itgle.com

Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.Several laser prin

题目

Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.

Several laser print devices are attached to the UNIX computers. You want to enable the Windows 2000 Professional computers to print to these printers. You want to make the minimum number of configuration changes necessary to achieve this goal.

What should you do?

A．Install Simple TCP/IP services on the Windows 2000 Server computer. Configure printers on the Windows 2000 Server computer to print to the print device attached to the UNIX computers.

B．Install Print Services for UNIX on the Windows 2000 Server computer. Configure shared printers on the Windows 2000 Server computer. Configure the UNIX computers to print to these shared printers.

C．Disconnect the print devices from the UNIX computers and connect them to the Windows 2000 Server computer. Share the printers, and configure the Windows 2000 Professional computers and the UNIX computers to print to the shared printers.

D．On the Windows 2000 Server computer, configure shared printers that connect to the print devices attached to the UNIX computers. Configure the Windows 2000 Professional computers to print to the shared printers on the Windows 2000 Server computer.

相似考题

1.You are the administrator of your company's network. Your network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers. You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations.You want to accomplish the following goals:1. An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.2. Existing user environments will be maintained on the Windows 2000 Professional computers.3. The network name of each Windows 2000 Professional computer will be changed to match its asset tag.4. The RIS image and the upgraded applications will be enabled as they are added to the network.You take the following actions:1. Install the RIS image on a Windows 2000 Professional computer named Computer1.2. Install the upgraded applications on Computers1.3. Change the network name of Computer1 to %DMI-SERIAL_NUM%.4. Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server.5. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.Which result or results do these actions produce? (Choose all that apply.)A．An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.B．Existing user environments will be maintained on the Windows 2000 Professional computers.C．The network name of each Windows 2000 Professional computer will be changed to match its asset tag.D．The RIS image and the upgraded applications will be enabled as they are added to the network.

2.You are the administrator of your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 10 non-PXE-compliant computers that are on the marketing segment of your network. You start one of the computers by using a RIS boot disk. However, you cannot connect to the RIS server.You verify that the existing client computers on the network can connect to network servers, including the RIS server. The network router does not support BOOTP, so existing client computers use manually configured TCP/IP addresses. You want to enable the computers to connect to the RIS server.What should you do?A．Add a computer running DHCP Relay Agent to the marketing segment.B．Add a computer running the network monitor driver to the marketing segment.C．Move the Windows 2000 Server computer running WINS to the marketing segment.D．Move the Windows 2000 Server computer running Active Directory to the marketing segment.

3.You work as one of ten network administrators at theBostonoffice of Ezonexam.com.The Ezonexam.com network includes Windows 2000 Professional client computer, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Ezonexam employees who use the Windows operating systems stores files on a shared folders on a Windows 2000 Server computer that is named EzonexamFileServerA.You are now required to make the shared folders on EzonexamFileServerA available for the Ezonexam staff that uses UNIX computers.What action should you take?A．Install and configure NFS (Network File System) on EzonexamFileServerA.B．Configure data volumes on EzonexamFileServerA to be FAT volumes.C．Disable Server Message Block (SMB) signing on EzonexamFileServerA.D．Install Simple TCP/IP Services on EzonexamFileServerA.

4.The network consists of a single domain named Ezonexam.com that includes 20 Windows NT workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers. You install Terminal Services on one of the Windows Server computers and Terminal Services Client on the 20 Windows NT Workstation 4.0 client computers. You create a system policy on the server that is configured as the terminal server. This system policy denies access to Network Neighborhood. You find that the users of the terminal server can still browse the network when they open My Network Places from Windows 2000 Professional computer or when they open Network Neighborhood from Windows NT Workstation 4.0 computers.You want to prevent all users from browsing the network.What should you do? (Each correct answer presents a complete solution. Choose two.)A．Create a Windows Group Policy that denies user access to My Network Places.B．Copy the Windows NT policy file to the 20 Windows NT Workstation 4.0 computers.C．Create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator.D．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the terminal server.E．Configure the terminal server to use Application server mode. Select the Permissions compatible with Terminal Server 4.0 Users option.

更多“Ezonexam.com's network consists of Windows 2000 Professional and UNIX client computers. You install a Windows 2000 Server computer on the network. All computers that are connected to the network use TCP/IP as their only network protocol.Several laser prin”相关问题

  • 第1题：

    Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 95 client computers and UNIX client computers. Users of the Windows operating systems send print jobs to shared printers on a Windows 2000 Server computer named PrintServ. The UNIX client computers support the LPR printing protocol.

