itgle.com

An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two)A. The switch mu

题目

An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two)

A. The switch must be reachable through a port connected to its management VLAN.

B. The switch console port must be connected to the Ethernet LAN.

C. The switch must be fully configured as an SNMP agent.

D. The switch must be configured with an IP address, subnet mask, and default gateway.

E. The switch management VLAN must be created and have a membership of at least one switch port.

F. The switch must be connected to a router over a VLAN trunk.

相似考题

1.The network administrator has configured port security on a Ezonexam switch. Why would a network administrator configure port security on this Ezonexam device?A．To prevent unauthorized hosts from getting access to the LANB．To limit the number of Layer 2 broadcasts on a particular switch portC．To prevent unauthorized Telnet or SSH access to a switch portD．To prevent the IP and MAC address of the switch and associated portsE．None of the above

2.As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such a situation, which three of the following connection modes will be available during the configuration process? （）(Choose three.)A. isolated modeB. modular modeC. community modeD. promiscuous modeE. non-isolatedF. permanent

3.You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）A. The switch name must match the workgroup name of the local network.B. The switch must be configured with an IP address and default gateway.C. The remote workstations must have access to the management VLAN of the switch.D. CDP must be enabled on the switch so that it can be located by other devices on the network.

4.Why would the Ezonexam administrator change the value of the spanning-tree priority of a switch?A. in order to optimize the path that frames take from source to destinationB. to increase the priority so a designated port will become a root portC. to increase the BID, so the switch is more likely to become root bridgeD. in order to allow VLANs to be sent from one switch to another across a single linkE. to force a given switch to become an STP serverF. None of the above

参考答案和解析
正确答案：AD
A,D 解析：Explanation:
In order the telnet to any Cisco device, the device must be reachable from the remote location. For a Cisco switch to be reachable from remote locations, it must have an IP address, subnet mask, and default gateway assigned.

Communication with the switch management interfaces is through the switch IP address.
The IP address is associated with the management VLAN, which by default is VLAN 1
更多“An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two)A. The switch mu”相关问题

  • 第1题：

    Why would an administrator change the value of the spanning－tree priority of a switch?()

    A. in order to optimize the path that frames take from source to destination

    B. to increase the priority so a designated port will become a root port

    C. to increase the BID, so the switch is more likely to become root bridge

    D. in order to allow VLANs to be sent from one switch to another across a single link

    E. to force a given switch to become an STP server


    参考答案：A

  • 第2题：

    A system administrator installed a new switch using a script to configure it. IP connectivity was tested using pings to SwitchB. Later attempts to access NewSwitch using Telnet from SwitchA failed. Which statement is true?（）

    A. Executing password recovery is required.

    B. The virtual terminal lines are misconfigured.

    C. Use Telnet to connect to RouterA and then to NewSwitch to correct the error.

    D. Power cycle of NewSwitch will return it to a default configuration.


    参考答案：B

  • 第3题：

    Why would a network administrator configure port security on a switch?（）

    • A、To prevent unauthorized Telnet access to a switch port.
    • B、To limit the number of Layer 2 broadcasts on a particular switch port.
    • C、To prevent unauthorized hosts from accessing the LAN.
    • D、To protect the IP and MAC address of the switch and associated ports.
    • E、To block unauthorized access to the switch management interfaces over common TCP ports.

    正确答案:C

  • 第4题：

    Why would an administrator change the value of the spanning-tree priority of a switch?（）

    • A、in order to optimize the path that frames take from source to destination
    • B、to increase the priority so a designated port will become a root port
    • C、to increase the BID, so the switch is more likely to become root bridge
    • D、in order to allow VLANs to be sent from one switch to another across a single link
    • E、to force a given switch to become an STP server

    正确答案:A

  • 第5题：

    As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such a situation, which three of the following connection modes will be available during the configuration process? （）(Choose three.)

    • A、isolated mode
    • B、modular mode
    • C、community mode
    • D、promiscuous mode
    • E、non-isolated
    • F、permanent

    正确答案:A,C,D

  • 第6题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第7题：

    Multiple users call from the same location saying that they have no network connectivity. The administrator is unable to ping the main switch at that IDF. Which of the following configuration management documents would the administrator MOST likely consult to troubleshoot the issue?（）

    • A、Baseline configuration
    • B、Security policy
    • C、Performance and transaction logs
    • D、Physical network diagram

    正确答案:D

  • 第8题：

    An administrator is looking for the "Open RestrictedShell Terminal" option on the HMC GUI. Under which panel is this option available?（）

    • A、HMC Management, but only from a local connection.
    • B、Service Management, but only from a local connection.
    • C、Systems Management, but only from a local connection.
    • D、Systems Management, but only from a remote connection.

