. ICMP helps control and manage IP's work and therefore is considered part of TCP/IP's network layer.
更多“While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?A．The data link layerB．The application layerC．”相关问题

  • 第1题：

    A Ezonexam technician is troubleshooting connectivity problems between two routers that are directly connected through the serial line. The technician notices that the serial line is up but cannot see any neighbors displayed in the output of the show cdp neighbors command.

    In which OSI layer is the problem most likely occurring?

    A．Physical

    B．Data link

    C．Network layer

    D．Transport layer

    E．Application layer


    正确答案：B
    解析：Explanation:Asthequestionstatesthatseriallineisup,itmeanstheproblemisnotontheNetworklayer.Theadministratorcannotseeanyoutputbyissuingtheshowcdpneighborscommand.ItmeansthatCDPisdisabledandCDPisaprotocolthatrunsoverLayer2(thedatalinklayer)onallCiscorouters,bridges,accessservers,andswitches.

  • 第2题：

    The TCP／IP network model differs from the more popular OSI model. Which of the layers below belong to the TCP／IP model?()

    A. application layer

    B. session layer

    C. transport layer

    D. internet layer

    E. network layer

    F. data link layer

    G. physical layer


    参考答案：A, C, D

  • 第3题：

    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC. If a reply is received, what does this confirm?()

    A. The PC has connectivity with a local host.

    B. The PC has connectivity with a Layer 3 device.

    C. The PC has a default gateway correctly configured

    D. The PC has connectivity up to Layer 5 of the OSI model

    E. The PC has the TCP/IP protocol stack correctly installed.


    参考答案：E

  • 第4题：

    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC.If a reply is received, what does this confirm?()

    A.The PC has connectivity with a local host.

    B.The PC has connectivity with a Layer 3 device.

    C.The PC has a default gateway correctly configured

    D.The PC has connectivity up to Layer 5 of the OSI model

    E.The PC has the TCP/IP protocol stack correctly installed.


    参考答案：E

  • 第5题：

    Which OSI layer does a bridge operate at?

    A．the Physical Layer

    B．the Network Layer

    C．the Transport Layer

    D．the Data Link Layer


    正确答案：D

  • 第6题：

    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 190.0.3.35/24 Default Gateway: 190.0.3.1 Remote Server: 190.0.5.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 - Unsuccessful Ping 190.0.3.35 - Successful Ping 190.0.3.1 - Unsuccessful Ping 190.0.5.250 - Unsuccessful What is the underlying cause of this problem?（）

    • A、TCP/IP not correctly installed
    • B、Local physical layer problem
    • C、NIC not functioning
    • D、Remote physical layer problem

    正确答案:A

  • 第7题：

    While troubleshooting a connectivity issue from a PC you obtain the following information:Local PC IP address: 10.0.0.35/24Default Gateway: 10.0.0.1Remote Sever: 10.5.75.250/24You then conduct the following tests from the local PC:Ping 127.0.0.1 – SuccessfulPing 10.0.0.35 – SuccessfulPing 10.0.0.1 – UnsuccessfulPing 10.5.75.250 – UnsuccessfulWhat is the underlying cause of this problem?（）

    • A、A remote physical layer problem exists.
    • B、The host NIC is not functioning.
    • C、TCP/IP has not been correctly installed on the host.
    • D、A local physical layer problem exists.

    正确答案:D

  • 第8题：

    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC.If a reply is received, what does this confirm?（）

    • A、The PC has connectivity with a local host.
    • B、The PC has connectivity with a Layer 3 device.
    • C、The PC has a default gateway correctly configured
    • D、The PC has connectivity up to Layer 5 of the OSI model
    • E、The PC has the TCP/IP protocol stack correctly installed.