    You want to make the shared printers on PrintServ available to the UNIX computers. What should you do?

    A．Configure each of the printers to use an LPR port.

    B．Install Microsoft Print Services for UNIX on PrintServ.

    C．Configure each of the printers to support TCP/IP printing.

    D．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.


    正确答案：B
    解析：Explanation: Microsoft Print Services for UNIX enables UNIX clients to use Windows 2000 printers through the UNIX LPR protocol.

    Incorrect answers:
    A: Windows 2000 does not support an LPR port in Windows 2000 printer configuration.

    C: We only know that the UNIX clients support the LPR protocol. We do not know if they support TCP/IP printing.

    D: The Srvany.exe utility allows any Windows NT application to run as a service. This would not help in any way in this scenario.

  • 第2题：

    You are the administrator for Ezonexam's network.

    Your network includes Windows 2000 Professional client computers, Windows 2000 Server computers, Windows XP Professional computers, and UNIX client computers. Users of the UNIX operating system send print jobs to shared printers on a UNIX computer named PrintServ.

    You want to make the shared printers on PrintServ available to the Windows 2000 Professional computers, the Windows 2000 Server computers and the Windows XP Professional computers.

    What should you do?

    A．Use the SRVANY utility from the Windows NT Resource Kit to run the LPR program as a service.

    B．Configure each of the printers to support TCP/IP printing.

    C．Create an LPR port on each client that is configured to use PrintServ.

    D．Configure each of the printers to use LPR port


    正确答案：C
    解析：Explanation: When the Print Services have been installed, UNIX clients will be able to connect to any of your printers. In addition, you will be able to add an LPR port on your server to redirect print jobs to an LPD service hosted on a UNIX computer. When installed on this port, a printer will be able to be shared on your server and will appear as any other printer to your Windows clients. All jobs submitted to it will be forwarded to a spooler on the UNIX server. In addition, UNIX clients will be able to connect to the IP address of the Windows 2000 UNIX Print server and then to the specific queue.

    Incorrect answers:
    A: This will not allow the UNIX clients to make use of the printer.

    B: This option presupposes that the printers are TCP/IP capable printers. The disadvantage of this is that you do not get the benefits of Windows 2000 printer security, scheduling, or administration. In order to support the UNIX clients you need to create an LPR port on each client.

    D: This is impractical. All that is necessary is to create an LPR port on each client that is configured to use PrintServ.

  • 第3题：

    You are the administrator for Ezonexam.com's network.

    Your network includes Windows 2000 Professional client computers, Windows NT Workstation 4.0 client computers, Windows 98 client computers, and UNIX client computers. Users of the Windows operating systems store files on shared folders on a Windows 2000 Server computer named FileServ.

    You want to make the shared folders on FileServ available to the UNIX computers.

    What should you do?

    A．Install and configure Network File System (NFS) on FileServ.

    B．Configure data volumes on FileServ to be FAT volumes.

    C．Disable Server Message Block (SMB) signing on FileServ.

    D．Install Simple TCP/IP Services on FileServ.


    正确答案：A
    解析：Explanation:ClickingMicrosoftWindowsNetworktellsyoursoftwarethatyouwanttousetheClientforMicrosoftNetworks,insteadofsomeotherinstalledclient,tofindservers.Forinstance,iftheNetwareclientwereinstalled,youwouldselectNetwareNetworkfromthebrowselisttosearchforNetwareservers.IfaUnixclientwerepresent(thereareanumberoftheseonthemarket),anoptionthatprobablyincludesthetermNFSwouldshowuponthelist.YouwouldselectittolookforserversrunningtheNFSfileserversoftware.IfyouinstallandconfigureNFSonFileServ,thenyouwillsupportUNIXcomputersaswell.Incorrectanswers:B:ConfiguringFATvolumeswillnotallowUNIXcomputerstoaccessthesharedfolders.C:ThisisnotaServerMessageBlocksigningissue.D:InstallingSimpleTCP/IPServicesonFileServisnotgoingtoavailthesharedfoldertoUNIXcomputers.

  • 第4题：

    You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

    • A、Configure a DNS suffix.
    • B、Configure a subnet mask.
    • C、Configure an LMHOSTS file.
    • D、Configure an Interface metric.
    • E、Configure at least one DNS address.

