itgle.com

When a switch port is used as a VLAN trunk, which of the following trunk modes are valid? (Select all that apply.)A. BlockingB. AutoC. DesirableD. OnE. TransparentF. Learning

题目

When a switch port is used as a VLAN trunk, which of the following trunk modes are valid? (Select all that apply.)

A. Blocking

B. Auto

C. Desirable

D. On

E. Transparent

F. Learning

相似考题

1.You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)A. Switch(vlan) mode trunkB. Switch(config) switchport access mode trunkC. Switch(config-if) switchport mode trunkD. Switch(config-if) switchport trunk encapsulation dot1qE. Switch(config) switchport access mode 1F. Switch(vlan) trunk encapsulation dot1q

2.When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?()A. All defined VLANs are allowed on the trunk by default.B. Each VLAN, or VLAN range, that is specified with the switchport mode command.C. Each VLAN, or VLAN range, that is specified with the vtp domain command.D. Each VLAN, or VLAN range, that is specified with the vlan database command.

3.Which commands, when used together, would create an 802.1Q link?()A. Switch(vlan)# mode trunkB. Switch(config)# switchport access mode trunkC. Switch(config-if)# switchport mode trunkD. Switch(config-if)# switchport trunk encapsulation dot1qE. Switch(config)# switchport access mode 1F. Switch(vlan)# trunk encapsulation dot1q

4.A new trunk has been configured on a switch in the Ezonexam LAN. By default, which VLANs are allowed over this trunk link?A. No VLANsB. Only the VLANs that are specified when creating the trunkC. Only VLANs 1-64D. All VLANsE. All VLAN's except VLAN 1F. None of the above

更多“When a switch port is used as a VLAN trunk, which of the following trunk modes are valid? (Select all that apply.)A. BlockingB. AutoC. DesirableD. OnE. TransparentF. Learning”相关问题

  • 第1题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?()

    A. All defined VLANs are allowed on the trunk by default.

    B. Each VLAN, or VLAN range, that is specified with the switchport mode command.

    C. Each VLAN, or VLAN range, that is specified with the vtp domain command.

    D. Each VLAN, or VLAN range, that is specified with the vlan database command.


    参考答案：C

  • 第2题：

    Which are valid modes for a switch port used as a VLAN trunk? ()

    A.transparent

    B.auto

    C.on

    D.desirable


    参考答案：B, C, D

  • 第3题：

    Which are valid modes for a switch port used as a VLAN trunk (Choose three.)()。

    A.transparent

    B.auto

    C.on

    D.desirable

    E.blocking

    F.forwarding


    参考答案：B, C, D

  • 第4题：

    Which commands, when used together, would create an 802.1Q link?（）

    • A、Switch(vlan)# mode trunk
    • B、Switch(config)# switchport access mode trunk
    • C、Switch(config-if)# switchport mode trunk
    • D、Switch(config-if)# switchport trunk encapsulation dot1q
    • E、Switch(config)# switchport access mode 1
    • F、Switch(vlan)# trunk encapsulation dot1q

    正确答案:C,D

  • 第5题：

    You are the network administrator tasked with designing a switching solution for the Company  network.  Which of the following statements describing trunk links are INCORRECT？（）

    • A、 The trunk link belongs to a specific VLAN.
    • B、 Multiple trunk links are used to connect multiple end user devices.
    • C、 A trunk link only supports native VLAN.
    • D、 Trunk links use 802.10 to identify a VLAN.
    • E、 The native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.

    正确答案:A,B,C,D

  • 第6题：

    Which are valid modes for a switch port used as a VLAN trunk (Choose three.)（）。

    • A、transparent
    • B、auto
    • C、on
    • D、desirable
    • E、blocking
    • F、forwarding

    正确答案:B,C,D

  • 第7题：

    A Cisco switch has this configuration for a port channel connecting to an ESXi using dual NICs and is intended for use with an N1Kv.  Interface fastethernet 1/10  Switchport mode trunk  Switchport trunk allowed vlan all  Channel-group 10 mode on  No shut  Interface fastethernet 1/11   Switchport mode trunk  Switchport trunk allowed vlan all  Channel-group 10 mode on  No shut  Interface port-channel 10   Switchport mode trunk  Switchport allowed vlan all No shut  Which Port Channel configuration must be used on the Nexus 1000v port-profile？（）

    • A、 MAC pinning
    • B、 Cisco Discovery Protocol pinning
    • C、 Mode On
    • D、 Mode Active
    • E、 No port channel configuration

    正确答案:C

  • 第8题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link（）。

    • A、no VLANs
    • B、all VLANs
    • C、only VLANs 1 - 64
    • D、only the VLANs that are specified when creating the trunk

    正确答案:B

  • 第9题：

    When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:A

  • 第10题：

    Which are valid modes for a switch port used as a VLAN trunk? （）

    • A、transparent
    • B、auto
    • C、on
    • D、desirable

    正确答案:B,C,D

  • 第11题：

    多选题
    You are the network administrator tasked with designing a switching solution for the Company  network.  Which of the following statements describing trunk links are INCORRECT？（）
    A

    The trunk link belongs to a specific VLAN.

