itgle.com

单选题A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following

题目
单选题
A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）
A

You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 

B

Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 

C

Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch

D

The NPIV switch will count against the number of domains in a fabric

相似考题

1.A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）A. operator trainingB. cache size of the two clustersC. fibre bandwidth capability between the sitesD. number of stacked tape drives attached to each cluster

2. A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）A、4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server B、Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module C、Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module D、Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server

3.A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）A、Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet SwitchB、Using blade servers with the NPIV switch will require morefibre ports on the external fibre switchC、Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.D、The NPIV switch will count against the number of domains in a fabric

4. A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）A、4B、3C、2D、8

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following”相关问题

  • 第1题：

    A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）

    • A、operator training
    • B、cache size of the two clusters
    • C、fibre bandwidth capability between the sites
    • D、number of stacked tape drives attached to each cluster

    正确答案:C

  • 第2题：

    A customer wants to expand their current storage environment, but has floor space for only two machine frames or two racks. Their environment consists of IBM SAN Volume Controllers and IBM DS4000 systems. The DS4000 systems are at end of lease. The customer wants the maximum number of disks possible in two frames. Which of the following solutions is best for this customer?（）

    • A、add one SVC
    • B、install one DS8700
    • C、install one DS8800
    • D、install one XIV system

    正确答案:C

  • 第3题：

    A customer is interested in a power efficient server solution. The Sales Specialist has recommended a BladeCenter solution. The customer debates the price is high compared to rack servers.  Which of the following should the Sales Specialist emphasize to address the pricing difference？（）

    • A、Higher rack density that reduces data center footprints
    • B、Internal upgrades that only IBM can offer
    • C、Total Cost of Ownership （TCO） related to innovative components such as Integrated Switches 
    • D、The Rear Door Heat eXchanger that only IBM can offer

    正确答案:C

  • 第4题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）

    • A、You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 
    • B、Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 
    • C、Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch
    • D、The NPIV switch will count against the number of domains in a fabric

    正确答案:C

  • 第5题：

    A customer wants to improve the utilization of the current capacity of their existing N series Tier 1production storage. What solution would the storage specialist discuss with the customer?（）

    • A、 compression with IBM Real-time Compression Appliances 
    • B、 deduplication with IBM ProtecTIER 
    • C、 virtualization with IBM SVC 
    • D、 file virtualization with SONAS

    正确答案:D

  • 第6题：

    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the internal fibre switches. Consequently. the customer wants to use the Optical Pass-Thru Module （OPM）.  What TRUE statement should be mentioned to the customer regarding the OPM？（）

    • A、You can not put the Optical Pass-Thru Module in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch.
    • B、Using blade servers with the Optical Pass-Thru Module will require more fibre ports on the external fibre switch.
    • C、The Optical Pass-Thru Module does not provide the customer with an opportunity to reuse their fibre switch.
    • D、The blade servers do not work with the Optical Pass-Thru Module.

    正确答案:B

  • 第7题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently, the customer is considering an N_Port ID Virtualization (NPIV) capable switch.Which of the following should be mentioned to the customer regarding the NPIV switch?（）
    A

    You can not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch 

    B

    Using blade servers with the NPIV switch will require more fibre ports on the external fibre switch 

    C

    Storage devices like Fibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A customer wants to realize a server-based computing scenario for trading floor applications with IBM BladeCenter. The customer expects the solution to offer high security and manageability， while delivering hardware-based graphics compression and full USB capability.  Is this possible？（）
    A

    A

    B

    B

    C

    C

    D

    D


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    A customer is considering BladeCenter H and S chassis. Which of the following is a reason to implement BladeCenter H？（）
    A

    Support for10Gb internal network

    B

    Support for SSD

    C

    Support for integrated disk drives

    D

    Support for8Gb FC Switch Modules


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A banking customer orders three IBM BladeCenter E chassis and thirty-four HS22 blades. The customer wants to fully populate the chassis with blades where possible. Which of the following is the minimum number of power cables required to provide redundancy？（）
    A

    6

    B

    8

    C

    10

    D

    12


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A manufacturing customer has an IBM BladeCenter H chassis with four， HX5 with MAX5 4-socket blades installed. Each blade has the optional Fibre Channel Expansion card. The customer wants redundancy and is going to install the following configuration：  （1）two Brocade 20-Port SAN Switch Modules  （2）two Nortel Networks 1/10 GB Uplink ESM  （3）a redundant AMM  What is the minimum number of power supplies needed for this configuration to have full redundancy？（）
    A

    4

    B

    3

    C

    2

    D

    8


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）
    A

    Fibre Channel Expansion Card for each Blade Server

    B

    cKVM Card for each Blade Server

    C

    iSCSI Expansion Card for each Blade Server

    D

    4Gb Modular Flash Drive


    正确答案： B
    解析： 暂无解析

  • 第13题：

    A customer is interested in reducing energy consumption and infrastructure consolidation for space. The customer needs a maximum of 14 servers in 7U rack.  Which IBM BladeCenter Chassis should be recommended？ （）

