itgle.com

Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?()A. All VLANs except the default VLAN will be removed from all switches.B. All existing switches will have

题目
Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?()

A. All VLANs except the default VLAN will be removed from all switches.

B. All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.

C. The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.

D. The VLANs Servers, Management, Production, and no-where will be removed from existing switches.

相似考题

1.What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

2.Refer to Topic TestKing.com in iPAD document.What interface did Sw－AC3 associate with source MAC address 0010.5a0c.ffba?()A.Fa0/1B.Fa0/3C.Fa0/6D.Fa0/8E.Fa0/9F.Fa/12

3.What must an administrator do in order to successfully configure a VLAN trunk between two switches?()A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

4.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

参考答案和解析
参考答案：D
更多“Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?() ”相关问题

  • 第1题：

    Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?（）

    A.The design will function as intended

    B.Spanning-tree will need to be used.

    C.The router will not accept the addressing scheme.

    D.The connection between switches should be a trunk.

    E.The router interfaces must be encapsulated with the 802.1Q protocol.


    参考答案：C

  • 第2题：

    Refer to Topic TestKing.com in iPAD document.Which ports on TestKing3 are operating as trunks?（）

    • A、Fa0/1
    • B、Fa0/3
    • C、Fa0/4
    • D、Fa0/6
    • E、Fa0/9
    • F、Fa0/12

    正确答案:A,B,F

  • 第3题：

    Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?（）

    • A、All VLANs except the default VLAN will be removed from all switches.
    • B、All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.
    • C、The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.
    • D、The VLANs Servers, Management, Production, and no-where will be removed from existing switches.

    正确答案:D

  • 第4题：

    An 802.1Q trunk is not coming up between two switches. The ports on both switches are configured as "switchport mode desirable." Assuming that there is no physical issue， choose two possible causes.（）

    • A、Incorrect VTP domain
    • B、Incorrect VTP password
    • C、Incorrect VTP mode
    • D、Incorrect VTP configuration revision

    正确答案:A,B

  • 第5题：

    If you were to configure an ISL Ethernet trunk between two Cisco switches， named R1 and R2，   what would you have to include at the end of the link for the trunk to operate correctly？ （）

    • A、 An identical VTP mode.
    • B、 An identical speed/duplex.
    • C、 An identical trunk negotiation parameter.
    • D、 An identical trunk encapsulation parameter.

    正确答案:B,D

  • 第6题：

    On corporate network, hosts on the same VLAN can communicate with each other, but they are unable to communicate with hosts on different VLANs. What is needed to allow communication between the VLANs?（）

    • A、a router with subinterfaces configured on the physical interface that is connected to the switch
    • B、a router with an IP address on the physical interface connected to the switch
    • C、a switch with an access link that is configured between the switches
    • D、a switch with a trunk link that is configured between the switches

    正确答案:A

  • 第7题：

    单选题
    Refer to the exhibit. A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design?（）
    A

    The design will function as intended

    B

    Spanning-tree will need to be used.

    C

    The router will not accept the addressing scheme.

    D

    The connection between switches should be a trunk.

    E

    The router interfaces must be encapsulated with the 802.1Q protocol.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    Refer to Topic TestKing.com in iPAD document.To which port of TestKing3 is router VLAN-R1 connected?（）
    A

    Fa 0/1

    B

    Fa 0/3

    C

    Fa 0/6

    D

    Fa 0/8

    E

    Fa 0/9

    F

    Fa 0/12


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    Refer to Topic TestKing.com in iPAD document.What happens to the network when TestKingX is reconnected and a trunk exists between the two switches?（）
    A

    All VLANs except the default VLAN will be removed from all switches.

    B

    All existing switches will have the students, admin, faculty, Servers, Management,Production, and no-where VLANs.

    C

    The VLANs Servers, Management, Production, and no-where will replace the VLANs on SwX.

    D

    The VLANs Servers, Management, Production, and no-where will be removed from existing switches.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    多选题
    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）
    A

    STP root status

    B

    VTP mode

    C

    Negotiation status

    D

    Management domain

    E

    Configuration revision number


    正确答案： A,C
    解析： 暂无解析

  • 第11题：

    单选题
    Refer to Topic TestKing.com in iPAD document.Which switch is the root bridge for VLAN 1?（）
    A

    TestKingD

    B

    TestKing1

    C

    TestKing2

    D

    TestKing3


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）
    A

    Cisco Catalyst 2800

    B

    Cisco Catalyst 3550

    C

    Cisco Catalyst 3750

    D

    Cisco Catalyst 4500

    E

    Cisco Catalyst 6500


    正确答案： C,A
    解析： 暂无解析

  • 第13题：

    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）

    • A、A root VTP server
    • B、A trunk port
    • C、VTP priority
    • D、VLAN 1
    • E、None of the other alternatives apply