    B

    Multiple trunk links are used to connect multiple end user devices.

    C

    A trunk link only supports native VLAN.

    D

    Trunk links use 802.10 to identify a VLAN.

    E

    The native VLAN of the trunk link is the VLAN that the trunk uses for untagged packets.


    正确答案： A,B,C,D
    解析： 暂无解析

  • 第12题：

    多选题
    When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）
    A

    Blocking

    B

    Auto

    C

    Desirable

    D

    On

    E

    Transparent

    F

    Learning


    正确答案： A,C
    解析： 暂无解析

  • 第13题：

    Which are valid modes for a switch port used as a VLAN trunk?()

    A.transparent

    B.auto

    C.on

    D.desirable

    E.blocking

    F.forwarding


    参考答案：B, C, D

  • 第14题：

    Which three statements about VTP features are true?()

    A.When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies

    B.Each broadcast domain on a switch can have its own unique VTP domain

    C.VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.

    D.When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.

    E.VTP pruning is used to increase available bandwidth in trunk links

    F.Client,server,and transparent are valid VTP modes

    G. To configure a switch to be part of two VTP domains,each domain must have its own passwords


    参考答案：A, E

  • 第15题：

    When a new trunk is configured on a 2950 switch, which VLANs by default are allowed over the trunk link()。

    A.no VLANs

    B.all VLANs

    C.only VLANs 1 - 64

    D.only the VLANs that are specified when creating the trunk


    参考答案：B

  • 第16题：

    Which three statements about VTP features are true?（）

    • A、When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
    • B、Each broadcast domain on a switch can have its own unique VTP domain
    • C、VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
    • D、When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
    • E、VTP pruning is used to increase available bandwidth in trunk links
    • F、Client,server,and transparent are valid VTP modes
    • G、To configure a switch to be part of two VTP domains,each domain must have its own passwords

    正确答案:A,E,F

  • 第17题：

    Which two of the following statements describe a routed switch port on a multilayer switch？（）

    • A、Layer 2 switching and Layer 3 routing are mutually supported.
    • B、The port will not be associated with any VLAN.
    • C、The routed switch port supports VLAN subinterfaces.
    • D、The routed switch port is used when a switch has only one port per VLAN or subnet.
    • E、The routed switch port ensures that STP remains in the forwarding state.

    正确答案:B,D

  • 第18题：

    A new switch is installed into an existing LAN and a new VTP trunk is set up with an existing switch. Which VLANs will be allowed on this new trunk?（）

    • A、All defined VLANs are allowed on the trunk by default.
    • B、Each VLAN, or VLAN range, that is specified with the switchport mode command.
    • C、Each VLAN, or VLAN range, that is specified with the vtp domain command.
    • D、Each VLAN, or VLAN range, that is specified with the vlan database command.

    正确答案:C

  • 第19题：

    Which are valid modes for a switch port used as a VLAN trunk?（）

    • A、transparent
    • B、auto
    • C、on
    • D、desirable
    • E、blocking
    • F、forwarding

    正确答案:B,C,D

  • 第20题：

    A switch port on TK1 is being configured to support 802.1Q trunking.  Which of the following are true about 802.1Q trunking？（）

    • A、Both switches must be in the same VTP domain.
    • B、The encapsulation type of both ends of the trunk does not have to match.
    • C、The native VLAN on both ends of the trunk must be VLAN 1.
    • D、802.1Q trunking can only be configured on a Layer 2 port.
    • E、In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.

    正确答案:E

  • 第21题：

    When a switch port is used as a VLAN trunk, which of the following trunk modes are valid?（）

    • A、Blocking
    • B、Auto
    • C、Desirable
    • D、On
    • E、Transparent
    • F、Learning

    正确答案:B,C,D

  • 第22题：

    多选题
    Which of the following are valid modes of accessing the data plane？ （Choose all that apply.）（）
    A

    Serial connection

    B

    Secure Shell

    C

    RADIUS

    D

    Simple Network Management Protocol

    E

    HTTP

    F

    Telnet


    正确答案： B,A
    解析： 暂无解析

  • 第23题：

    单选题
    A switch port on TK1 is being configured to support 802.1Q trunking.  Which of the following are true about 802.1Q trunking？（）
    A

    Both switches must be in the same VTP domain.

    B

    The encapsulation type of both ends of the trunk does not have to match.

    C

    The native VLAN on both ends of the trunk must be VLAN 1.

    D

    802.1Q trunking can only be configured on a Layer 2 port.

    E

    In 802.1Q trunking， all VLAN packets are tagged on the trunk link， except the native VLAN.


    正确答案： C
    解析： 暂无解析

相关内容