    正确答案:B,E

  • 第5题：

    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）

    • A、The bindings.
    • B、A DNS address.
    • C、A Gateway address.
    • D、A WINS server address.
    • E、A DHCP server address.

    正确答案:C,D

  • 第6题：

    You are the administrator of your company’s network. You network has five Windows 2000 server computers and 75 Windows 2000 Professional computers. The Windows 2000 Professional computers were installed by using a RIS image on one of the Windows 2000 Server computers.  You need to upgrade several applications on the Windows 2000 Professional computers. The applications do not have built-in support for scripted installations. You want to accomplish the following goals:   An unattended installation of the upgraded applications will be performed on the Windows 20000 Professional computers. Existing user environments will be maintained on the Windows 2000 Professional computers. The network name of each Windows 2000 Professional computer will be changed to match its asset tag. The RIS image and the upgraded applications will be enabled as they are added to the network. You take the following actions: Install the RIS image on a Windows 20000 Professional computer named Computer1. Install the upgraded applications on Computers1. Change the network name of Computer1 to %DMI-SERIAL_NUM%.  Run RIPrep.exe on Computer1 to load the RIS image on to the RIS server. Start all of the Windows 2000 Professional computers, and then load the RIS image from the RIS server.  Which result or results do these actions produce?（　）

    • A、An unattended installation of the upgraded applications will be performed on the Windows 2000 Professional computers.
    • B、Existing user environments will be maintained on the Windows 2000 Professional computers.
    • C、The network name of each Windows 2000 Professional computer will be changed to matchIts asset tag.
    • D、The RIS image and the upgraded applications will be enabled as they are added to the N.etwork.

    正确答案:A,D

  • 第7题：

    You are the administrator of Company.com’s Windows 2000 Network.  Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer.   You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）

    • A、Configure a HOSTS file.
    • B、Configure a LMHOSTS file.
    • C、Configure a WINS server database.
    • D、Configure a DHCP server address.
    • E、Configure at least one DNS address.

    正确答案:A,E

  • 第8题：

    The network at Company Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000Professional computers. The Company network consists of five interconnected TCP/IP subnets. All of thecomputers use TCP/IP as the only network protocol.You are adding 15 Windows 2000 Professional computers to the network. You want to enable theWindows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.What should you do？ （）

    • A、Install a DHCP server. Configure each computer to use DHCP. 
    • B、Install a WINS server. Configure each computer to use WINS. 
    • C、Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and  NetBIOS name for each computer on the network. 
    • D、Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network. 

    正确答案:B

  • 第9题：

    You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers.   According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network.   You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network.  What should you do？ （）

    • A、 On each domain controller, disable Server Message Block (SMB) signing and encryption of the secure channel traffic.  
    • B、 Replace all Windows 98 computers with new Windows XP Professional computers.  
    • C、 Install the Active Directory Client Extensions software on the Windows 98 computers. 
    • D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.

    正确答案:B

  • 第10题：

    单选题
    You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）
    A

    Install a DHCP server.

    B

    Install a WINS server. Configure each computer to use WINS.

    C

    Create an Lmhost file on each computer.

    D

    Create a Hosts file on each computer.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    You are the network administrator for Company.  Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers  to the network.   You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet.    You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72   You want to enable the Windows 2000 Professional computers to communicate outside their own subnet.   What should you do?（）
    A

    Install a DHCP server.

    B

    Install a WINS server. Configure each computer to use WINS.

    C

    Create an Lmhost file on each computer.

    D

    Create a Hosts file on each computer.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    You are the administrator of a Windows 2000 network.  The network has 100 Windows 2000 Professional computers. A graphics application was assigned to all the computers on the network by using a Group Policy object (GPO).  You deploy a service release for the graphics application to all of the Windows 2000 Professional computers on the network. The service release, in addition to other software that had been assigned, fails to install on only one of the computers.   What should you do?（）
    A

    Restart Windows Installer on the domain controller.

    B

    Restart Windows Installer on the computer that failed to install the service release.

    C

    Redeploy the service release by using an .mst file.

    D

    Redeploy the service release by using a .zap file.


    正确答案： C
    解析： 暂无解析

  • 第13题：

    You are the administrator of a Windows 2000 Active Directory network. The network consists of a single domain. The domain includes 20 Windows NT Workstation 4.0 client computers. All other client computers are Windows 2000 Professional computers.