    正确答案:B,D

  • 第14题：

    Which two series of Cisco Catalyst switches， when placed in the distribution layer， effectively pass high amounts of network traffic between the core and access layers while aggregating access？ （）

    • A、 Cisco Catalyst 2800
    • B、 Cisco Catalyst 3550
    • C、 Cisco Catalyst 3750
    • D、 Cisco Catalyst 4500
    • E、 Cisco Catalyst 6500

    正确答案:D,E

  • 第15题：

    Refer to Topic TestKing.com in iPAD document.Which switch is the root bridge for VLAN 1?（）

    • A、TestKingD
    • B、TestKing1
    • C、TestKing2
    • D、TestKing3

    正确答案:A

  • 第16题：

    Refer to Topic TestKing.com in iPAD document.To which port of TestKing3 is router VLAN-R1 connected?（）

    • A、Fa 0/1
    • B、Fa 0/3
    • C、Fa 0/6
    • D、Fa 0/8
    • E、Fa 0/9
    • F、Fa 0/12

    正确答案:C

  • 第17题：

    Two Company switches are connected via a trunk using VTP. Which VTP information does a  Catalyst switch advertise on its trunk ports when using VTP？（）

    • A、STP root status
    • B、VTP mode
    • C、Negotiation status
    • D、Management domain
    • E、Configuration revision number

    正确答案:D,E

  • 第18题：

    多选题
    Refer to Topic TestKing.com in iPAD document.Which ports on TestKing3 are operating as trunks?（）
    A

    Fa0/1

    B

    Fa0/3

    C

    Fa0/4

    D

    Fa0/6

    E

    Fa0/9

    F

    Fa0/12


    正确答案： E,D
    解析： 暂无解析

  • 第19题：

    单选题
    Refer to the exhibit.All switch ports are assigned to the correct VLANs, but none of the hosts connected to SwitchA can communicate with hosts in the same VLAN connected to SwitchB. Based on the output shown, what is the most likely problem?（）
    A

    The access link needs to be configured in multiple VLANs.

    B

    The link between the switches is configured in the wrong VLAN.

    C

    The link between the switches needs to be configured as a trunk.

    D

    VTP is not configured to carry VLAN information between the switches.

    E

    Switch IP addresses must be configured in order for traffic to be forwarded between the switches


    正确答案： D
    解析： 暂无解析

  • 第20题：

    多选题
    What must an administrator do in order to successfully configure a VLAN trunk between two switches?（）
    A

    Set each end of the trunk line to IEEE 802.1Q encapsulation.

    B

    Set the same VTP management domain name on both switches.

    C

    Set all ports on the two switched as access ports.

    D

    Configure one of the two switches as a VTP server.

    E

    Connect the two switches using a rollover cable.

    F

    Use a router to forward VTP traffic between the VLANs.


    正确答案： A,D
    解析： 暂无解析

  • 第21题：

    单选题
    When there are cordial relations between the two countries, we mean there exists a ______ relationship between them.
    A

    friendly

    B

    hostile

    C

    fertile

    D

    complicated


    正确答案： A
    解析：
    句意：当两国之间的关系十分亲切的时候，我们就说它们之间存在着非常友好的关系。friendly友好的。hostile有敌意的。fertile肥沃的，富饶的。complicated复杂的。

  • 第22题：

    多选题
    To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?（）
    A

    Each end of the trunk line must be set to IEEE 802.1E encapsulation.

    B

    The VTP management domain name of both switches must be set the same.

    C

    All ports on both the switches must be set as access ports.

    D

    One of the two switches must be configured as a VTP server.

    E

    A rollover cable is required to connect the two switches together.

    F

    A router must be used to forward VTP traffic between VLANs.


    正确答案： C,E
    解析： 暂无解析

  • 第23题：

    多选题
    You need to investigate a VTP problem between two Company switches. The lack of which two  prevents VTP information from propagating between switches？（）
    A

    A root VTP server

    B

    A trunk port

    C

    VTP priority

    D

    VLAN 1

    E

    None of the other alternatives apply


    正确答案： E,C
    解析： 暂无解析

  • 第24题：

    多选题
    If you were to configure an ISL Ethernet trunk between two Cisco switches， named R1 and R2，   what would you have to include at the end of the link for the trunk to operate correctly？ （）
    A

    An identical VTP mode.

    B

    An identical speed/duplex.

    C

    An identical trunk negotiation parameter.

    D

    An identical trunk encapsulation parameter.


    正确答案： C,B
    解析： 暂无解析

相关内容