    正确答案:E

  • 第9题：

    While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist（）。

    • A、the session layer
    • B、the protocol layer
    • C、the data link layer
    • D、the access layer
    • E、the network layer
    • F、the application layer

    正确答案:E

  • 第10题：

    单选题
    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?（）
    A

    data link layer

    B

    application layer

    C

    access layer

    D

    session layer

    E

    network layer


    正确答案： E
    解析： 暂无解析

  • 第11题：

    单选题
    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）
    A

    A remote physical layer problem exists.

    B

    The host NIC is not functioning.

    C

    TCP/IP has not been correctly installed on the host.

    D

    A local physical layer problem exists.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC. If a reply is received, what does this confirm?（）
    A

    The PC has connectivity with a local host.

    B

    The PC has connectivity with a Layer 3 device.

    C

    The PC has a default gateway correctly configured.

    D

    The PC has connectivity up to Layer 5 of the OSI model.

    E

    The PC has the TCP/IP protocol stack correctly installed.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    Which three of the following OSI model layers also belong to the TCP／IP model?()

    A. The application layer

    B. The session layer

    C. The data link layer

    D. The transport layer

    E. The network interface layer

    F. The physical layer


    参考答案：A, D, E

  • 第14题：

    A TestKing.com technician is troubleshooting connectivity problems between two routers that are directly connected through the serial line. The technician notices that the serial line is up but cannot see any neighbors displayed in the output of the show cdp neighbors command.In which OSI layer is the problem most likely occurring?（）

    A. Physical

    B. Data link

    C. Network layer

    D. Transport layer

    E. Application layer


    参考答案：B

  • 第15题：

    Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?()

    A.data link layer

    B.application layer

    C.access layer

    D.session layer

    E.network layer


    参考答案：E

  • 第16题：

    While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist（）。

    A.the session layer

    B.the protocol layer

    C.the data link layer

    D.the access layer

    E.the network layer

    F.the application layer


    参考答案：E

  • 第17题：

    A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the possibility of another device on the network having the same IP address. The technician should：（）

    • A、disconnect the MFD and ping the IP address.
    • B、disconnect the MFD and ping the subnet mask.
    • C、disconnect the MFD and ping the loopback address.
    • D、run the ipconfig command from the command prompt.

    正确答案:A

  • 第18题：

    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）

    • A、A remote physical layer problem exists.
    • B、The host NIC is not functioning.
    • C、TCP/IP has not been correctly installed on the host.
    • D、A local physical layer problem exists.

    正确答案:D

  • 第19题：

    A TestKing.com technician is troubleshooting connectivity problems between two routers that are directly connected through the serial line. The technician notices that the serial line is up but cannot see any neighbors displayed in the output of the show cdp neighbors command. In which OSI layer is the problem most likely occurring?（）

    • A、Physical
    • B、Data link
    • C、Network layer
    • D、Transport layer
    • E、Application layer

    正确答案:B

  • 第20题：

    While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?（）

    • A、The data link layer
    • B、The application layer
    • C、The access layer
    • D、The session layer
    • E、The network layer

    正确答案:E

  • 第21题：

    单选题
    While troubleshooting a network connectivity problem, a technician observes steady link lights on both the workstation NIC and the switch port to which the workstation is connected. However, when the ping command is issued from the workstation, the output message "Request timed out." is displayed. At which layer of the OSI model does the problem most likely exist?（）
    A

    the session layer

    B

    the protocol layer

    C

    the data link layer

    D

    the access layer

    E

    the network layer

    F

    the application layer


    正确答案： F
    解析： 暂无解析

  • 第22题：

    单选题
    While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?（）
    A

    The data link layer

    B

    The application layer

    C

    The access layer

    D

    The session layer

    E

    The network layer


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A TestKing.com technician is troubleshooting connectivity problems between two routers that are directly connected through the serial line. The technician notices that the serial line is up but cannot see any neighbors displayed in the output of the show cdp neighbors command. In which OSI layer is the problem most likely occurring?（）
    A

    Physical

    B

    Data link

    C

    Network layer

    D

    Transport layer

    E

    Application layer


    正确答案： A
    解析： 暂无解析

相关内容