    You create a Windows NT 4.0 default user policy on the Windows 2000 Server computer that is configured as the PDC emulator. This default user policy denies access to Network Neighborhood. You then install Terminal Services on one of the servers and Terminal Services Client on the 20 Windows NT Workstation client computers.

    You find that the users of the Terminal Server can still browse the network when they open My Network Places. You want to prevent all users from browsing the network.

    What should you do?

    A．Modify the Windows NT policy template file so that you can restrict access to both My Network Places and Network Neighborhood. Save the policy file on the Terminal Server.

    B．Copy the Windows NT policy file to the 20 Windows NT Workstation computers.

    C．Create a Windows 2000 Group Policy that denies user access to My Network Places.

    D．Edit the local registry on the Windows NT Workstation computers to deny access to Entire Network in Network Neighborhood.


    正确答案：C
    解析：Explanation: Windows NT 4.0 system polices affect computers running Windows NT 4.0. The Windows NT computers in this scenario are being used as Terminals for the Windows 2000 Server computer that is running Terminal Services. In effect the Windows NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server. This can be done by using a group policy.

    Incorrect answers:
    A: System policy templates only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

    B: Windows NT policies only affect Windows NT 4.0 computers. The restriction must be applied on the Windows 2000 Server.

    D: The NT clients are running locally on the Windows 2000 Server. The restriction must be applied on the Windows 2000 Server.

  • 第14题：

    You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers. You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically.

    You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.

    What should you do?

    A．Configure the DHCP scope to add additional IP addresses.

    B．Run Rbfg.exe from the RemoteInstall\Admin folder on the RIS server.

    C．Modify the startup sequence in the CMOS of the remaining computers.

    D．Create computer accounts on the remaining computers in the Active Directory.


    正确答案：A
    解析：Explanation: RIS requires Active Directory, DNS and DHCP. The clients can either be PXE-compliant or they can use a Remote boot diskette. In this scenario, the DHCP server has run out of IP-addresses. By extending the scope by 40 IP addresses the installation on the remaining computers will be successful.

    Incorrect Answers:
    B: Rbfg.exe is used to create Remote Boot disks for computers that do not have PXE-compliant network cards. In this scenario, all clients are PXE-compliant and will thus be able to boot through the network and access the RIS image. It is thus not necessary to create Remote Boot disks.

    C: The 50 new computers have identical hardware. There installation worked on 10 of the new computers. There can thus be no incorrect startup sequence setting in CMOS.

    D: In this situation there is no need for prestaged computer accounts in Active Directory. Pre-staged computer accounts are used to select between RIS servers. By configuring the RIS server to answer only known client computers it would require user accounts for all RIS clients. This is not the default setting.

  • 第15题：

    You are the administrator of a Windows 2000 network. Your network includes 75 Windows NT Workstation 4.0 computers.  You are adding 50 new PXE-compliant computers to the network. The hardware on each computer is configured identically. You are using a RIS image to deploy Windows 2000 Professional to the 50 computers. You successfully install Windows 2000 Professional on the first 10 computers. However, you cannot install Windows 2000 Professional on remaining 40 computers.  What should you do?（）

    • A、Configure the DHCP scope to add additional IP addresses.
    • B、Run Rbfg.exe from the RemoteInstall/Admin folder on the RIS server.
    • C、Modify the startup sequence in the CMOS of the remaining computers.
    • D、Create computer accounts on the remaining computers in the active directory.

    正确答案:A

  • 第16题：

    You are the network administrator for Company.  Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers  to the network.   You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet.    You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72   You want to enable the Windows 2000 Professional computers to communicate outside their own subnet.   What should you do?（）

    • A、Install a DHCP server.
    • B、Install a WINS server. Configure each computer to use WINS.
    • C、Create an Lmhost file on each computer.
    • D、Create a Hosts file on each computer.

    正确答案:A

  • 第17题：

    You are a network administrator for your company. All domain controllers run Windows Server 2003. The network contains 50 Windows 98 client computers， 300 Windows 2000 Professional computers， and 150 Windows XP Professional computers.   According to the network design specification， the Kerberos version 5 authentication protocol must be used for all client computers on the internal network.   You need to ensure that Kerberos version 5 authentication is used for all client computers on the internal network.   What should you do？  （）

    • A、 On each domain controller， disable Server Message Block （SMB） signing and encryption of the secure channel traffic.
    • B、 Replace all Windows 98 computers with new Windows XP Professional computers.
    • C、 Install the Active Directory Client Extensions software on the Windows 98 computers.
    • D、 Upgrade all Windows 98 computers to Windows NT Workstation 4.0.