    正确答案:A

  • 第9题：

    单选题
    Why would a network administrator configure port security on a switch?（）
    A

    to prevent unauthorized Telnet access to a switch port

    B

    to limit the number of Layer 2 broadcasts on a particular switch port

    C

    to prevent unauthorized hosts from accessing the LAN

    D

    to protect the IP and MAC address of the switch and associated ports

    E

    to block unauthorized access to the switch management interfaces over common TCP ports


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    Why would an administrator change the value of the spanning-tree priority of a switch?（）
    A

    in order to optimize the path that frames take from source to destination

    B

    to increase the priority so a designated port will become a root port

    C

    to increase the BID, so the switch is more likely to become root bridge

    D

    in order to allow VLANs to be sent from one switch to another across a single link

    E

    to force a given switch to become an STP server


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Why would a network administrator configure port security on a switch?（）
    A

    To prevent unauthorized Telnet access to a switch port.

    B

    To limit the number of Layer 2 broadcasts on a particular switch port.

    C

    To prevent unauthorized hosts from accessing the LAN.

    D

    To protect the IP and MAC address of the switch and associated ports.

    E

    To block unauthorized access to the switch management interfaces over common TCP ports.


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）
    A

    Reverse ARP

    B

    Full duplex on the fiber link

    C

    PoE

    D

    802.1q trunking


    正确答案： B
    解析： 暂无解析

  • 第13题：

    Why would a network administrator configure port security on a switch?()

    A. To prevent unauthorized Telnet access to a switch port.

    B. To limit the number of Layer 2 broadcasts on a particular switch port.

    C. To prevent unauthorized hosts from accessing the LAN.

    D. To protect the IP and MAC address of the switch and associated ports.

    E. To block unauthorized access to the switch management interfaces over common TCP ports.


    参考答案：C

  • 第14题：

    Why would a network administrator configure port security on a switch()。

    A.to prevent unauthorized Telnet access to a switch port

    B.to limit the number of Layer 2 broadcasts on a particular switch port

    C.to prevent unauthorized hosts from accessing the LAN

    D.to protect the IP and MAC address of the switch and associated ports

    E.to block unauthorized access to the switch management interfaces over common TCP ports


    参考答案：C

  • 第15题：

    Why would a network administrator configure port security on a switch?（）

    • A、to prevent unauthorized Telnet access to a switch port
    • B、to limit the number of Layer 2 broadcasts on a particular switch port
    • C、to prevent unauthorized hosts from accessing the LAN
    • D、to protect the IP and MAC address of the switch and associated ports
    • E、to block unauthorized access to the switch management interfaces over common TCP ports

    正确答案:C

  • 第16题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）

    • A、The switch must be configured with an IP address,subnet mask,and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch port.
    • F、The switch must be fully configured as an SNMP agent.

    正确答案:A,C

  • 第17题：

    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）

    • A、The switch must be configured with an IP address, subnet mask, and default gateway.
    • B、The switch must be connected to a router over a VLAN trunk.
    • C、The switch must be reachable through a port connected to its management VLAN.
    • D、The switch console port must be connected to the Ethernet LAN.
    • E、The switch management VLAN must be created and have a membership of at least one switch

    正确答案:A,C

  • 第18题：

    Switch A is configured with VLAN 105 and 106. Switch Bis configured with VLAN 105 and 107.Both switches are connected with a fiber cable. In order for packets from all VLANs to cross thefiber cable, which of the following configurations MUST be present? （）

    • A、Reverse ARP
    • B、Full duplex on the fiber link
    • C、PoE
    • D、802.1q trunking

    正确答案:D

  • 第19题：

    An administrator is looking for the "Open Restricted Shell Terminal" option on the HMC GUI. Under which panel is this option available？（） 

    • A、HMC Management， but only from a local connection
    • B、Service Management， but only from a local connection.
    • C、Systems Management， but only from a local connection.
    • D、Systems Management， but only from a remote connection.

    正确答案:A

  • 第20题：

    多选题
    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
    A

    The switch name must match the workgroup name of the local network.

    B

    The switch must be configured with an IP address and default gateway.

    C

    The remote workstations must have access to the management VLAN of the switch.

    D

    CDP must be enabled on the switch so that it can be located by other devices on the network.


    正确答案： D,B
    解析： 暂无解析

  • 第21题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
    A

    The switch must be configured with an IP address, subnet mask, and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch


    正确答案： A,B
    解析： 暂无解析

  • 第22题：

    多选题
    An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location？ （）
    A

    The switch must be configured with an IP address,subnet mask,and default gateway.

    B

    The switch must be connected to a router over a VLAN trunk.

    C

    The switch must be reachable through a port connected to its management VLAN.

    D

    The switch console port must be connected to the Ethernet LAN.

    E

    The switch management VLAN must be created and have a membership of at least one switch port.

    F

    The switch must be fully configured as an SNMP agent.


    正确答案： B,D
    解析： 暂无解析

  • 第23题：

    多选题
    As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such a situation, which three of the following connection modes will be available during the configuration process? （）(Choose three.)
    A

    isolated mode

    B

    modular mode

    C

    community mode

    D

    promiscuous mode

    E

    non-isolated

    F

    permanent


    正确答案： F,C
    解析： 暂无解析

相关内容