    • A、BladeCenter E
    • B、BladeCenter H
    • C、BladeCenter T
    • D、BladeCenter HT

    正确答案:A

  • 第14题：

    A customer wants to boot from an iSCSI SAN with their IBM BladeCenter infrastructure running Microsoft Windows Server 2000.  What is required for the customer to be able to perform this？（）

    • A、Fibre Channel Expansion Card for each Blade Server
    • B、cKVM Card for each Blade Server
    • C、iSCSI Expansion Card for each Blade Server
    • D、4Gb Modular Flash Drive

    正确答案:C

  • 第15题：

    While installing a new IBM System Storage DS5100 into a customer’s data center， it is discoveredthat the customer does not have enough available Fibre Channel ports on their switches. Which ofthe following should have been used to avoid this situation？（）

    • A、IBM DS5000 Cabling Tool
    • B、IBM e-Configurator Tool
    • C、IBM Pre-Installation TDA Checklist
    • D、IBM Standalone Solutions Configuration Tool

    正确答案:C

  • 第16题：

    A medical customer wants to deploy around 8TB integrated storage on a BladeCenter.Which of the following should be discussed with this customer？（）

    • A、SATA internal disks
    • B、iSCSI
    • C、Solid State Storage
    • D、SAS Internal Disk

    正确答案:A

  • 第17题：

    A customer has the following equipment installed in their data center：  （1）an IBM BladeCenter H chassis （2）two power supplies  （3）six HS22V blades （4）three Nortel 1/10 GB ESMs The retail customer purchased a new HX5 with MAX5.  Which of the following must be added to install the HX5 with MAX5？（）

    • A、Two additional power supplies
    • B、Fibre Channel （FC） switches and SAN storage
    • C、A Nortel 1/10 GB ESM
    • D、SSD for the HX5

    正确答案:A

  • 第18题：

    A customer is considering BladeCenter H and S chassis. Which of the following is a reason to implement BladeCenter H？（）

    • A、Support for10Gb internal network
    • B、Support for SSD
    • C、Support for integrated disk drives
    • D、Support for8Gb FC Switch Modules

    正确答案:A

  • 第19题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the full fabric internal fibre switches. Consequently， the customer is considering an N_Port ID Virtualization （NPIV） capable switch. Which of the following should be mentioned to the customer regarding the NPIV switch？（）
    A

    Youcan not use an NPIV switch in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch

    B

    Using blade servers with the NPIV switch will require morefibre ports on the external fibre switch

    C

    Storage devices likeFibre Channel Tape and Disk cannot be attached to the NPIV Switch but must connect to a core fabric switch.

    D

    The NPIV switch will count against the number of domains in a fabric


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A medical customer wants to deploy around 8TB integrated storage on a BladeCenter.Which of the following should be discussed with this customer？（）
    A

    SATA internal disks

    B

    iSCSI

    C

    Solid State Storage

    D

    SAS Internal Disk


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A customer wants to boot from SAN with their IBM BladeCenter infrastructure.  What is required for the customer to be able to perform this？ （）
    A

    4GB Modular Flash Drive for each Blade Server and Dual 15.8GB 2.5 Solid State Drive for each Blade Server 

    B

    Cisco Intelligent Gb Ethernet Switch Module and IBM BladeCenter Copper Pass-thru Module 

    C

    Fibre Channel Expansion Card for each Blade Server and Fibre Channel SAN Switch Module 

    D

    Cisco Intelligent Gb Ethernet Switch Module and Dual 15.8GB 2.5 Solid State Drive for each Blade Server


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A customer is considering an Intel processor-based blade solution from a competitor. The customer is willing to share only the information that the competitor offers 96 Xeon processors per rack.  Which of the following IBM BladeCenter E benefits should the Sales Specialist emphasize first？（）
    A

    Redundant Blowers

    B

    Availability of AMD and Intel Processors

    C

    Processor density

    D

    Advanced Management Module


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A customer wants to install an IBM BladeCenter infrastructure but is concerned about the cost of the internal fibre switches. Consequently. the customer wants to use the Optical Pass-Thru Module （OPM）.  What TRUE statement should be mentioned to the customer regarding the OPM？（）
    A

    You can not put the Optical Pass-Thru Module in the same IBM BladeCenter chassis as a Cisco Intelligent Ethernet Switch.

    B

    Using blade servers with the Optical Pass-Thru Module will require more fibre ports on the external fibre switch.

    C

    The Optical Pass-Thru Module does not provide the customer with an opportunity to reuse their fibre switch.

    D

    The blade servers do not work with the Optical Pass-Thru Module.


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    A customer wants to improve the utilization of the current capacity of their existing N series Tier 1production storage. What solution would the storage specialist discuss with the customer?（）
    A

     compression with IBM Real-time Compression Appliances 

    B

     deduplication with IBM ProtecTIER 

    C

     virtualization with IBM SVC 

    D

     file virtualization with SONAS


    正确答案： C
    解析： 暂无解析

相关内容