    正确答案:B

  • 第18题：

    You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）

    • A、Ask a domain administrator to authorize the RIS server. 
    • B、Grant the Everyone group Allow - Read NTFS permission on the RIS image.
    • C、Install RIS on the domain controller. Copy the RIS image to the domain controller.
    • D、Add a reservation for the RIS server to the DHCP server. 

    正确答案:A

  • 第19题：

    You are the administrator of WXYZ.com Incorporation. Your company’s network consists of Windows 2000 Professional clients and Windows 2000 Servers. Users have started reporting that the network performance has degraded in recent times. Most of the Windows 2000 Professional clients on your network use the TCP/IP protocol to communicate with the Server. You want to increase network performance. Where do you change the binding order？（）

    • A、Windows 2000 Server >> Network >> Binding >> Server >> TCP/IP on the top.
    • B、Windows 2000 Server >> Network >> Binding >> Workstation >> TCP/IP on the top.
    • C、Windows 2000 Professional >> Network >> Binding >> Server >> TCP/IP on the top.
    • D、Windows 2000 Professional >> Network >> Binding >> Server >> TCP/IP on the bottom.
    • E、Windows 2000 Professional >> Network >> Binding >> Workstation >> TCP/IP on the top.
    • F、Windows 2000 Professional >> Network >> Binding >> Workstation >> TCP/IP on thebottom.

    正确答案:E

  • 第20题：

    You are the administrator of a Windows 2000 Professional network that has 1500 Windows 2000 Professional computers. Microsoft Office 2000 was installed to all the computers over the network by using Group Policy Object. You deploy an Office 2000 service release to all the Windows 2000 Professional computers on the network. The service release in addition to other software that had been assigned fails to install on only one of the computer. What should you do？（）

    • A、Re-deploy the service release by using a .ZAP file. 
    • B、Re-deploy the service release by using a .MST file. 
    • C、Restart windows installer on the domain controller. 
    • D、Restart windows installer on the computer that failed to install the service release. 
    • E、Restart Windows installer and use an .MSP file. 

    正确答案:D

  • 第21题：

    多选题
    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）
    A

    The bindings.

    B

    A DNS address.

    C

    A Gateway address.

    D

    A WINS server address.

    E

    A DHCP server address.


    正确答案： C,D
    解析： 暂无解析

  • 第22题：

    单选题
    You are the desktop administrator for one of your company's branch offices. The network in the branch office consists of a single network segment, which contains a domain controller, a DHCP server, 10 Windows 2000 Server computers, and 50 Windows 2000 Professional computers. All servers and client computers are members of the company's Active Directory domain. You purchase 50 new client computers for the branch office. Each new client computer contains a built-in PXE-compliant network adapter. You install and configure RIS on one of the Windows 2000 Server computers that is on the network in the branch office. You create a Windows XP Professional RIS image on the Windows 2000 Server computer. You connect the new client computers to the network in the office, and you turn on each computer. Each computer displays a message stating that it cannot contact a PXE boot server. You verify that the RIS server is connected to the network. You need to ensure that the new client computers can connect to the RIS server and can begin installing Windows XP Professional. What should you do?（）
    A

    Ask a domain administrator to authorize the RIS server. 

    B

    Grant the Everyone group Allow - Read NTFS permission on the RIS image.

    C

    Install RIS on the domain controller. Copy the RIS image to the domain controller.

    D

    Add a reservation for the RIS server to the DHCP server. 


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    The network at Company Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000Professional computers. The Company network consists of five interconnected TCP/IP subnets. All of thecomputers use TCP/IP as the only network protocol.You are adding 15 Windows 2000 Professional computers to the network. You want to enable theWindows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.What should you do？ （）
    A

    Install a DHCP server. Configure each computer to use DHCP. 

    B

    Install a WINS server. Configure each computer to use WINS. 

    C

    Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and  NetBIOS name for each computer on the network. 

    D

    Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network. 


    正确答案： C
    解析： 暂无解析

相关内容